Search   
MSDS 
:
 5-Chloro-1,3-dimethoxybenzene, 97+%
CAS 
:
 7051-16-3
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7051-16-3 |5-Chloro-1,3-dimethoxybenzene | 97+% | 230-330-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
No information found.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 7051-16-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 34 - 36 deg C
Autoignition Temperature: Not available.
Flash Point: 112 deg C ( 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H9ClO2
Molecular Weight: 172.61

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7051-16-3: CZ0320000
LD50/LC50:
Not available.
Carcinogenicity:
5-Chloro-1,3-dimethoxybenzene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7051-16-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7051-16-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7051-16-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methyl-5-Methoxycarbonyl-1-Benzyl-4-Piperidone Hydrochloride, 99% 0-01-1
4-Decanol, 99% 2051-31-2
5-Chloro-1,3-dimethoxybenzene, 97+% 7051-16-3
Bis-(Benzonitrile)-Palladium(II)Chloride, 99+% 14220-64-5
N-(1-Anilinonaphthyl-4)-Maleimide 50539-45-2
4-Chloro-O-Anisic Acid, 99% 57479-70-6
Furfuryl Mercaptan, 97% 98-02-2
4-Methoxybenzenethiol, 98% 696-63-9
6-Dimethylaminopurine 938-55-6
2-Amino-4,6-Dichloropyrimidine, Tech. 56-05-3
2,4-Dihydroxy-n-(2-Hydroxyethyl)benzamide, 99% (TLC) 24207-41-8
Brucine dihydrate, 99% 145428-94-0
2-Indanol, 99% 4254-29-9
Trifluoroacetic Acid, Ammonium Salt, 98% 3336-58-1
10-Methylphenothiazine 1207-72-3
Trimethyl Phosphate, P.A. 512-56-1
4-Bromotoluene, 99% 106-38-7
Ethylenediaminetetraacetic Acid Copper, Disodium Salt Dihydrate, 98% 61916-40-3
3-Methylsalicylic acid, 99% 83-40-9
5-Benzyloxytryptamine hydrochloride, 98% 52055-23-9
3-Formylsalicylic acid, 97% 610-04-8
3-Methylcyclopentanol, 99%, mixture of isomers 18729-48-1
L(-)-Dibenzoyl-L-tartaric acid monohydrate , 98% 2743-38-6
1-Phenoxy-2-propanol,97% 770-35-4
Ethyl 2(2-Aminothiazole-4-yl)-2-Methoxyiminoacetate, 98% 64485-88-7
Borane-tetrahydrofuran complex, 1M solution in tetrahydrofuran 109-99-9
N-Phenyl-P-Phenylenediamine Monohydro-Chloride, 99% (Titr.) 2198-59-6
Dipentaerythritol, 90% 126-58-9
2,4'-Dipyridyl, 97+% 581-47-5
N,N-Bis(2-Cyanoethyl)Formamide 3445-84-9
L-(+)-Lysine Monohydrate 99% 39665-12-8
Albizziin, 98% 1483-07-4
2-Methyltetrahydrofuran-3-one, 98% 3188-00-9
N-Acryloyltris(Hydroxymethyl)aminomethane (Nat) 13880-05-2
Sulforhodamine 101 (Free Acid), Laser Grade, 99% (UV-Vis) 82354-19-6
Progesterone, 98% 57-83-0
5-Bromo-2-Fluorobenzaldehyde, 98% 93777-26-5
5-Amino-3-Methylisothiazole Hydrochloride 52547-00-9
Pentafluoropropionic Anhydride 356-42-3
Albumine bovine serum,additional reagent for igss, protease free
D-(+)-Methioninol 87206-44-8
alpha-Chloro-o-xylene, 99% 552-45-4
2-(5-Bromo-2-Pyridylazo)-5- (Diethylamino)Phenol, 99+% (Titr.) 14337-53-2
(S)-(+)-alpha-Methoxy-alpha-trifluoro-methylphenylacetyl chloride, 20445-33-4
(1S,2S,3R,5S)-(+)-2,3-Pinanediol, 98% 18680-27-8
Molecular Sieves, 3A, 8 to 12 Mesh 308080-99-1
1-Methyl-4-piperidone, 98% 1445-73-4
2-Amino-6,7-Dimethyl-4-Hydroxypteridine 611-55-2
Dinonyl Phthalate 84-76-4
Phenyl sulfoxide, 97% 945-51-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net