REICHHOLD CHEMICALS INC -- POLYLITE 33031-00
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCNHG
MSDS NAME: POLYLITE 33031-00
Responsible Party
Name: REICHHOLD CHEMICALS INC
Box: 13582
City: RESEARCH TRIANGLE PARK NC 27709-3582
Info Phone: 919-990-7500
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: REICHHOLD CHEMICALS, INC.,
Box: 13852
City: REASARCH TRIANGLE PARK NC 27709
Phone: 800-275-6353
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 2
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: SKIN: PRLNGD OR FREQUENT CONTACT MAY CAUSE DEFATTING &
DRYNESS OF THE SKIN W/RESULTANT IRRITATION & POSS DERMATITIS. SYTRENE MAY
BE ABSORBED THRU THE SKIN IN TOXIC AMOUNTS. EYES: MAY CAUSE IRRITATION.
LIQUID SPLASHES MAY RESULT IN MORE SERIOUS INJURIES. MAY CAUSE LACHRYMATION
(TEARS). INHAL: VAPS MAY (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: SEE "LR" VERSION, ING 3, FOR ADDITIONAL
INFORMATION (FP N).
Signs And Symptions Of Overexposure: HLTH HAZ: CAUSE MUCOUS MEMBRANE IRRITATION
& UPPER RESPIRATORY TRACT DISCOMFORT. HIGH CONCS MAY RESULT IN HEADACHE,
NAUSEA, INSENSIBILITY & OTHER CENTRAL NERVOUS SYSTEM EFFECTS. RPTD EXPOS
TO HIGH CON CENTRATIONS MAY CAUSE LIVER & KIDNEY DAMAGE. INGEST: MAY
CAUSE GASTROINTESTINAL DISTURBANCES, PAIN & DISCOMFORT.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH COPIOUS AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. SEEK IMMEDIATE MEDICAL AID. INHALATION: REMOVE
VICTIM FROM EXPOSURE. IF VICTIM IS UNCONSCIOUS, ADMINI STER ARTIFICIAL
RESPIRATION AND/OR OXYGEN AS NEEDED. SEEK MEDICAL AID.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNIT. VENT AREA. ABSORB SPILL
W/ABSORB MATL SUCH AS SAWDUST, VERMICULITE OR SAND & PLACE IN CLSD CNTNR.
IF LG SPILL, DIKE AREA TO PVNT THIS MATL FROM ENTERING WATER SYS OR SEWER S.
THIS MATL CNTNS STYRENE MONOMER WHICH, (SUPDAT)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISP MUST BE I/A/W FED, STATE & LOC REGS (FP N).
THIS MATL HAS BEEN TESTED & FOUND TO HAVE A FLASH POINT BELOW 140F. IF
DISCARDED, THIS MATL & CNTNRS SHOULD BE TREATED AS HAZ WASTES BASED ON
CHARACTS OF IGNITABILITY AS DEFINED UNDER FED
Handling And Storage Precautions: AVOID STORAGE ABOVE 100F. AVOID PROLONGED OR
REPEATED SKIN CONTACT. AVOID INHALATION OF HEATED VAPORS OR SPRAY MISTS.
Other Precautions: AVOID IMPROPER ADDITION OF PROMOTER AND/OR CATALYST. A
PROMOTER AND CATALYST USED WITH THIS PRODUCT SHOULD ALWAYS BE MIXED
SEPARATELY WITH THE PRODUCT AND MUST NEVER BE MIXED TOGETHER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 89.0F,31.7C
Lower Limits: 1.1%
Extinguishing Media: WATER SPRAY, FOAM, DRY CHEMICAL, CARBON DIOXIDE OR ANY
CLASS BE EXTINGUISHING AGENT.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). EQUIPMENT SHOULD BE THOROUGHLY DECONTAMINATED AFTER USE.
Unusual Fire/Explosion Hazard: AT ELEVATED TEMPS, SUCH AS IN FIRE, POLYM MAY
TAKE PLACE. IF POLYM TAKES PLACE IN A CLSD CNTNR, THERE IS POSS OF VIOLENT
RUPTURE OF CNTNR. PROD VAPS (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF A TLV OR PEL LISTED IN INGREDIENT SECTION OF DATA
SHEET IS EXCEEDED, THEN SUITABLE NIOSH APPROVED RESPIRATORY PROTECTION MUST
BE WORN TO PREVENT OVEREXPOSURE.
Ventilation: GEN VENT IS REQD DURING NORM USE. LOC VENT MAY BE REQD DURING
CERTAIN OPERATIONS TO KEEP EXPOS LEVELS BELOW LISTED TLV.
Protective Gloves: APPROPRIATE IMPERVIOUS GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N). WEAR
PROTECTIVE CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). % VOLAT: 44-48 BY WT. EXPLO HAZ:MAY FORM EXPLO
MIX IN AIR. SPILL PROC: IF SPILLED/RELSD IN QTYS EQUAL TO/GREATER THAN RQ, IS
SUB JECT TO REPORTING REQS OF CERCLA &/OR SARA (40 CFR PARTS 302 &
355). RQ = 100 LBS. EYE PROT: & FULL LENGTH FSHLD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 295F,146C
Vapor Density: HVR/AIR
Spec Gravity: 1.07-1.13
Evaporation Rate & Reference: SLOWER/N-BUTYL ACETATE
Appearance and Odor: PINK OPAQUE LIQUID; PUNGENT ODOR.
Percent Volatiles by Volume: SUPDAT
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT AND DIRECT SUNLIGHT.
Materials To Avoid: STRONG ACIDS AND OXIDIZING AGENTS.
Hazardous Decomposition Products: HEATING OF THIS MATERIAL TO DECOMPOSITION MAY
CAUSE THE EMISSION OF IRRITATING, ACRID FUMES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: POLYLITE 33031-00
Assigned IND: Y
Company: REICHHOLD CHEMICALS, INC.,
PO Box: 13852
City: REASARCH TRIANGLE PARK NC
Zipcode: 27709
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 10/14/1996
Status Code: C
Label Date: 10/14/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: Severe
Reactivity Hazard: Slight
Hazard And Precautions: FLAMMABLE. MAY BE EXPLOSIVE. ACUTE: SKIN:DEFATTING AND
DRYNESS OF SKIN W/RESULTANT IRRITATION AND POSSIBLE DERMATITIS. STYRENE MAY
BE ABSORBED IN TOXIC AMOUNTS. EYES:MAY CAUSE IRRITATION, TEARING; LIQ UID
SPLASHES MAY CAUSE MORE SERIOUS INJURY. INHALATION: MAY CAUSE MUCOUS MEMBRANE
IRRITATION AND UPPER RESPIRATORY TRACT DISCOMFORT, HEADACHE, NAUSEA,
INSENSIBILITY AND OTHER CENTRAL NERVOUS SYSTEM EF FECTS. INGESTION: MAY CAUSE
GASTROINTESTINAL DISTURBANCES, PAIN AND DISCOMFORT.CHRONIC: CANCER HAZARD.
CONTAINS MATERIAL WHICH IS LISTED AS AN ANIMAL SKIN CARCINOGEN (FP N).
REPEATED EXPOSURE TO HIGH CONCENTRATIONS MAY CAUSE LIVER AND KIDNEY DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
P/N 522894, BATTERY
| |
|
A-2 EPOXY ADHESIVE RESIN, PART A
| |
|
NAPA QUALITY TRACTOR HYDRAULIC FLUID
| |
|
MOBIL DTE 15M
| |
|
DIMPLE GREEN (INDUSTRIAL CLEANER/DEGREASER)
| 111-76-2 |
|
T-6230 TONER FOR M6230
| 27136-15-8
25869-00-5
1333-86-4 |
|
3M BRAND BATHROOM CLEANER CONCENTRATE
| 2687-94-7
79-14-1
7732-18-5
6915-15-7
68424-95-3
64-17-5 |
|
BOROTHENE SOLVENT
| |
|
PARABOND M-251
| |
|
ETCH-KLENZ, 0011
| |
|
5235 FLUX REMOVER
| 67-63-0
71-55-6 |
|
ENVIROTEX LITE RESIN, 2006
| |
|
ENVIROTEX LITE HARDENER, 2006
| |
|
POTASSIUM REAGENT C, 5162
| 7732-18-5
64-17-5
67-56-1
493-52-7 |
|
KEROSENE 1-K
| 64742-81-0
7704-34-9 |
|
KWIK SEAL TUB & TILE CAULK, 10009
| |
|
HYDROLASTIC FINISH COATING (078 LINE) 078193
| |
|
CCX-77, 0289
| |
|
EA 50
| 1343-93-7
64-19-7
67-56-1
107-21-1
548-26-5
5141-20-8 |
|
UNITED 174
| 76-13-1
75-45-6 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2E
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2D
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2B
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
ST-21, POLY SPRAY JET
| 111-76-2
67-63-0
9016-45-9 |
|
CUT-THRU, 1740
| |
|
POLYDIMETHYLSILOXANE, RTV700
| |
|
ESSENTIALUBE, 01-0
| |
|
FLUSHING OIL, 93060
| 64741-88-4 |
|
CHEMLOK AP-131
| 64-17-5
108-88-3
67-56-1
71-36-3
111-76-2 |
|
POLYOL/FLUOROPOLYMER, DSX-EXTRA
| |
|
80697, SPRAY-A-GASKET COPPER HIGH TEMP ADH (SUPDAT)
| |
|
WALLBOARD JOINT COMPOUND RTU, 70288
| |
|
CHAINMATE LUBRICANT, 02416
| 107-83-5
67-63-0
110-54-3
64742-01-4
1317-33-5
68476-85-7 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-M
| 67-64-1
7732-18-5 |
|
PRECISION CLEAN, 02728
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02701
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02705
| 6834-92-0
34590-94-8 |
|
WEAREX ADHESIVE HARDENER
| |
|
COLOR GUARD TOUGH RUBBER COATING-RED, 81807
| 78-93-3
64475-85-0
66070-58-4
110-54-3
108-88-3 |
|
FERROZINE IRON REAGENT, 2301
| 5421-46-5
7732-18-5 |
|
5247 UP TIGHT AD (AERO)
| 68476-86-8
110-54-3
67-64-1 |
|
AQUA ZAR SATIN, 27
| 7732-18-5
872-50-4
57-55-6 |
|
CW WHITE
| |
|
NUTS N'BOLTS 427
| 80-15-9
114-83-0
110-16-7
81-07-2 |
|
DEEP ACTION
| 1330-72-7
68439-46-3
68-04-2
7732-18-5
61789-19-3 |
|
POLYLITE 33031-00
| |
|
CITRI-CON, 0395
| |
|
CITRI-CON, 0395
| |
|
HI-TEMP OIL 101
| 64742-01-4
64741-45-3
9003-28-5
8052-42-4 |
|
SCOTCHKOTE BRAND 206N (SLOW) FUSION BONDED (SUP DAT)
| 25068-38-6
10101-39-0
1317-70-0
461-58-5
12027-58-6
14483-19-3
1308-38-9 |
|
|