Search   
MSDS 
:
 N-(2-Chlorobenzyloxycarbonyloxy)-Succinimide, 98%
CAS 
:
 65853-65-8
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 65853-65-8 |N-(2-Chlorobenzyloxycarbonyloxy)succin| 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Minimize dust generation and accumulation.
Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep refrigerated. (Store below
4C/39F.) Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 65853-65-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 101-105 C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C12H10ClNO5
Molecular Weight: 283.5267

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidants.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 65853-65-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-(2-Chlorobenzyloxycarbonyloxy)succinimide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 65853-65-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 65853-65-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 65853-65-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/04/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dimethyl Bromomalonate, Tech., 90% 868-26-8
(2-Iodoethyl)benzene, 97% 17376-04-4
2-Bromo-2-methylpropionic acid, 98% 2052-01-9
1-Bromo-2-Ethylbutane 3814-34-4
1-Amino-1-cyclopropanecarboxylic acid 22059-21-8
l-2-Aminoadipic acid, 98% 1118-90-7
l-Leucinamide hydrochloride, 99% 10466-61-2
N-(2-Chlorobenzyloxycarbonyloxy)-Succinimide, 98% 65853-65-8
Ethylpyrazine, 98% 13925-00-3
Sodium Metavanadate, 96% 13718-26-8
4-(Trifluoromethyl)Benzoyl Chloride, 97% 329-15-7
2,3,4,5,6-Pentafluorphenylacetic Acid, 99% 653-21-4
(alpha,alpha,alpha-Trifluoro-o-tolyl)acetic acid, 98% 3038-48-0
3-Fluoro-4-Nitrophenol, 99% 394-41-2
4-Fluorophenyl Methyl Sulfone, 99% 455-15-2
3-Chloro-4-Fluoronitrobenzene, 98% 350-30-1
2,5-Difluorobenzoic Acid, 98% 2991-28-8
6-Bromo-1-hexene, 98% 2695-47-8
n-Butylbenzylamine, 98% 2403-22-7
4-Hexylbiphenyl, 99% 59662-31-6
TRIFLUOROMETHYL IODIDE, 99% 2314-97-8
Fluorotribromomethane, 99+% 353-54-8
2,6-Difluoropyridine, 99% 1513-65-1
4,5-Dimethylthiazole, 97% 3581-91-7
Vanadium (IV) Fluoride 10049-16-8
3,5-Difluorophenol, 99% 2713-34-0
Hexafluoroglutaric Acid, 97% 376-73-8
3-Methylthiophene, 99+% 616-44-4
(Phenylsulfonyl)acetonitrile, 98% 7605-28-9
Busulfan, 98% 55-98-1
2,3-Dimethylbenzoic Acid, 98% 603-79-2
1-Tridecanol, 97% 112-70-9
3-Bromostyrene, 97% 2039-86-3
Tetrafluorophthalic acid, 98% 652-03-9
2-Acetyl-5-chlorothiophene, 99% 6310-09-4
4-Fluoro-Alpha-Methylbenzyl Alcohol, 99% 403-41-8
Hydantoin, 99% 461-72-3
3-Methyl-2-thiophenecarboxylic acid, 98% 23806-24-8
Methyl Vinyl Sulfone, 98% 3680-02-2
Dimethylaminosulfur Trifluoride 3880-03-3
3-Phenylglutaric acid 4165-96-2
1-(Trifluoromethyl)ethenyl Acetate, 99% 2247-91-8
4-Butoxybenzoic Acid, 98% 1498-96-0
4-Dodecyloxybenzoic acid, 98% 2312-15-4
N,N'-Bis(Salicylidene)ethylenediamine, 98% 94-93-9
4-Methyl-1,3-dioxane, 99% 1120-97-4
n-Methylsuccinimide, 99% 1121-07-9
4-Nonyloxybenzoic Acid, 97% 15872-43-2
4-Octyloxybenzoic Acid, 98% 2493-84-7
N,N'-Terephthalylidene-Bis(4-Butylaniline) , 99% 29743-21-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net