ENVIRONMENTAL TECHNOLOGY INC -- ENVIROTEX LITE HARDENER, 2006
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCMZZ
MSDS NAME: ENVIROTEX LITE HARDENER, 2006
Kit Part: Y
Responsible Party
Name: ENVIRONMENTAL TECHNOLOGY INC
Address: SOUTH BAY DEPOT RD
City: FIELDS LANDING CA 95537
Info Phone: 707-443-9323
Emergency Phone Number: 800-424-9300(CHEMTREC)
Preparer's Name: DAVE FONSEN
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ENVIRONMENTAL TECHNOLOGIES INC
Address: 300 SOUTH BAY DEPOT RD
City: FIELDS LANDING CA 95537
Phone: 707-443-9323
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NOT DETERMINED.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONTACT:BELIEVED TO BE EXTREMELY IRRITATING WITH
POSSIBLE PERMANENT INJURY. SKIN CONTACT:CORROSIVE. THIS PRODUCT IS EXPECTED
TO CAUSE SEVERE DAMAGE WITH BURNS AND BLISTERING. TOXIC EFFECTS EXPECTE D
FROM ABSORPTION. PROLONGED OR REPEATED EXPOSURE MAY CAUSE SENSITIZATION OR
OTHER ALLERGIC RESPONSE. (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:INHALATION:MAY CAUSE IRRITATION
OF UPPER RESPIRATORY TRACT. PROLONGED OR REPEATED EXPOSURE MAY CAUSE SKIN
SENSITIZATION OR OTHER ALLERGIC RESPONSE. INGESTION:LIQUID CAUSES SEVERE
DAMAGE TO MU COUS MEMBRANES IF SWALLOWED.
Medical Cond Aggravated By Exposure: PREEXISTING SKIN & EYE DISORDERS MAY
BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT. PREEXISTING SKIN/LUNG ALLERGIES
MAY INCREASE CHANCE OF DEVELOPING INCREASED ALLERGY SYMPS FROM EXPOSURE TO
THIS PRODUCT.
First Aid: EYES:FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS WHILE HOLDING
EYELIDS OPEN. GET IMMED MED ATTN. SKIN:IMMED FLUSH W/WATER FOR AT LST 15 MINS
WHILE REMOVING CONTAM CLTHG & SHOES. GET IMMED MED ATTN. DO NOT REUSE
CLTHG UNTIL CLEANED. CONTAM LEATHER ARTICLES, INCL SHOES, CANNOT BE DECONTAM
& SHOULD BE DESTROYED TO PVNT REUSE. INHAL:REMOVE VICTIM TO FRESH AIR
& PROVIDE OXYG IF BRTHG IS DFCLT. (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE CAUTIOUS
JUDGEMENT WHEN CLEANING UP LG SPILLS. LG SPILLS:WEAR NIOSH APPRVD RESP &
PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE TO DO SO. DIKE & CN
TN. REMOVE W/VACUUM TRUCKS/PUMP TO STOR/
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: IF THIS PROD BECOMES WASTE, IT WOULD NOT BE HAZ WASTE
BY RCRA CRITERIA (40 CFR 261). UNDER RCRA, IT IS RESPONSIBILITY OF USER OF
PRODS TO DETERMINE, AT TIME OF DISP, WHETHER PROD MEETS RCRA CRITERIA F OR
HAZ WASTE. THIS IS BECAUSE PROD USES,
Handling And Storage Precautions: STORE IN COOL, DRY PLACE. BRTHG OF VAPS MUST
BE AVOIDED. AVOID CONT W/SKIN & EYES. DANGER:CAUSES SEV EYE & SKIN
BURNS & MAY CAUSE BLINDNESS.
Other Precautions: CORROSIVE LIQ. AVOID PRLNG/RPTD CONT W/SKIN. SERIOUS INJURY
MAY RSLT IN ABSORBED THRU SKIN. SERIOUS INJURY MAY RESULT IF SWALLOWED. AVOID
BRTHG VAP/MIST. USE ONLY IN WELL-VENTED LOCATIONS. DO NOT TAKE INTERNALLY.
MIN FEASIBLE HNDLG
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: >200F,>93C
Extinguishing Media: USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE
(CO*2).
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIP
(FP N). TOXIC FUMES WILL BE EVOLVED WHEN THIS MATL IS INVOLVED IN FIRE. COOL
FIRE EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard: KEEP AWAY FROM OPEN FLAMES & HIGH
TEMPERATURES. CONTAINERS, EVEN THOSE THAT HAVE BEEN EMPTIED, CAN CONTAIN
HAZARDOUS PRODUCT RESIDUES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPRVD RESP PROT REQD IN ABSENCE OF PROPER
ENVIRON CONTROL. FOR EMERGENCIES, NIOSH APPRVD SCBA/FULL-FACE RESP IS REC.
USE NIOSH APPRVD RESP AS REQD TO PVNT OVEREXP. I/A/W 29 CFR 1910.134, EITHER
NIOSH APPRVD ATM-SUPPLY RESP/ (SUPDAT)
Ventilation: VENT MUST BE SUFFICIENT TO CONTROL VAPS. THIS MATL SHOULD BE
CONFINED AS FAR AS POSS W/IN SEALED/COVERED EQUIP
Protective Gloves: IMPERVIOUS GLOVES (NEOPRENE OR RUBBER).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N). WEAR CLEAN, BODY-COVERING CLTHG.
Work Hygienic Practices: WASH W/SOAP & WATER BEFORE EATING, DRINKING, SMOKING,
APPLYING COSMETICS/USING TOILET FACILITIES. LAUNDER CONTAM
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). MATLS TO AVOID:CNDTNS. RXN W/SOME EPOXY RESINS
MAY PRDCE CONSIDERABLE HEAT. RUN-A-WAY CURE RXNS MAY BE TOX. RESP PROT:AIR-P
URIFYING RESP FOR ORG VAPS. EYE PROT:& FULL LGTH FCSHLD (FP N). FIRST AID
PROC:IF PATIENT IS NOT BRTHG, APPLY
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >400F,>204C
Vapor Pres: <1
Spec Gravity: 0.972 (H*2O=1)
Solubility in Water: SLIGHTLY SOLUBLE
Appearance and Odor: CLEAR COLORLESS LIQUID; AMMONIA ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: PERIODS OF EXPOSURE TO HIGH TEMPERATURES SHOULD
BE MINIMIZED. WATER CONTAMINATION SHOULD BE AVOIDED.
Materials To Avoid: REACTS VIGOROUSLY W/STRONG OXIDIZING AGENTS, STRONG MINERAL
ACIDS & STRONG EPOXY RESINS UNDER UNCONTROLLED (SUPP DATA)
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE & AMMONIA MAY
BE FORMED DURING COMBUSTION OR ELEVATED (>500F) TEMPERATURE DEGRADATION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ENVIROTEX LITE HARDENER, 2006
Company: ENVIRONMENTAL TECHNOLOGIES INC
Street: 300 SOUTH BAY DEPOT RD
City: FIELDS LANDING CA
Zipcode: 95537
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 10/02/1996
Status Code: C
Label Date: 10/02/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: Slight
Hazard And Precautions: DECOMPOSITION PRODUCTS MAY BE IRRITATING OR TOXIC.
ACUTE:EYE CONTACT:BELIEVED TO BE EXTREMELY IRRITATING WITH POSSIBLE PERMANENT
INJURY. SKIN CONTACT:CORROSIVE. THIS PRODUCT IS EXPECTED TO CAUSE SEVER E
DAMAGE WITH BURNS AND BLISTERING. TOXIC EFFECTS EXPECTED FROM ABSORPTION.
PROLONGED OR REPEATED EXPOSURE MAY CAUSE SENSITIZATION OR OTHER ALLERGIC
RESPONSE. INHALATION:IRRITATION OF UPPER RESPIRATOR Y TRACT. SKIN
SENSITIZATION AND ALLERGIC RESPONSE. INGESTION:SEVERE DAMAGE TO MUCOUS
MEMBRANES. CHRONIC:SKIN SENSITIZATION AND ALLERGIC RESPONSE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
P/N 522894, BATTERY
| |
|
A-2 EPOXY ADHESIVE RESIN, PART A
| |
|
NAPA QUALITY TRACTOR HYDRAULIC FLUID
| |
|
MOBIL DTE 15M
| |
|
DIMPLE GREEN (INDUSTRIAL CLEANER/DEGREASER)
| 111-76-2 |
|
T-6230 TONER FOR M6230
| 27136-15-8
25869-00-5
1333-86-4 |
|
3M BRAND BATHROOM CLEANER CONCENTRATE
| 2687-94-7
79-14-1
7732-18-5
6915-15-7
68424-95-3
64-17-5 |
|
BOROTHENE SOLVENT
| |
|
PARABOND M-251
| |
|
ETCH-KLENZ, 0011
| |
|
5235 FLUX REMOVER
| 67-63-0
71-55-6 |
|
ENVIROTEX LITE RESIN, 2006
| |
|
ENVIROTEX LITE HARDENER, 2006
| |
|
POTASSIUM REAGENT C, 5162
| 7732-18-5
64-17-5
67-56-1
493-52-7 |
|
KEROSENE 1-K
| 64742-81-0
7704-34-9 |
|
KWIK SEAL TUB & TILE CAULK, 10009
| |
|
HYDROLASTIC FINISH COATING (078 LINE) 078193
| |
|
CCX-77, 0289
| |
|
EA 50
| 1343-93-7
64-19-7
67-56-1
107-21-1
548-26-5
5141-20-8 |
|
UNITED 174
| 76-13-1
75-45-6 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2E
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2D
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
PERMATEX FORM-A-GASKET NO 2 SEALANT, 2B
| 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5 |
|
ST-21, POLY SPRAY JET
| 111-76-2
67-63-0
9016-45-9 |
|
CUT-THRU, 1740
| |
|
POLYDIMETHYLSILOXANE, RTV700
| |
|
ESSENTIALUBE, 01-0
| |
|
FLUSHING OIL, 93060
| 64741-88-4 |
|
CHEMLOK AP-131
| 64-17-5
108-88-3
67-56-1
71-36-3
111-76-2 |
|
POLYOL/FLUOROPOLYMER, DSX-EXTRA
| |
|
80697, SPRAY-A-GASKET COPPER HIGH TEMP ADH (SUPDAT)
| |
|
WALLBOARD JOINT COMPOUND RTU, 70288
| |
|
CHAINMATE LUBRICANT, 02416
| 107-83-5
67-63-0
110-54-3
64742-01-4
1317-33-5
68476-85-7 |
|
DURO 1M SUPER GLUE ADHESIVE REMOVER, SGR-M
| 67-64-1
7732-18-5 |
|
PRECISION CLEAN, 02728
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02701
| 6834-92-0
34590-94-8 |
|
PRECISION CLEAN, 02705
| 6834-92-0
34590-94-8 |
|
WEAREX ADHESIVE HARDENER
| |
|
COLOR GUARD TOUGH RUBBER COATING-RED, 81807
| 78-93-3
64475-85-0
66070-58-4
110-54-3
108-88-3 |
|
FERROZINE IRON REAGENT, 2301
| 5421-46-5
7732-18-5 |
|
5247 UP TIGHT AD (AERO)
| 68476-86-8
110-54-3
67-64-1 |
|
AQUA ZAR SATIN, 27
| 7732-18-5
872-50-4
57-55-6 |
|
CW WHITE
| |
|
NUTS N'BOLTS 427
| 80-15-9
114-83-0
110-16-7
81-07-2 |
|
DEEP ACTION
| 1330-72-7
68439-46-3
68-04-2
7732-18-5
61789-19-3 |
|
POLYLITE 33031-00
| |
|
CITRI-CON, 0395
| |
|
CITRI-CON, 0395
| |
|
HI-TEMP OIL 101
| 64742-01-4
64741-45-3
9003-28-5
8052-42-4 |
|
SCOTCHKOTE BRAND 206N (SLOW) FUSION BONDED (SUP DAT)
| 25068-38-6
10101-39-0
1317-70-0
461-58-5
12027-58-6
14483-19-3
1308-38-9 |
|
|