Search   
MSDS 
:
 4-Hydroxyisophthalic Acid, 98%
CAS 
:
 636-46-4
SYNONYMS 
:
 4-Hydroxy-1,3-benzenedicarboxylic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 636-46-4 |4-Hydroxyisophthalic acid | 98 | 211-258-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. Causes gastrointestinal tract irritation.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 636-46-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 314.00 - 315.00 deg C
Autoignition Temperature: Not available.
Flash Point: 314 deg C ( 597.20 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: 314 deg C
Solubility in water: 1g/3l (24 c)
Specific Gravity/Density:
Molecular Formula: C8H6O5
Molecular Weight: 182.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 636-46-4: NT2544000
LD50/LC50:
Not available.
Carcinogenicity:
4-Hydroxyisophthalic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 636-46-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 636-46-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 636-46-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/19/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,7-Naphthalenedisulfonic acid disodium salt, 95+% (uv-vis) 1655-35-2
1-(O-Tolyl)Piperazine Dihydro-Chloride, 98% (Titr.) 70849-60-4
3-Amino-1,2-propanediol, 98% 616-30-8
1-Bromo-2,6-difluorobenzene 64248-56-2
2,4-Dichloroaniline, 98% 554-00-7
5-Hexen-2-one, 98% 109-49-9
5-FLUORESCEIN ISOTHIOCYANATE (CERT) 3326-32-7
Coumarin 4, Laser Grade 90-33-5
2-Chloro-5-Methylphenol, 99% 615-74-7
3-Methyl-2-thiophenecarboxaldehyde, tech. 5834-16-2
Cesium Hydroxide, 99.5%, Monohydrate, may contain various amounts of 35103-79-8
Ethyl sulfone, 99+% 597-35-3
Diglycolic Anhydride, 97% 4480-83-5
Methyl Trifluoromethanesulfonate, 96+% (GC ) 333-27-7
Carbohydrazide, 97% (Titr.) 497-18-7
4-Hydroxy-3-Nitrophenylacetic Acid, 99% 10463-20-4
3-(5-Fluoro-2,4-dinitroanilino)-PROXYL, free radical, 98% 73784-45-9
4,5-Dihydro-6-Methyl-3(2H)-Pyridazinone Hydrate, 98% 0-00-1
Bes (N,N-Bis-(2-Hydroxyethyl)-2- Aminoethanesulfonic Acid), 99+% 10191-18-1
1,5-bis(methylamino)-3-oxapentane, 98%
Ursodeoxycholic acid, 99% 128-13-2
4'-Chloropropiophenone, 97% 6285-05-8
N-[3-(Trimethoxysilyl)propyl]ethylenediamine, 97% 1760-24-3
Mordant brown 6 6247-28-5
2,4-Dichlorobenzaldehyde, 98% 874-42-0
2,3-Dichloro-1-propanol 616-23-9
N-Acryloxysuccinimide, 99% (Titr.) 38862-24-7
Pyrazine, 99+% 290-37-9
Phenylacetaldehyde (50% wt in isopropyl alcohol) 67-63-0
Glyoxylic acid, 50% in water 298-12-4
Neutron activation standard, long irradiation i
1,2,4-Triacetoxybenzene, 97% 613-03-6
3,5-Di-Tert.-Butyl-4-Hydroxybenzaldehyde, 97% 1620-98-0
N-Ethylmorpholine, 99% 100-74-3
BOC-L-Threonine, 98% 2592-18-9
3-Chlorotoluene, 97% 108-41-8
Benzoyl cyanide 98% 613-90-1
2-(3-Chloropropyl)-2-(4-fluorophenyl)-1,3 -dioxolane, 97% 3308-94-9
Propiophenone, 99% 93-55-0
2,5-Dichlorobenzoic acid, 97% 50-79-3
Cyclononanone, 95% 3350-30-9
Cis-2-Hydroxymethyl-1-Cyclohexylamine, Hydrochloride, 99% 5691-37-2
Methyl Viologen hydrate 1910-42-5
Sesamol, 98% 533-31-3
Ethylmalonic acid, 97% 601-75-2
4-Hydroxybenzoic acid hydrazide 98% 5351-23-5
4-Hydroxyisophthalic Acid, 98% 636-46-4
Phenylselenyl iodide, 99+% 81926-79-6
2-Methylcyclopentanone, 99% 1120-72-5
3-Methyl-3-methoxybutanol, 99% 56539-66-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net