ITW PHILADELPHIA RESINS -- PHILLYBOND TA-30 HARDENER
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXRFK
MSDS NAME: PHILLYBOND TA-30 HARDENER
Responsible Party
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DR
City: MONTGOMERYVILLE PA 18936
Info Phone: 215-855-8450
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DR
City: MONTGOMERYVILLE PA 18936
Phone: 215-855-8450
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DRIVE
Box: 454
City: MONTGOMERYVILLE PA 18936
Phone: 508-777-1100
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 4
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: MAY CAUSE IRRITATION AND POSSIBLY BURNS. SKIN: MAY
BE CORROSIVE TO SKIN. MAY CAUSE IRRITATION AND SENSITIZATION. INHALATION:
PRODUCT IS LOW IN VOLATILITY. EXCESSIVE INHALATION OF VAPORS MAY CAUS E
IRRITATION OF THE RESPIRATORY TRACT, NAUSEA AND VOMITING. INGESTION: MAY BE
HARMFUL IF SWALLOWED. (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: CHRONIC: REPEATED EXCESSIVE
OVEREXPOSURE MAY CAUSE ASTHMA AND SKIN SENSITIZATION OR OTHER ALLERGIC
RESPONSES. REPEATED EXCESSIVE OVEREXPOSURES TO DETA HAS CAUSED LIVER AND
KIDNEY EFFECTS IN LABORATORY ANIMALS.
Medical Cond Aggravated By Exposure: PREEXISTING SKIN AND EYE ALLERGIES MAY
INCREASE THE CHANCE OF DEVELOPING INCREASED ALLERGY SYMPTOMS FROM EXPOSURE.
First Aid: EYES: FLUSH WITH CLEAN WATER FOR AT LEAST 30 MINUTES WHILE GENTLY
HOLDING EYELIDS OPEN. GET IMMED MED ATTN. SKIN: IMMED REMOVE CONTAMD CLTHG
& WASH W/PLENTY OF SOAP & WATER. GET MED ATTN IF SYMPS PERS IST.
INHAL: REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. GET
MED ATTN. INGEST: DO NOT INDUCE VOMITING. GIVE PATIENT MILK OR WATER TO
DILUTE. IMMED CONSULT MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: AVOID PERSONAL CONTACT. SCRAPE UP AS MUCH MATERIAL AS
POSSIBLE AND PLACE IN A SUITABLE, LABELED, CONTAINER FOR WASTE DISPOSAL.
RESIDUE MAY BE REMOVED USING A SAFETY SOLVENT.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE
AND LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE WITH ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAME AND HIGH TEMPERATURES.
Other Precautions: PRACTICE GOOD HOUSEKEEPING PROCS TO AVOID ALL SKIN CNTCT
& BRTHG OF VAPS. AVOID PRLNG/RPTD INHAL OF HEATED VAPS OR SPRAY MIST.
AVOID PRLNG/RPTD SKIN CNTCT. IF PROD IS SANDED OR MACHINED AFTER CURING,
TAKE APPROP PRECS AGAINST (SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: 200F,93C
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS MAY RUPTURE WHEN EXPOSED TO
HIGH HEAT.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATORY PROTECTION REQUIRED IN
CONFINED AREAS. FOR EMERGENCIES, A NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS OR FULL FACE RESPIRATOR IS RECOMMENDED.
Ventilation: BREATHING OF VAPS MUST BE AVOIDED. VENT MUST BE SUFFICIENT TO
CONTROL VAPS. IN CONFINED AREAS, LOC VENT MAY BE REQD.
Protective Gloves: CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N). CLEAN LONG-SLEEVE & LONG LEG CLOTHING.
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING & BEFORE SMOKING,
EATING OR USING TOILET FACILITIES.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDITIONAL INFO (FP N). OTHER PRECS: INHAL OF NUISANCE
PARTICULATES. TLV-TWA OF 10 MG/M3 SHOULD BE OBSERVED. EYE PROT: & FULL
LENGTH FACESH IELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: DECOMPOSES
Vapor Pres: <0.01 @68F
Spec Gravity: 1.29
Solubility in Water: SLIGHT
Appearance and Odor: DARK GRAY PASTE WITH AMMONIACAL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS AND OPEN FLAMES.
Materials To Avoid: STRONG ACIDS, OXIDIZING MATERIAL, MINERAL ACIDS AND EPOXY
RESINS UNDER UNCONTROLLED CONDITIONS.
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE AND OXIDES OF
NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PHILLYBOND TA-30 HARDENER
Company: ITW PHILADELPHIA RESINS
Street: 130 COMMERCE DRIVE
PO Box: 454
City: MONTGOMERYVILLE PA
Zipcode: 18936
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/18/1995
Status Code: C
Label Date: 04/18/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: CORROSIVE. ACUTE: EYES: MAY CAUSE IRRITATION AND
POSSIBLY BURNS. SKIN: MAY BE CORROSIVE TO SKIN. MAY CAUSE IRRITATION AND
SENSITIZATION. INHALATION: EXCESSIVE INHALATION OF VAPORS MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT, NAUSEA AND VOMITING. INGESTION: MAY BE
HARMFUL IF SWALLOWED. CHRONIC: REPEATED EXCESSIVE OVEREXPOSURE MAY CAUSE
ASTHMA AND SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSE. REP EATED EXCESSIVE
OVEREXPOSURES TO DETA HAS CAUSED LIVER AND KIDNEY EFFECTS IN LABORATORY
ANIMALS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.