ITW PHILADELPHIA RESINS -- PHILLYCLAD 1025 SAFETY YELLOW RESIN, 2725RC
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXRJR
MSDS NAME: PHILLYCLAD 1025 SAFETY YELLOW RESIN, 2725RC
Responsible Party
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DR
City: MONTGOMERYVILLE PA 18936
Info Phone: 215-855-8450
Emergency Phone Number: 800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DR
City: MONTGOMERYVILLE PA 18936
Phone: 215-855-8450
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DRIVE
Box: 454
City: MONTGOMERYVILLE PA 18936
Phone: 508-777-1100
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 3.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:EYES/SKIN:MODERATE IRRITANT. INHAL:MAY IRRITATE
RESPIRATORY TRACT CAUSING HEADACHES, NAUSEA, DIZZINESS &/OR NARCOSIS
WHICH IS TYPICAL FOR SOLVENT BASE PRODUCTS. INGEST:NO DATA. CHRONIC:PROLONGED
OR REPEATED EXPOSURE TO POLYAMIDE RESINS MAY CAUSE ASTHMA & SKIN
SENSITIZATION OR OTHER ALLERGIC (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:RESPONSES. OVEREXPOSURE TO
SOLVENTS ABOVE THEIR TLV'S MAY CAUSE LIVER & KIDNEY DISORDERS. ING
1:MODERATE SKIN SENSITIZER. ING 2:COMBUSTIBLE. ING 3:RESPIRATORY HAZARD; SKIN
& EYE IRRITANT; FLA MMABLE. ING 4:SKIN IRRITANT.
Medical Cond Aggravated By Exposure: PREEXISTING SKIN & EYE DISORDERS MAY
BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
First Aid: EYES:FLUSH W/CLEAN WATER FOR AT LEAST 15 MINUTES WHILE GENTLY
HOLDING EYELIDS OPEN. GET IMMED MED ATTN. SKIN:IMMEDIATELY REMOVE
CONTAMINATED CLOTHING & WASH W/PLENTY OF SOAP & WATER. GET MED ATTN
IF S YMPS PERSIST. INHAL:REMOVE PATIENT TO FRESH AIR. ADMINISTER OXYGEN IF
BRTHG IS DFCLT. GET MED ATTN. INGEST:DO NOT INDUCE VOMIT. GIVE VICTIM TWO
GLASSES OF MILK/WATER TO DILUTE. GET IMMED MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ELIMINATE ALL IGNITION SOURCES. AVOID PERSONAL
CONTACT. SCRAPE UP AS MUCH MATL AS POSSIBLE & PLACE IN A SUITABLE,
LABELED, CONTAINER FOR WASTE DISPOSAL. PREVENT MATL FROM CONTACTING ANY WATER
SOURCES/ SEWERS LEADING TO SURFACE WATER. RQ:100LBS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF I/A/W APPLICABLE FEDERAL, STATE & LOCAL
REGULATIONS. APPLIC CERCLA/RCRA HAZ WASTE CODES:U239 (XYLENE).
Handling And Storage Precautions: STORE IN AREA DESIGNED TO COMPLY W/ANSI/NFPA
30 FLAMMABLE & COMBUSTIBLE LIQUIDS CODE. KEEP AWAY FROM OPEN FLAMES &
HIGH TEMPERATURES.
Other Precautions: PRACTICE GOOD HOUSEKEEPING PROCEDURES TO AVOID ALL SKIN
CONTACT & BREATHING OF VAPORS. AVOID PROLONGED OR REPEATED INHALATION OF
HEATED VAPORS OR SPRAY MIST. AVOID PROLONGED OR REPEATED SKIN CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 80.0F,26.7C
Extinguishing Media: CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). WATER MAY BE USED TO COOL DOWN UNOPENED CONTAINERS IN THE
VICINITY.
Unusual Fire/Explosion Hazard: CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN AREA
WHERE SPARKS OR OPEN FLAMES ARE PRESENT.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OUTDOOR OR OPEN AREAS, USE NIOSH/MSHA APPROVED
RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES OF OVER SPRAY DURING SPRAY
APPLICATION. USE NIOSH/MSHA APPROVED RESPIRATORS IN CONFINED AREAS.
Ventilation: SUFFICIENT VENT IN VOL & PATTERN SHOULD BE PROVIDED TO KEEP
AIR CONTAM CONC BELOW CURRENT APPLIC OSHA PELS.
Protective Gloves: CHEMICAL RESISITANT RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N). CLEAN LONG-SLEEVE & LONG LEG CLOTHING.
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING & BEFORE SMOKING,
EATING OR USING TOILET FACILITIES.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDITIONAL INFORMATION (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >148F,>64C
Vapor Density: >1
Spec Gravity: 1.58
Solubility in Water: NIL
Appearance and Odor: YELLOW LIQUID W/AROMATIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXTREME HEAT, SPARKS & OPEN FLAMES.
Materials To Avoid: STRONG ACIDS & OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY FORM CO*2 & NITROGEN OXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PHILLYCLAD 1025 SAFETY YELLOW RESIN, 2725RC
Company: ITW PHILADELPHIA RESINS
Street: 130 COMMERCE DRIVE
PO Box: 454
City: MONTGOMERYVILLE PA
Zipcode: 18936
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 05/30/1995
Status Code: C
Label Date: 05/30/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. ACUTE:EYES/SKIN:MODERATE IRRITANT. INHAL:MAY
IRRITATE RESPIRATORY TRACT CAUSING HEADACHES, NAUSEA, DIZZINESS &/OR
NARCOSIS WHICH IS TYPICAL FOR SOLVENT BASE PRODUCTS. CHRONIC:PROLONGED OR R
EPEATED EXPOSURE TO POLYAMIDE RESINS MAY CAUSE ASTHMA & SKIN
SENSITIZATION OR OTHER ALLERGIC RESPONSES. OVEREXPOSURE TO SOLVENTS MAY CAUSE
LIVER & KIDNEY DISORDERS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.