REICHHOLD CHEMICALS INC -- POLYLITE 32-737-00, 32-737-00
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXRFG
MSDS NAME: POLYLITE 32-737-00, 32-737-00
Responsible Party
Name: REICHHOLD CHEMICALS INC
Box: 13582
City: RESEARCH TRIANGLE PARK NC 27709
Info Phone: 800-874-1807
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: REICHHOLD CHEMICAL INC
Address: UNKNOWN
City: RESEARCH TRIANGLE PARK NC 27709
Phone: 800-874-5403
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: SKIN: PROLONGED OR FREQUENT CONTACT MAY CAUSE DEFATTING
& DRYNESS OF SKIN W/RESULTANT IRRITATION & POSSIBLE DERMATITIS.
STYRENE MAY BE ABSORBED THROUGH THE SKIN IN TOXIC AMOUNTS. EYES: MAY CAUSE
INJUR IES. MAY CAUSE LACHRYMATION (TEARS). INHALATION: VAPORS MAY CAUSE
MUCOUS MEMBRANE IRRITATION & UPPER (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: SEE "LR" VERSION, INGREDIENT 3, FOR ADDITIONAL
INFORMATION (FP N).
Signs And Symptions Of Overexposure: HLTH HAZ: RESPIRATORY TRACT DISCOMFORT.
HIGH CONCENTRATIONS MAY RESULT IN HEADACHE, NAUSEA, INSENSIBILITY & OTHER
CENTRAL NERVOUS SYSTEM EFFECTS. REPEATED EXPOSURE TO HIGH CONCENTRATIONS MAY
CAUSE LIV ER & KIDNEY DAMAGE. INGESTION: MAY CAUSE GASTROINESTINAL
DISTURBANCES, PAIN & DISCOMFORT.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH COPIOUS AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. SEEK IMMEDIATE MEDICAL AID. INHAL: REMOVE
VICTIM FROM EXPOSURE. IF VICTIM IS UNCONSCIOUS, ADMINISTER ARTIFICIAL
RESPIRATION AND/OR OXYGEN ASNEEDED. SEEK MEDICAL AID. INGEST: DO NOT INDUCE
VOMITING (ASPIRATION HAZARD). SEEK IMMEDIATE MEDICAL AID.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNIT. VENT AREA. ABSORB SPILL
W/ABSORB MATL SUCH AS SAWDUST, VERMICULITE OR SAND & PLACE IN CLSD CNTNR.
IF LG SPILL, DIKE AREA TO PVNT MATL FROM ENTERING WATER SYS OR SEWERS. ST
YRENE MONOMER RQ VALUE: 1000 LBS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISP MUST BE I/A/W FED, STATE & LOCAL REGS(FPN).
MATL TESTED & FOUND TO HAVE FL PT <140F. IF DISCARDED, MATL &
CNTNRS SHOULD BE TREATED AS HAZ WASTES BASED ON CHARACT OF IGNIT AS DEFINED
UNDER FED RCR A REGS (40CFR 261). DISP OF MATL & CNTNR, (SUPDAT)
Handling And Storage Precautions: AVOID STORAGE ABOVE 100F. AVOID PROLONGED OR
REPEATED SKIN CONTACT. AVOID INHALATION OF HEATED VAPORS OR SPRAY MISTS.
Other Precautions: AVOID IMPROPER ADDITION OF PROMOTER AND/OR CATALYST. A
PROMOTER AND CATALYST USED WITH THIS PRODUCT SHOULD ALWAYS BE MIXED
SEPARATELY WITH THE PRODUCT AND MUST NEVER BE MIXED TOGETHER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 89.0F,31.7C
Lower Limits: 1.1%
Extinguishing Media: WATER SPRAY, FOAM, DRY CHEMICAL, CARBON DIOXIDE OR ANY
CLASS B EXTINGUISHING AGENT.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). EQUIPMENT SHOULD BE THOROUGHLY DECONTAMINATED AFTER USE.
Unusual Fire/Explosion Hazard: AT ELEVATED TEMPS, SUCH AS IN FIRE, POLYM MAY
TAKE PLACE. IF POLYM TAKES PLACE IN CLSD CNTNRS, THERE IS POSS OF VIOLENT
RUPTURE OF CNTNR. PROD VAPS MAY (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF TLV OR PEL LISTED IN INGREDIENTS IS EXCEEDED, THEN
SUITABLE, NIOSH/MSHA APPROVED RESPIRATORY PROTECTION MUST BE WORN TO PREVENT
OVEREXPOSURE.
Ventilation: GEN VENT IS REQD DURING NORM USE. LOC VENT MAY BE REQD DURING
CERTAIN OPERATIONS TO KEEP EXPOSURE BELOW LISTED TLV.
Protective Gloves: IMPERVIOUS GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: WEAR PROTECTIVE CLOTHING TO PREVENT SKIN CONTACT.
EYE WASH STATION AND SAFETY SHOWER SHOULD BE AVAILABLLE.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FPN). EXPLO HAZ: FORM AN EXPLO MIX IN AIR. WASTE DISP
METH: REQS COMPLIANCE W/APPLIC LABELING, PACKAGING & RECORD KEEPING STDS.
EXTREME CARE SHOULD BE TAKEN TO ENSUREDISPOSAL IS ONLY IN FACILITY PERMITTED
FOR DISPOSAL OF HAZ WASTE. FOR
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 295F,146C
Vapor Density: HVR/AIR
Spec Gravity: 1.120
Evaporation Rate & Reference: SLOWER/N-BUTYL ACETATE
Appearance and Odor: PURPLE, CLEAR LIQUID; PUNGENT ODOR.
Percent Volatiles by Volume: 35-43
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT AND DIRECT SUNLIGHT.
Materials To Avoid: STRONG ACIDS AND OXIDIZING AGENTS.
Hazardous Decomposition Products: HEATING OF THIS MATERIAL TO DECOMPOSITION MAY
CAUSE THE EMISSION OF IRRITATING, ACRID FUMES.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: HEATING OF THIS MATERIAL TO DECOMPOSITION
MAY CAUSE THE EMISSION OF IRRITATING, ACRID FUMES.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: POLYLITE 32-737-00, 32-737-00
Company: REICHHOLD CHEMICAL INC
Street: UNKNOWN
City: RESEARCH TRIANGLE PARK NC
Zipcode: 27709
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/17/1995
Status Code: C
Label Date: 04/17/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE LIQUID CLASS 1C. ACUTE: SKIN: PROLONGED OR
FREQUENT CONTACT MAY CAUSE DEFATTING & DRYNESS OF SKIN W/RESULTANT IRRIT
& POSS DERMATITIS. STYRENE MAY BE ABSORBED THROUGH THE SKIN IN TOXIC
AMOUN TS. EYES: MAY CAUSE INJURIES. MAY CAUSELACHRYMATION (TEARS).
INHALATION: VAPORS MAY CAUSE MUCOUS MEMBRANE IRRIT & UPPER RESP TRACT
DISCOMFORT. HIGH CONCENT MAY RESULT IN HEADACHE, NAUSEA, INSENSIBILIT Y AND
OTHER CNS EFFECTS. INGESTION: MAY CAUSE GASTROINTESTINAL DISTURBANCES, PAIN
AND DISCOMFORT. CHRONIC: CANCER HAZARD. CONTAINS MATERIAL LISTED AS A CNS
CARCINOGEN (FP N).REPEATED EXPOSURE TO HIGH CONCENTRATIONS MAY CAUSE LIVER
AND KIDNEY DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
DRYLOK CLEAR ACRYLIC MASONRY TREATMENT, 133
| |
|
CLP-200, PESTICIDES MATRIX SPIKING SOLUTION IN(SUPDAT)
| 67-56-1
309-00-2
58-89-9
50-29-3
60-57-1
72-20-8
76-44-8 |
|
HYLAC SILICONIZED POLISH, 82708
| 8032-32-4
64475-85-0
71-55-6
74-98-6
106-97-8 |
|
CITRUS LOTION HAND CLEANER W/PUMICE 1717, AB7A128
| |
|
8110 PART A
| |
|
US-101, BASE/NEUTRALS MIX #2 AT 2000 UG/ML IN(SUPDAT)
| 75-09-2
103-33-3
91-58-7
95-50-1
541-73-1
106-46-7
121-14-2
606-20-2
118-74-1
87-68-3
77-47-4
67-72-1
78-59-1
98-95-3
120-82-1 |
|
S-5 SUPER CLEAN
| |
|
HI-SPOT BLUE BASE 107, 83107
| |
|
HI-SPOT BLUE BASE 107, 83307
| |
|
HI-SPOT BLUE BASE 107, 83507
| |
|
CFR-1 CLEANER
| 67-64-1
67-63-0
106-97-8
74-98-6 |
|
2240, SILICA STANDARD, 10 PPM TO 1000 PPM (SUPDAT)
| 13517-24-3
7732-18-5 |
|
2239, SILICA STANDARD, 10 PPM TO 1000 PPM (SUPDAT)
| 13517-24-3
7732-18-5 |
|
GPU6, SILICA STANDARD, 10 PPM TO 1000 PPM (SUPDAT)
| 13517-24-3
7732-18-5 |
|
PRITT GLUE STICK
| |
|
BIO T BRAKE CLEANER
| |
|
TRIM SC 210
| |
|
PERMATEX GASKET REMOVER, 80646
| 75-09-2
67-63-0
1330-20-7
75-28-5
74-98-6
100-41-4
8052-41-3
9004-65-3
141-43-5
7732-18-5 |
|
AMPULE 4 (COLORLESS), HYDROCHLOR Q4000 (SUPP DATA)
| |
|
GUARDEX CHLORINATING CONCENTRATE FOR SPAS
| 2893-78-9 |
|
HYDROTECH GRANULAR CONCENTRATE
| 2893-78-9 |
|
SUPER BONDER 409 INDUST GRADE GEL INST ADH, 40945
| 7085-85-0
9011-14-7
112945-52-5
123-31-9 |
|
DURALUM DURATRED
| |
|
DURALUM NIAGARA BLAST
| |
|
DURALUM LT P&C
| |
|
DURALUM G82
| |
|
DURALUM G52E
| |
|
DURALUM RF D/C FINES
| |
|
DURALUM RF
| |
|
DURALUM POLISHING GRAINS & POWDERS
| |
|
DURALUM MICROGRITS
| |
|
FORMULA 909 DECK AND AIRCRAFT CLEANER
| |
|
POLYLITE 32-737-00, 32-737-00
| |
|
PHILLYBOND TA-30 HARDENER
| |
|
BOD NUTRIENT BUFFER PILLOWS, 14862
| 7758-11-4
7558-79-4
7487-88-9
10043-52-4
7778-77-0
12125-02-9
10025-77-1
7732-18-5 |
|
TAPMATIC DUAL ACTION AQUACUT CUTTING FLUID, 01216
| 107-21-1
67-63-0 |
|
ANTISTATIC SCREEN CLEANER, AX1261
| |
|
STM-380, INTERNAL STANDARD MIXTURE AT 2000 (SUPDAT)
| 67-56-1
460-00-4
3855-82-1 |
|
EVERLUBE 13-620 RTA (10-245)
| |
|
CC410EP EPOXY SKIDPROOFAR, PART A
| 25068-38-6
112-57-2
107-15-3
4067-16-7
7732-18-5
107-98-2
64-19-7
8052-41-3
104-78-9
111-76-2
57-55-6
108-65-6
13463-67-7
12001-26-2
1333-86-4 |
|
CC410EP EPOXY SKIDPROOFAR, PART B
| 25068-38-6
68609-97-2 |
|
4860A ACCELERATOR
| |
|
DIRECTIGEN INFLUENZA A, 0286616
| 71-36-3 |
|
PHILLYCLAD 1025 SAFETY YELLOW RESIN, 2725RC
| |
|
PHILLYCLAD 101 WHITE RESIN, 2701RC
| |
|
75-3465-8033-7, SCOTCHCAL BRAND SCREEN (SUPP DATA)
| 108-65-6
763-69-9
9011-14-7
9010-88-2
147-14-8
1317-65-3
80-62-6
108-88-3
140-88-5 |
|
SODIUM HYPOCHLORITE 10%+CL2, 11626
| 7681-52-9
1310-73-2 |
|
CLEANER/DEGREASER, 404-00-00001-0-001
| |
|
WELD-ON 2711 PVC PIPE CEMENT
| 9002-86-2
109-99-9
78-93-3
108-94-1
872-50-4 |
|
PS543
| 70900-21-9 |
|
|