Search   
MSDS 
:
 2-Chlorobenzyl Chloride, 98+%
CAS 
:
 611-19-8
SYNONYMS 
:
 OCBC; O-Chlorobenzyl Chloride; !-Chloro-2-(Chloromethyl)Benzene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 611-19-8 |2-Chlorobenzyl Chloride | 98+% | 210-258-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN N
Risk Phrases: 20/21/22 36 43 51/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes. May cause sensitization by skin contact. Toxic
to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.Dangerous for the environment.Combustible
liquid.Moisture sensitive.Lachrymator (substance which increases the
flow of tears).

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. Lachrymator
(substance which increases the flow of tears). May cause chemical
conjunctivitis and corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities. May cause sensitization by skin contact.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause liver and kidney damage. May cause cardiac
disturbances. May cause central nervous system depression.
Inhalation:
May cause respiratory tract irritation. May cause liver and kidney
damage. Aspiration may lead to pulmonary edema. May cause cardiac
abnormalities. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
May cause liver and kidney damage. Repeated exposure may cause
central nervous system damage. Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Combustible liquid. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Vapors may form an explosive mixture with air. Containers may
explode when heated. Runoff from fire control or dilution water may
cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. DO NOT USE WATER! Do NOT get water
inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Use with adequate ventilation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Avoid contact with
skin and eyes. Empty containers retain product residue, (liquid
and/or vapor), and can be dangerous. Keep container tightly closed.
Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not allow contact with water. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames. Keep from contact with moist air and
steam.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 611-19-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless - pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: 200 mbar @ 50 C
Viscosity: Not available.
Boiling Point: 213 - 214 deg C @ 7mmHg
Freezing/Melting Point: -13 deg C
Autoignition Temperature: Not applicable.
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >300 deg C
Solubility in water: insoluble in most common solvents (react
Specific Gravity/Density: 1.2740g/cm3
Molecular Formula: ClC6H4CH2Cl
Molecular Weight: 161.03

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, alcohols, amines, bases, oxidizing agents, steel, heat.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 611-19-8: CZ0195000
LD50/LC50:
CAS# 611-19-8: Inhalation, rat: LC50 = >1140 mg/m3/1H.
Carcinogenicity:
2-Chlorobenzyl Chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CHLOROBENZYLCHLORIDES
Hazard Class: 6.1
UN Number: 2235
Packing Group: III
IMO
Shipping Name: CHLOROBENZYLCHLORIDES
Hazard Class: 6.1
UN Number: 2235
Packing Group: III
RID/ADR
Shipping Name: CHLOROBENZYL CHLORIDES
Hazard Class: 6.1
UN Number: 2235
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN N
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36 Irritating to eyes.
R 43 May cause sensitization by skin contact.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 14C Keep away from water, acids and alkali.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 611-19-8: 2
Canada
CAS# 611-19-8 is listed on Canada's NDSL List.
CAS# 611-19-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 611-19-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lanthanum(iii)chloride hydrated,64.5-70% LaCl3 20211-76-1
2-Fluorobenzyl bromide, 98% 446-48-0
4-Ethylpyridine, 98% 536-75-4
EEDQ, 99+% 16357-59-8
Oxalic acid, anhydrous 144-62-7
Lithium acetate dihydrate, 98% 546-89-4
2-Bromopropane, 99% 75-26-3
Calcium Turnings, 99.5% 7440-70-2
Tungsten(vi)chloride, 99.9+% 13283-01-7
Fluorescein Diacetate, 99% (UV-VIS) 596-09-8
Brucine 357-57-3
1-Heptanesulfonic acid sodium salt pre- mixed concentrate (low uv) 0-00-0
(R)-(+)-2-Bromopropionic acid, 99% (>85% e.e.) 598-72-1
Phenoxy-2-Propanone, 99% 621-87-4
2,5-Diphenylfuran 955-83-9
5-Methoxyindole-3-acetic acid, 99% 3471-31-6
2-Nitrobenzaldehyde Tosylhydrazone, 99% 58809-90-8
4-(4-Dimethylaminophenylazo)Benzoic Acid Sodium Salt, 98% (UV-VIS) 845-46-5
2-Furaldehyde diethyl acetal, 98% 13529-27-6
New methylene Blue N, 85% (titr.) 1934-16-3
Chromium(II) chloride, 90% 10049-05-5
3-Methyl-2(3H)-benzoxazolethione, 97% 13673-63-7
l-(-)-Allose, 99% 7635-11-2
1-Ethyl-1,4-Dihydro-5H-Tetrazol-5-One 98+% 69048-98-2
Benzohydroxamic acid, 99% 495-18-1
3-(2,3,4-TRIMETHOXYPHENYL)PROPIONIC ACID, 98+% 33130-04-0
2-N-decylaminoethanethiol, 95% 5891-06-5
DL-1,2-Hexanediol, 98+% 6920-22-5
Jenner stain, high purity biological stain 62851-42-7
(4-Bromophenyl)cyclopropylmethanone 6952-89-2
5-Nitro-m-xylene, 99+% 99-12-7
8-Chlorotheophylline, 99%(Titr.) 85-18-7
Cadmium sulfide, 99.999%, -325 Mesh 1306-23-6
Zincon, monosodium salt monohydrate, 80% 0-00-0
2-Chlorobenzyl Chloride, 98+% 611-19-8
Methyl 3-hydroxyisoxazole-5-carboxylate, 99% 10068-07-2
(2S)-2-Boc-Amino-3-Phenylsulfonyl-1-(2-Tetrahydropyranyloxy)Propane, 0-01-1
Propylamine, 99+% 107-10-8
2-Naphthyl Sulfate, Potassium Salt, Hydrate ,99% 21409-32-5
M-Hydroxyphenylacetic Acid, 99+% 621-37-4
Methacrylamide, 98% 79-39-0
1,2,3,4-Dibenzanthracene, 97% 215-58-7
3-Methyl-5-Methoxycarbonyl-4-Piperidone Hydrochloride, 99% 0-00-0
Benzyltributylammonium chloride, 98+% 23616-79-7
N-Acetyl-S-benzyl-L-cysteine methyl ester 77549-14-5
4-Octyloxybenzaldehyde, 98% 24083-13-4
Xylenol blue, indicator grade 125-31-5
1,9-Nonanediol, 99% 3937-56-2
4-(P-Chlorobenzoyl)-Pyridine, 99% 14548-48-2
4-Chlorophenyl Sulfoxide, 97% 3085-42-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net