Search   
MSDS 
:
 2-(Trimethylsilyl)ethoxymethyl Chloride, Stabilized, Tech., 90%
CAS 
:
 76513-69-4
SYNONYMS 
:
 SEM-Cl
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 76513-69-4 |2-(Trimethylsilyl)ethoxymethyl chlorid| 90 | 278-483-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes burns.Moisture sensitive.Corrosive.Lachrymator
(substance which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. Ingestion of large amounts may cause CNS depression. May
cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause systemic effects. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT get water inside
containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers. A vapor suppressing foam may be
used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not ingest
or inhale. Do not allow contact with water. Discard contaminated
shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames. Keep from
contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Flammables-area.
Deep freeze (below -20C). Store protected from moisture. Store in a
cool, dry area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 76513-69-4:
United Kingdom, WEL - TWA: (listed as silica, amorphous): 6 mg/m3
(inhalable dust); 2.4 mg/m3 TWA (respirable dust)
United Kingdom, WEL - STEL: (listed as silica, amorphous): 18 mg/
STEL (inhalable dust); 7.2 mg/m3 STEL (respirable dust)

Russia: (listed as silica, amorphous): 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 57.0 - 59.0 deg C @ 8.00 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 46 deg C ( 114.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Decomposes.
Specific Gravity/Density: 0.9420 g/cm3
Molecular Formula: C6H15ClOSi
Molecular Weight: 166.72

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 76513-69-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(Trimethylsilyl)ethoxymethyl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 76513-69-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 76513-69-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 76513-69-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Ethyl-3-hydroxypiperidine, 98+% 13444-24-1
Betaine hydrochloride, 99% 590-46-5
Diethyl Malonate, 99+% 105-53-3
P-Fluorocinnamic Acid, 99% 459-32-5
Methanol 67-56-1
BOC-L-Serine, Tech., Hydrate, 93% 3262-72-4
Methyl Benzoate 93-58-3
4,4'-Methylenenbis(n,n-dimethylaniline), 99+% (titr.) 101-61-1
2-Ethyl thiophenol, 98% 4500-58-7
Methyl 3-aminobenzoate, 98% 4518-10-9
Triethyl Phosphate, 99% 78-40-0
Ethylene glycol monomethyl ether 109-86-4
Desyl Chloride, 98+% 447-31-4
Methyl Cellulose 9004-67-5
2,4-Dimethylphenol, 99% (GC) 105-67-9
Dimethyl phosphite (Pract), 98% (Titr.) 67-56-1
5-Bromo-2-Fluorobenzylamine Hydrochloride 99% 99725-13-0
1,1,1-Trichloroethane 71-55-6
Ethyl Propenyl Ether 928-55-2
Cellulose n,n-diethylaminoethyl ether 9013-34-7
3,4-Dichlorophenylacetonitrile, 98% 3218-49-3
n-Propyl ether, 99+% 111-43-3
Nickel Boride 12007-01-1
5-Bromo-2-Fluorocinnamic Acid, 98% (GC) 0-00-1
L-Carnitine, 99+% 541-15-1
5'-O-Dimethoxytrityl-N-Isobutyryl-Deoxyguanosine 68892-41-1
Methyl ethyl ketone 78-93-3
3-Cyclopentylpropionic acid, 98% 140-77-2
4-(2-Thienyl)butyric Acid , 98% 4653-11-6
1-Bromo-2-Naphthol, 98% 573-97-7
5-Amino-1H-Tetrazole 4418-61-5
5-Bromonicotinic Acid, 98% 20826-04-4
Cyclohexylphenylacetonitrile, 98% 3893-23-0
2-(Trimethylsilyl)ethoxymethyl Chloride, Stabilized, Tech., 90% 76513-69-4
P-Acetotoluidide 103-89-9
2,2,5,5-Tetramethyl-3-Pyrrolin-1-Oxyl- 3-Carboxylic Acid, 99% (Titr.) 2154-67-8
Dichloromethane 75-09-2
Methylene Iodide 75-11-6
N,N-Dimethyl-4,4'-Azodianiline 539-17-3
5-Tert-Butyl-1,3-Benzenedicarboxylic Acid 98% 2359-09-3
N-Acetyl-2-Phenylethylamine, 98% 877-95-2
Octyl aldehyde, 99% 124-13-0
Trimethyl 1,3,5-Benzenetricarboxylate 99% (TLC) 2672-58-4
Indophenol acetate 7761-80-0
3-Methylmercaptoaniline, 97% 1783-81-9
2-Methylbenzyl Alcohol, 98% 89-95-2
Triphenylphosphine Dibromide, ca.33% Bromine 1034-39-5
Tryptophol, 97% 526-55-6
2'-Hydroxy-4'-Methoxyacetophenone, 99% 552-41-0
alpha-Phenyl-2-toluic acid, 97% 612-35-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net