DAP INC -- KWIK SEAL TUB & TILE CAULK, 10009
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCNBS
MSDS NAME: KWIK SEAL TUB & TILE CAULK, 10009
Responsible Party
Name: DAP INC
Box: 277
City: DAYTON OH 45401-0277
Info Phone: 800-543-3840
Emergency Phone Number: 800-535-5053
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DAP INC.
Box: 277
City: DAYTON OH 45401-0277
Phone: 513-253-7154/800-543-3840
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: MAY IRRITATE EYES, SKIN, NOSE & UPPER
RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL/FATAL IF SWALLOWED. IF
INGESTED, MAY CAUSE VOMITING, DIARRHEA, & DEPRESSED RESPIRATION.
INHALATION MAY AFFEC T BRAIN/NERVOUS SYSTEM, CAUSING DIZZINESS,
HEADACHES/NAUSEA. INGESTION OF ETHYLENE GLYCOL CAN CAUSE (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: GI IRRIT, NAUSEA, VOMIT, DIARR
&, IF CONSUMED IN SUFFICIENT QUANTITIES DEATH. CHRONIC: REPORTS HAVE
ASSOC PERM BRAIN & NERV SYS DMG W/PRLNG & RPTD OCCUP OVEREXP TO
SOLVS. INGEST OF ETHYLENE GLYCOL IN EXCESS MAY LEAD TO RESP AND/OR CARDIAC
FAILURE AS WELL AS KIDNEY & LIVER DAMAGE.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: FLOOD WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15 MINUTES.
CONTACT MD. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR.
CONTACT MD IMMEDIATELY. INGESTION: DO NOT INDUCE VOMITI NG. CONTACT MD OR
REGIONAL POISON CONTROL CENTER IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: USE ABSORBENT MATERIAL OR SCRAPE UP DRIED MATERIAL
AND PLACE INTO CONTAINERS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF ACCORDING TO FEDERAL, STATE, AND LOCAL
REGULATIONS. DO NOT REUSE EMPTY CONTAINER.
Handling And Storage Precautions: STORE AWAY FROM CAUSTICS AND OXIDIZERS. KEEP
CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. KEEP OUT OF RECH OF CHILDREN.
Other Precautions: KEEP CONTAINERS FROM EXCESSIVE HEAT AND FREEZING.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING VAPORS MAY BE
HARMFUL OR FATAL.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >200F,>93C
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). USE WATER SPRAY TO COOL EXPOSED SURFACES.
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF 8-HOUR EXPOSURE LIMIT IS EXCEEDED FOR ANY COMPONENT,
USE A NIOSH APPROVED RESPIRATOR. CONSULT YOUR SAFETY EQUIPMENT SUPPLIER AND
THE OSHA REGULATION, 29 CFR 1910.134 FOR RESPIRATOR REQUIREMENTS.
Ventilation: PROVIDE SUFFICIENT MECH VENT (LOC/GEN EXHST) TO MAINTAIN EXPOS
BELOW PEL & TLV. VAPS ARE HEAVIER THAN AIR (SUP DAT)
Protective Gloves: SOLVENT IMPERVIOUS GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPRVD EMERGENCY EYEWASH & DELUGE SHOWER (FP
N). SOLVENT IMPERVIOUS APRON IF BODY CONT W/PROD MAY OCCUR. (SUP DAT)
Work Hygienic Practices: WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health: VENT: & WILL COLLECT IN LOW AREAS. CHECK
ALL LOW AREAS (BASEMENTS, SUMPS, ETC.) BEFORE ENTERING. OTHER PROT EQUIP:
BARRIER CREAMS MAY BE USED.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: 17 @ 20C
Vapor Density: >1
Spec Gravity: 1.5 (H*2O=1)
Evaporation Rate & Reference: 1.0 (H*2O=1)
Solubility in Water: PARTIAL
Appearance and Odor: OPAQUE PASTE, WITH MILD ODOR
Percent Volatiles by Volume: 38
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT.
Materials To Avoid: STRONG OXIDIZERS AND CAUSTICS.
Hazardous Decomposition Products: NORMAL COMBUSTION PRODUCTS, I.E., CO*X, NO*X.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: KWIK SEAL TUB & TILE CAULK, 10009
Company: DAP INC.
PO Box: 277
City: DAYTON OH
Zipcode: 45401-0277
Health Emergency Phone: 800-535-5053
Label Required IND: Y
Date Of Label Review: 10/08/1996
Status Code: C
Label Date: 10/08/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: MAY IRRITATE EYES, SKIN, NOSE & UPPER
RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL/FATAL IF SWALLOWED. IF
INGESTED, MAY CAUSE VOMITING, DIARRHEA, & DEPRESSED RESPIRATION.
INHALATION MAY AFFEC T BRAIN/NERVOUS SYSTEM, CAUSING DIZZINESS,
HEADACHES/NAUSEA. INGESTION OF ETHYLENE GLYCOL CAN CAUSE GI IRRITATION,
NAUSEA, VOMITING, DIARRHEA &, IF CONSUMED IN SUFFICIENT QUANTITIES,
DEATH. CHRONIC: R EPORTS HAVE ASSOCIATED PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE W/PROLONGED & REPEATED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS.
INGESTION OF ETHYLENE GLYCOL IN EXCESS MAY LEAD TO RESPIRATORY AND/CARDIAC
FAILURE AS WELL AS KIDNEY & LIVER DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
P/N 522894, BATTERY
| |
|
A-2 EPOXY ADHESIVE RESIN, PART A
| |
|
NAPA QUALITY TRACTOR HYDRAULIC FLUID
| |
|
MOBIL DTE 15M
| |
|
DIMPLE GREEN (INDUSTRIAL CLEANER/DEGREASER)
| 111-76-2 |
|
T-6230 TONER FOR M6230
| 27136-15-8
25869-00-5
1333-86-4 |
|
3M BRAND BATHROOM CLEANER CONCENTRATE
| 2687-94-7
79-14-1
7732-18-5
6915-15-7
68424-95-3
64-17-5 |
|
BOROTHENE SOLVENT
| |
|
PARABOND M-251
| |
|
ETCH-KLENZ, 0011
| |
|
5235 FLUX REMOVER
| 67-63-0
71-55-6 |
|
ENVIROTEX LITE RESIN, 2006
| |
|
ENVIROTEX LITE HARDENER, 2006
| |
|
POTASSIUM REAGENT C, 5162
| 7732-18-5
64-17-5
67-56-1
493-52-7 |
|
KEROSENE 1-K
| 64742-81-0
7704-34-9 |
|
KWIK SEAL TUB & TILE CAULK, 10009
| |
|
HYDROLASTIC FINISH COATING (078 LINE) 078193
| |
|
CCX-77, 0289
| |
|
EA 50
| 1343-93-7
64-19-7
67-56-1
107-21-1
548-26-5
5141-20-8 |
|
UNITED 174
| 76-13-1
75-45-6 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2E
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2D
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2B
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
ST-21, POLY SPRAY JET
| 111-76-2
67-63-0
9016-45-9 |
|
CUT-THRU, 1740
| |
|
POLYDIMETHYLSILOXANE, RTV700
| |
|
ESSENTIALUBE, 01-0
| |
|
FLUSHING OIL, 93060
| 64741-88-4 |
|
CHEMLOK AP-131
| 64-17-5
108-88-3
67-56-1
71-36-3
111-76-2 |
|
POLYOL/FLUOROPOLYMER, DSX-EXTRA
| |
|
80697, SPRAY-A-GASKET COPPER HIGH TEMP ADH (SUPDAT)
| |
|
WALLBOARD JOINT COMPOUND RTU, 70288
| |
|
CHAINMATE LUBRICANT, 02416
| 107-83-5
67-63-0
110-54-3
64742-01-4
1317-33-5
68476-85-7 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-M
| 67-64-1
7732-18-5 |
|
PRECISION CLEAN, 02728
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02701
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02705
| 6834-92-0
34590-94-8 |
|
WEAREX ADHESIVE HARDENER
| |
|
COLOR GUARD TOUGH RUBBER COATING-RED, 81807
| 78-93-3
64475-85-0
66070-58-4
110-54-3
108-88-3 |
|
FERROZINE IRON REAGENT, 2301
| 5421-46-5
7732-18-5 |
|
5247 UP TIGHT AD (AERO)
| 68476-86-8
110-54-3
67-64-1 |
|
AQUA ZAR SATIN, 27
| 7732-18-5
872-50-4
57-55-6 |
|
CW WHITE
| |
|
NUTS N'BOLTS 427
| 80-15-9
114-83-0
110-16-7
81-07-2 |
|
DEEP ACTION
| 1330-72-7
68439-46-3
68-04-2
7732-18-5
61789-19-3 |
|
POLYLITE 33031-00
| |
|
CITRI-CON, 0395
| |
|
CITRI-CON, 0395
| |
|
HI-TEMP OIL 101
| 64742-01-4
64741-45-3
9003-28-5
8052-42-4 |
|
SCOTCHKOTE BRAND 206N (SLOW) FUSION BONDED (SUP DAT)
| 25068-38-6
10101-39-0
1317-70-0
461-58-5
12027-58-6
14483-19-3
1308-38-9 |
|
|