Search   
MSDS 
:
 2-Chloro-5-Methylphenol, 99%
CAS 
:
 615-74-7
SYNONYMS 
:
 4-Chloro-3-Hydroxytoluene; 6-Chloro-M-Cresol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 615-74-7 |2-Chloro-5-Methylphenol | 99% | 210-444-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 21/22 38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Irritating to skin.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause liver and
kidney damage. May cause cardiac disturbances. May cause central
nervous system effects.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. May cause respiratory tract irritation. May cause liver and
kidney damage. May cause cardiac abnormalities.
Chronic:
May cause liver and kidney damage. Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Containers may explode when heated. Combustible material; may burn
but does not ignite readily. Runoff from fire control or dilution
water may cause pollution.
Extinguishing Media:
Do NOT get water inside containers. Do NOT use straight streams of
water. For small fires, use dry chemical, carbon dioxide, or water
spray. Cool containers with flooding quantities of water until well
after fire is out. For large fires, use water spray, fog or regular
foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 615-74-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: beige
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 196 deg C @ 760.00mmHg
Freezing/Melting Point: 46.00 - 48.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 81 deg C ( 177.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.2150g/cm3
Molecular Formula: C7H7ClO
Molecular Weight: 142.58

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, bases, brass, copper, copper alloys, steel, acid
anhydrides, acid chlorides.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 615-74-7: SK4930000
LD50/LC50:
Not available.
Carcinogenicity:
2-Chloro-5-Methylphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CHLOROCRESOLS, SOLID
Hazard Class: 6.1
UN Number: 2669
Packing Group: II
IMO
Shipping Name: CHLOROCRESOLS, SOLID
Hazard Class: 6.1
UN Number: 2669
Packing Group: II
RID/ADR
Shipping Name: CHLOROCRESOLS
Hazard Class: 6.1
UN Number: 2669
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 38 Irritating to skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 615-74-7: No information available.
Canada
CAS# 615-74-7 is listed on Canada's NDSL List.
CAS# 615-74-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 615-74-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,7-Naphthalenedisulfonic acid disodium salt, 95+% (uv-vis) 1655-35-2
1-(O-Tolyl)Piperazine Dihydro-Chloride, 98% (Titr.) 70849-60-4
3-Amino-1,2-propanediol, 98% 616-30-8
1-Bromo-2,6-difluorobenzene 64248-56-2
2,4-Dichloroaniline, 98% 554-00-7
5-Hexen-2-one, 98% 109-49-9
5-FLUORESCEIN ISOTHIOCYANATE (CERT) 3326-32-7
Coumarin 4, Laser Grade 90-33-5
2-Chloro-5-Methylphenol, 99% 615-74-7
3-Methyl-2-thiophenecarboxaldehyde, tech. 5834-16-2
Cesium Hydroxide, 99.5%, Monohydrate, may contain various amounts of 35103-79-8
Ethyl sulfone, 99+% 597-35-3
Diglycolic Anhydride, 97% 4480-83-5
Methyl Trifluoromethanesulfonate, 96+% (GC ) 333-27-7
Carbohydrazide, 97% (Titr.) 497-18-7
4-Hydroxy-3-Nitrophenylacetic Acid, 99% 10463-20-4
3-(5-Fluoro-2,4-dinitroanilino)-PROXYL, free radical, 98% 73784-45-9
4,5-Dihydro-6-Methyl-3(2H)-Pyridazinone Hydrate, 98% 0-00-1
Bes (N,N-Bis-(2-Hydroxyethyl)-2- Aminoethanesulfonic Acid), 99+% 10191-18-1
1,5-bis(methylamino)-3-oxapentane, 98%
Ursodeoxycholic acid, 99% 128-13-2
4'-Chloropropiophenone, 97% 6285-05-8
N-[3-(Trimethoxysilyl)propyl]ethylenediamine, 97% 1760-24-3
Mordant brown 6 6247-28-5
2,4-Dichlorobenzaldehyde, 98% 874-42-0
2,3-Dichloro-1-propanol 616-23-9
N-Acryloxysuccinimide, 99% (Titr.) 38862-24-7
Pyrazine, 99+% 290-37-9
Phenylacetaldehyde (50% wt in isopropyl alcohol) 67-63-0
Glyoxylic acid, 50% in water 298-12-4
Neutron activation standard, long irradiation i
1,2,4-Triacetoxybenzene, 97% 613-03-6
3,5-Di-Tert.-Butyl-4-Hydroxybenzaldehyde, 97% 1620-98-0
N-Ethylmorpholine, 99% 100-74-3
BOC-L-Threonine, 98% 2592-18-9
3-Chlorotoluene, 97% 108-41-8
Benzoyl cyanide 98% 613-90-1
2-(3-Chloropropyl)-2-(4-fluorophenyl)-1,3 -dioxolane, 97% 3308-94-9
Propiophenone, 99% 93-55-0
2,5-Dichlorobenzoic acid, 97% 50-79-3
Cyclononanone, 95% 3350-30-9
Cis-2-Hydroxymethyl-1-Cyclohexylamine, Hydrochloride, 99% 5691-37-2
Methyl Viologen hydrate 1910-42-5
Sesamol, 98% 533-31-3
Ethylmalonic acid, 97% 601-75-2
4-Hydroxybenzoic acid hydrazide 98% 5351-23-5
4-Hydroxyisophthalic Acid, 98% 636-46-4
Phenylselenyl iodide, 99+% 81926-79-6
2-Methylcyclopentanone, 99% 1120-72-5
3-Methyl-3-methoxybutanol, 99% 56539-66-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net