HYVAC PRODUCTS INC -- FLUSHING OIL, 93060
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCNDK
MSDS NAME: FLUSHING OIL, 93060
Responsible Party
Name: HYVAC PRODUCTS INC
Address: 660 HOLLOW RD
City: PHOENIXVILLE PA 19460
Info Phone: 610-983-0300
Emergency Phone Number: 215-278-0355
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HYVAC PRODUCTS INC
Box: 389
City: PHOENIXVILLE PA 19401-0389
Phone: 610-792-0500;610-983-0300
=======================================================
Ingredients
=======================================================
Cas: 64741-88-4
RTECS #: PY8040501
Name: MINERAL OIL, PETRO DISTILLATES, SOLV-REFINED (SEV) HEAVY PARAFFINIC;
(REFINED PETRO OIL(S)). LD50:(ORAL,RAT) >15 G/KG.
% Wt: 100
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Name: SUPP DATA:SURGICAL DEBRIDEMENT. IF NOT FAMILIAR W/TECHNIQUE, SEEK SKILLED
ADVICE.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 1.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:INHAL:LOW RISK OF INHAL. IN ENCLSD SPACES/WHEN HOT,
VAPS MAY REACH CONCS SUFFICIENT TO CAUSE DROW, DIZZ, HDCH, NAUS/LUNG IRRIT.
MISTS ABOVE TLV MAY CAUSE CHEM PNEUM. SKIN CONT:TRANSIENT, SLIGHT IRRIT. EYE
CONT:MAY BE MILDLY IRRIT. INGEST:GENERALLY LOW TOX. VERY LG AMTS MAY CAUSE
GENERALIZED (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:DEPRESS, HDCH, DROW, NAUS,
VOMIT/DIARR. SM DOSES MAY PRDCE IRRIT & DIARR. CHRONIC:PRLNG &/OR
FREQUENT CONT MAY CAUSE DRYING, CRACKING (DERM)/FOLLICULITIS. RPTD, EXCESSIVE
EXPOS TO MISTS/FUMES MAY INDUCE PULM IRRIT/CHRONIC BRONCH. TOX
SUMMARY:SLIGHTLY TOX, 1 PT TO 1 QT IS APPROX LETHAL ORAL DOSE FOR (SUPP DATA)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL:REMOVE TO FRESH AIR. RESP SUPPORT IF NEC. SEEK MED AID.
SKIN:WASH W/SOAP & WATER. DO NOT WEAR HEAVILY CONTAM CLTHG BEFORE
LAUNDERING. EYES:FLUSH W/LG VOLS OF WATER FOR AT LST 15 MINS. SEE MD IF ANY
COMPLICATIONS ARISE. INGEST:DO NOT INDUCE VOMIT. SEEK MED AID.
INJECTION:SUBCUTANEOUS INJECTION IS MED EMER - SEEK MED AID IMMED. NOTES TO
MD:FOLLOWING INGEST, AT VISCOSITY OF ABOUT 350 (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE SOURCES OF HEAT OR IGNITION, PROVIDE ADEQUATE
VENTILATION, CONTAIN LEAK. ABSORB SMALL SPILLS W/SUITABLE MATERIAL SUCH AS
RAGS, STRAW OR SAND. REPORT SPILLS AS REQUIRED TO APPROPRIATE AUTHORITIE S.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). IT IS THE RESPONSIBILITY OF USER TO DETERMINE IF MATL IS
HAZ WASTE AT TIME OF DISP. CHECK BEFORE DISPOSING TO BE SURE YOU ARE IN COMPL
IANCE W/ALL APPLICABLE LAWS & REGULATIONS.
Handling And Storage Precautions: STORE <150F. DO NOT APPLY HIGH HEAT OR
FLAME TO CONTAINER. KEEP SEPARATE FROM STRONG OXIDIZING AGENTS. AVOID
PROLONGED CONTACT W/USED OIL.
Other Precautions: EMPTY CONTAINERS MAY CONTAIN PROD RESIDUE WHICH COULD
INCLUDE FLAMM/EXPLO VAPORS. CONSULT APPROP FED, STATE & LOC AUTHS BEFORE
REUSING, RECONDITIONING, RECLAIMING, RECYCLING/DISPOSING OF EMPTY CNTNRS
&/OR WASTE RESIDUES OF THIS PRODUCT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 412F,211C
Extinguishing Media: CO*2, DRY CHEMICAL, FOAM OR WATER FOG.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: WATER MAY CAUSE FROTHING.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NORMALLY NONE REQUIRED. IF HIGH VAPOR OR MIST
CONCENTRATIONS EXPECTED - USE NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS
& MISTS.
Ventilation: VENTILATION IS REQUIRED WHEN WORK PLACE EXPOSURES EXCEED TLV.
Protective Gloves: OIL IMPERVIOUS GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH FOUNTAIN & DELUGE SHOWER (FP
N). WEAR BODY-COVERING WORK CLOTHES TO AVOID PRLNG/RPTD EXPOSURE.
Work Hygienic Practices: WASH SKIN THOROUGHLY W/SOAP & WATER. LAUNDER SOILED
WORK CLOTHES BEFORE REUSE.
Supplemental Safety and Health: VP:<0.0001 @ 20C. EVAP RATE:1000 X SLOWER
(ETHYL ETHER=1). EFTS OF OVEREXP:150 LBS HUMAN ADULT. FIRST AID PROC:SUS
(100F), RISK OF ASPIR INTO LUNGS IS REMOTE, BUT CUFFED TUBE LAVAGE IS STILL
REC FOR L G QTYS. ASPIRATED MATL MAY CAUSE CHEM PNEUM/LIPOID PNEUM.
SUBCUTANEOUS/INTRAMUSCULAR INJECTION REQS PROMPT
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: WIDE RANGE
Vapor Pres: SUPP DATA
Vapor Density: 14
Spec Gravity: 0.87 (H*2O=1)
Evaporation Rate & Reference: SUPP DATA
Solubility in Water: NEGLIGIBLE
Appearance and Odor: LIGHT AMBER LIQUID; LITTLE ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE.
Materials To Avoid: STRONG OXIDANTS.
Hazardous Decomposition Products: CO, CO*2.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: FLUSHING OIL, 93060
Company: HYVAC PRODUCTS INC
PO Box: 389
City: PHOENIXVILLE PA
Zipcode: 19401-0389
Health Emergency Phone: 215-278-0355
Label Required IND: Y
Date Of Label Review: 10/17/1996
Status Code: C
Label Date: 10/17/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE:INHALATION:LOW RISK OF INHALATION. IN ENCLOSED
SPACES OR WHEN HOT, VAPORS MAY REACH CONCENTRATIONS SUFFICIENT TO CAUSE
DROWSINESS, DIZZINESS, HEADACHE, NAUSEA OR LUNG IRRITATION. MISTS ABOVE TLV
MAY CAUSE CHEMICAL PNEUMONITIS. SKIN CONTACT:TRANSIENT, SLIGHT IRRITATION.
EYE CONTACT:MAY BE MILDLY IRRITATING. INGESTION:GENERALLY LOW TOXICITY. VERY
LARGE AMOUNTS MAY CAUSE GENERALIZED DEPRESSION, HEADACHE, DROWSINESS,
NAUSEA, VOMITING OR DIARRHEA. CHRONIC:PROLONGED SKIN CONTACT MAY CAUSE
DRYING, CRACKING OR FOLLICULITIS. REPEATED MIST OR FUME EXPOSURE MAY INDUCE
PULMONARY IRRITATION OR CHRONI C BRONCHITIS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
P/N 522894, BATTERY
| |
|
A-2 EPOXY ADHESIVE RESIN, PART A
| |
|
NAPA QUALITY TRACTOR HYDRAULIC FLUID
| |
|
MOBIL DTE 15M
| |
|
DIMPLE GREEN (INDUSTRIAL CLEANER/DEGREASER)
| 111-76-2 |
|
T-6230 TONER FOR M6230
| 27136-15-8
25869-00-5
1333-86-4 |
|
3M BRAND BATHROOM CLEANER CONCENTRATE
| 2687-94-7
79-14-1
7732-18-5
6915-15-7
68424-95-3
64-17-5 |
|
BOROTHENE SOLVENT
| |
|
PARABOND M-251
| |
|
ETCH-KLENZ, 0011
| |
|
5235 FLUX REMOVER
| 67-63-0
71-55-6 |
|
ENVIROTEX LITE RESIN, 2006
| |
|
ENVIROTEX LITE HARDENER, 2006
| |
|
POTASSIUM REAGENT C, 5162
| 7732-18-5
64-17-5
67-56-1
493-52-7 |
|
KEROSENE 1-K
| 64742-81-0
7704-34-9 |
|
KWIK SEAL TUB & TILE CAULK, 10009
| |
|
HYDROLASTIC FINISH COATING (078 LINE) 078193
| |
|
CCX-77, 0289
| |
|
EA 50
| 1343-93-7
64-19-7
67-56-1
107-21-1
548-26-5
5141-20-8 |
|
UNITED 174
| 76-13-1
75-45-6 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2E
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2D
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2B
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
ST-21, POLY SPRAY JET
| 111-76-2
67-63-0
9016-45-9 |
|
CUT-THRU, 1740
| |
|
POLYDIMETHYLSILOXANE, RTV700
| |
|
ESSENTIALUBE, 01-0
| |
|
FLUSHING OIL, 93060
| 64741-88-4 |
|
CHEMLOK AP-131
| 64-17-5
108-88-3
67-56-1
71-36-3
111-76-2 |
|
POLYOL/FLUOROPOLYMER, DSX-EXTRA
| |
|
80697, SPRAY-A-GASKET COPPER HIGH TEMP ADH (SUPDAT)
| |
|
WALLBOARD JOINT COMPOUND RTU, 70288
| |
|
CHAINMATE LUBRICANT, 02416
| 107-83-5
67-63-0
110-54-3
64742-01-4
1317-33-5
68476-85-7 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-M
| 67-64-1
7732-18-5 |
|
PRECISION CLEAN, 02728
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02701
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02705
| 6834-92-0
34590-94-8 |
|
WEAREX ADHESIVE HARDENER
| |
|
COLOR GUARD TOUGH RUBBER COATING-RED, 81807
| 78-93-3
64475-85-0
66070-58-4
110-54-3
108-88-3 |
|
FERROZINE IRON REAGENT, 2301
| 5421-46-5
7732-18-5 |
|
5247 UP TIGHT AD (AERO)
| 68476-86-8
110-54-3
67-64-1 |
|
AQUA ZAR SATIN, 27
| 7732-18-5
872-50-4
57-55-6 |
|
CW WHITE
| |
|
NUTS N'BOLTS 427
| 80-15-9
114-83-0
110-16-7
81-07-2 |
|
DEEP ACTION
| 1330-72-7
68439-46-3
68-04-2
7732-18-5
61789-19-3 |
|
POLYLITE 33031-00
| |
|
CITRI-CON, 0395
| |
|
CITRI-CON, 0395
| |
|
HI-TEMP OIL 101
| 64742-01-4
64741-45-3
9003-28-5
8052-42-4 |
|
SCOTCHKOTE BRAND 206N (SLOW) FUSION BONDED (SUP DAT)
| 25068-38-6
10101-39-0
1317-70-0
461-58-5
12027-58-6
14483-19-3
1308-38-9 |
|
|