Search   
MSDS 
:
 Methyl ethyl ketone
CAS 
:
 78-93-3
SYNONYMS 
:
 2-Butanone; Ethyl methyl ketone; MEK; Methyl ethyl ketone.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 78-93-3 |Methyl ethyl ketone | >99 | 201-159-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36 66 67

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes. Repeated exposure may cause
skin dryness or cracking. Vapours may cause drowsiness and
dizziness.

Potential Health Effects
Eye:
Causes eye irritation. Vapors cause eye irritation.
Skin:
May be absorbed through the skin in harmful amounts. Repeated or
prolonged exposure may cause drying and cracking of the skin.
Ingestion:
May cause irritation of the digestive tract. Possible aspiration
hazard. May cause central nervous system depression.
Inhalation:
Causes respiratory tract irritation. Inhalation of vapors may cause
drowsiness and dizziness. May cause central nervous system effects
such as nausea and headache.
Chronic:
Chronic inhalation may cause effects similar to those of acute
inhalation. Prolonged or repeated skin contact may cause defatting
and dermatitis. Animal studies have reported that fetal
effects/abnormalities may occur when maternal toxicity is seen.
Chronic overexposure to vapors may cause lung damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
Potential for aspiration if swallowed. Get medical aid immediately.
Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Extremely flammable liquid and vapor. Vapor may
cause flash fire. Vapors are heavier than air and may travel to a
source of ignition and flash back. Vapors can spread along the ground
and collect in low or confined areas.
Extinguishing Media:
In case of fire, use carbon dioxide, dry chemical powder or
appropriate foam. Water may be ineffective because it will not cool
material below its flash point.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Use only with
adequate ventilation. Avoid breathing vapor.
Storage:
Keep away from sources of ignition. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits. Ventilation fans and other electrical
service must be non-sparking and have an explosion-proof design.
Exposure Limits
CAS# 78-93-3:
United Kingdom, WEL - TWA: 200 ppm TWA; 600 mg/m3 TWA
United Kingdom, WEL - STEL: 300 ppm STEL; 899 mg/m3 STEL
United States OSHA: 200 ppm TWA; 590 mg/m3 TWA
Belgium - TWA: 200 ppm VLE; 600 mg/m3 VLE
Belgium - STEL: 300 ppm VLE; 900 mg/m3 VLE
France - VME: 200 ppm VME; 600 mg/m3 VME
Germany: 200 ppm TWA; 600 mg/m3 TWA
Germany: Skin absorber
Japan: 200 ppm OEL; 590 mg/m3 OEL
Malaysia: 200 ppm TWA; 590 mg/m3 TWA
Netherlands: 200 ppm MAC; 590 mg/m3 MAC
Russia: 200 mg/m3 TWA
Spain: 200 ppm VLA-ED; 600 mg/m3 VLA-ED
Spain: 300 ppm VLA-EC; 900 mg/m3 VLA-EC

Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: sweetish odor - acetone-like
pH: Not available.
Vapor Pressure: 77.5 mm Hg @ 20 deg C
Viscosity: 0.41 cps @ 20 deg C
Boiling Point: 80 deg C @ 760 mm Hg
Freezing/Melting Point: -87 deg C
Autoignition Temperature: 404 deg C ( 759.20 deg F)
Flash Point: -7 deg C ( 19.40 deg F)
Explosion Limits, lower: 1.4 vol%@93C
Explosion Limits, upper: 11.4 vol%@93C
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 0.8050 g/ml
Molecular Formula: C4H8O
Molecular Weight: 72.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Becomes yellow over time.
Conditions to Avoid:
Ignition sources, excess heat, confined spaces.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, 2-propanol.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, peroxides.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 78-93-3: EL6475000
LD50/LC50:
CAS# 78-93-3: Draize test, rabbit, eye: 80 mg; Draize test, rabbit,
skin: 500 mg/24H Moderate; Draize test, rabbit, skin: 402 mg/24H
Mild; Inhalation, mouse: LC50 = 32 gm/m3/4H; Inhalation, rat: LC50 =
23500 mg/m3/8H; Oral, mouse: LD50 = 3000 mg/kg; Oral, rat: LD50 =
2737 mg/kg; Skin, rabbit: LD50 = 6480 mg/kg.
Carcinogenicity:
Methyl ethyl ketone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50 = 3220 mg/L; 96 Hr; UnspecifiedFish:
Bluegill/Sunfish: LC50 = 1690 mg/L; 96 Hr; UnspecifiedBacteria:
Phytobacterium phosphoreum: EC50 = 51.9 mg/L; 25 min; Microtox
testBacteria: Phytobacterium phosphoreum: EC50 =3373 mg/L; 30 min;
Microtox test

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ETHYL METHYL KETONE
Hazard Class: 3
UN Number: 1193
Packing Group: II
IMO
Shipping Name: ETHYL METHYL KETONE
Hazard Class: 3.2
UN Number: 1193
Packing Group: II
RID/ADR
Shipping Name: ETHYL METHYL KETONE
Hazard Class: 3
UN Number: 1193
Packing group: II
USA RQ: CAS# 78-93-3: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or
cracking.
R 67 Vapours may cause drowsiness and dizziness.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 78-93-3: 1
Canada
CAS# 78-93-3 is listed on Canada's DSL List.
CAS# 78-93-3 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 78-93-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/21/1999 Revision #7 Date: 6/07/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Ethyl-3-hydroxypiperidine, 98+% 13444-24-1
Betaine hydrochloride, 99% 590-46-5
Diethyl Malonate, 99+% 105-53-3
P-Fluorocinnamic Acid, 99% 459-32-5
Methanol 67-56-1
BOC-L-Serine, Tech., Hydrate, 93% 3262-72-4
Methyl Benzoate 93-58-3
4,4'-Methylenenbis(n,n-dimethylaniline), 99+% (titr.) 101-61-1
2-Ethyl thiophenol, 98% 4500-58-7
Methyl 3-aminobenzoate, 98% 4518-10-9
Triethyl Phosphate, 99% 78-40-0
Ethylene glycol monomethyl ether 109-86-4
Desyl Chloride, 98+% 447-31-4
Methyl Cellulose 9004-67-5
2,4-Dimethylphenol, 99% (GC) 105-67-9
Dimethyl phosphite (Pract), 98% (Titr.) 67-56-1
5-Bromo-2-Fluorobenzylamine Hydrochloride 99% 99725-13-0
1,1,1-Trichloroethane 71-55-6
Ethyl Propenyl Ether 928-55-2
Cellulose n,n-diethylaminoethyl ether 9013-34-7
3,4-Dichlorophenylacetonitrile, 98% 3218-49-3
n-Propyl ether, 99+% 111-43-3
Nickel Boride 12007-01-1
5-Bromo-2-Fluorocinnamic Acid, 98% (GC) 0-00-1
L-Carnitine, 99+% 541-15-1
5'-O-Dimethoxytrityl-N-Isobutyryl-Deoxyguanosine 68892-41-1
Methyl ethyl ketone 78-93-3
3-Cyclopentylpropionic acid, 98% 140-77-2
4-(2-Thienyl)butyric Acid , 98% 4653-11-6
1-Bromo-2-Naphthol, 98% 573-97-7
5-Amino-1H-Tetrazole 4418-61-5
5-Bromonicotinic Acid, 98% 20826-04-4
Cyclohexylphenylacetonitrile, 98% 3893-23-0
2-(Trimethylsilyl)ethoxymethyl Chloride, Stabilized, Tech., 90% 76513-69-4
P-Acetotoluidide 103-89-9
2,2,5,5-Tetramethyl-3-Pyrrolin-1-Oxyl- 3-Carboxylic Acid, 99% (Titr.) 2154-67-8
Dichloromethane 75-09-2
Methylene Iodide 75-11-6
N,N-Dimethyl-4,4'-Azodianiline 539-17-3
5-Tert-Butyl-1,3-Benzenedicarboxylic Acid 98% 2359-09-3
N-Acetyl-2-Phenylethylamine, 98% 877-95-2
Octyl aldehyde, 99% 124-13-0
Trimethyl 1,3,5-Benzenetricarboxylate 99% (TLC) 2672-58-4
Indophenol acetate 7761-80-0
3-Methylmercaptoaniline, 97% 1783-81-9
2-Methylbenzyl Alcohol, 98% 89-95-2
Triphenylphosphine Dibromide, ca.33% Bromine 1034-39-5
Tryptophol, 97% 526-55-6
2'-Hydroxy-4'-Methoxyacetophenone, 99% 552-41-0
alpha-Phenyl-2-toluic acid, 97% 612-35-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net