ZEON CHEMICALS INC -- HYTEMP 4001
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDTLL
MSDS NAME: HYTEMP 4001
Responsible Party
Name: ZEON CHEMICALS INC
Address: 1701 GOLF RD SUITE 1012
City: ROLLING MEADOWS IL 60008
Info Phone: 800-735-3388
Emergency Phone Number: 708-437-9770
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ZEON CHEMICALS L.P.
Address: 4111 BELLS LANE
City: LOUISVILLE KY 40211
Phone: 800-735-3388/502-775-2000
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: AS SUPPLIED, PRODS ARE NOT EXPECTED TO PRESENT ANY ADVERSE
ACUTE/CHRONIC HLTH EFTS. CARE SHOULD BE TAKEN FOR COMPOUNDING OPERATIONS THAT
MAY GENERATE DUST; EXPOS MAY CAUSE SKIN & EYE IRRIT IN SAME MAN NER AS
NUISANCE DUST. DUST CAN CAUSE SHORTNESS OF BRTH, CHRONIC COUGH/UPPER RESP
TRACT IRRIT. NO (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:ADVERSE HLTH EFTS EXPECTED DURING
NORM PROCESS WHEN POTNTL EXPOS ARE ELIM BY GOOD INDUS HYGIENE PRACT &
WELL VENTD CNDTNS. AT PROCESS TEMPS, COMBINED INGREDS (ELASTOMER & OTHER
PROCESS INGRED S) MAY EMIT FUMES & VAPS THAT CAUSE RESP TRACT, EYES
&/OR SKIN IRRIT. TYPICALLY, EFTS ARE REVERSIBLE UPON REMOVAL
Medical Cond Aggravated By Exposure: NONE KNOWN FOR PRODUCT AS DELIVERED.
First Aid: INGEST:CALL MD IMMED(FP N). IF IRRIT OCCURS/PERSITS FROM ANY ROUTE
OF EXPOS, REMOVE FROM AREA. CALL MD. PROVIDE PROT BEFORE ALLOWING REENTRY.
EYES:TREAT AS ANY FOREIGN PARTICULATE MATTER. FLUSH W/RUNN ING WATER FOR
SEVERAL MIN WHILE HOLDINGLIDS OPEN. CONSULT MD IF IRRIT PERSISTS. SKIN:REMOVE
CONTAMD CLTHG. WASH SKIN W/SOAP & WATER. NO EFTS REQ FIRST AID ARE
EXPECTED. PARTICULATE INHAL:
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SWEEP, SHOVEL OR VACUUM CRUMBS OR CHUNKS INTO
CONTAINERS FOR REUSE OR DISPOSAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: LANDFILL OR INCINERATION IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS. THESE PRODUCTS ARE NOT DEFINED OR DESIGNATED AS
HAZARDOUS BY CURRENT PROVISIONS OF THE FEDERAL (EPA) RESOURCE CONSERVA TION
AND RECOVERY ACT (RCRA, 40 CFR 261).
Handling And Storage Precautions: DURING NORM PROCESSING, VIRTUALLY ALL
ELASTOMERS WILL EMIT FUMES & VAPS WHEN HEATED TO PROCESSING TEMPS. CONC
& COMPOSITION OF VAPS DEPEND ON
Other Precautions: STORE IN COOL, DRY PLACE AWAY FROM DIRECT LIGHT TO MAINTAIN
QUALITY. ABNORM CNDTNS IE, EQUIP MANFUNC/USING IMPROPER EQUIP/PROCS OR
HANGUP/STAGNATION OF MATL DURING PROCESSING MAY CAUSE DECOMP. PROVIDE
SUITABLE NIOSH APPRVD AIR-
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, ABC DRY CHEM/PROTEIN TYPE AIR FOAMS RECD.
ELASTOMERS CONSIDERED "ORDINARY COMBUSTS" (NFPA CLASS A). CO*2 (SUPDAT)
Fire Fighting Procedures: NIOSH APPRVD SCBA & FULL PROT EQUIP(FPN). PERS
NOT HAVING SUITABLE NIOSH APPRVD RESP PROT MUST LEAVE AREA TO PVNT
SIGNIFICANT EXPOS TO TOX COMBUST GASES(SUPDAT)
Unusual Fire/Explosion Hazard: MOST ORG SUBSTANCES WHEN IN FORM OF FINE
DUST/POWDER PRESENT DUST EXPLO HAZ. TAKE SPEC PRECS IF THESE ELASTOMERS ARE
GROUND/OTHERWISE FORMED INTO FINE POWDER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF OPERATIONS GENERATE DUST, WEAR NIOSH APPRVD RESP
SUITABLE FOR ANTIC AIRBORNE CONC. ABNORM CNDTNS MAY CAUSE DECOMP. IF GEN
DILUTION/LOC EXHST VENT IS NOT ADEQ TO AVOID EXPOS, USE NIOSH APPRVD AIR SU
PPLIED RESPS, SUCH AS POS PRESS SCBA.
Ventilation: ALWAYS USE EFTIVE GEN & IF NEC, LOC EXHST VENT TO PVNT ROUTINE
INHAL. VENT MUST BE ADEQ TO MAINTAIN AMBIENT
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: DO NOT STORE/CONSUME FOOD IN PROCESSING AREAS. DO NOT
USE PROCESSING EQUIP TO HEAT FOOD.
Supplemental Safety and Health: USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). SOL IN H*2O: SWELLS IN BOILING H*2O. % VOLAT:
<1 (WATER VAP)(WT). EXT MEDIA:IS GEN NOT RECD FOR USE ON CLASS A FIRES AS
LACK OF COOLING CAPACITY MAY RSLT IN REIGNIT. FIRE FIGHT PROC:FROM ANY
SOURCE. IN ENCLSD/POORLY VENTD AREAS, WEAR NIOSH
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.1 (H*2O=1)
Solubility in Water: SUPDAT
Appearance and Odor: WHITE TO PALE GREEN SLAB OR PARTICULATE WITH A MILD
CHARACTERISTIC ODOR.
Percent Volatiles by Volume: SUPDAT
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: OVERHEATING.
Materials To Avoid: NO SPECIFIC INFO AVAIL BUT STRONG OXIDIZERS OF REDUCING
AGENTS GEN NOT COMPAT W/MANY ORG CMPDS, ARE NOT COMPAT W/THESE.
Hazardous Decomposition Products: FUMES PRDCED WHEN HEATED TO DECOMP TEMPS MAY
CNTN:OXIDES OF CARBON & SM AMTS OF AROMATIC & ALIPHATIC HYDROCARBS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HYTEMP 4001
Company: ZEON CHEMICALS L.P.
Street: 4111 BELLS LANE
City: LOUISVILLE KY
Zipcode: 40211
Health Emergency Phone: 708-437-9770
Label Required IND: Y
Date Of Label Review: 05/14/1997
Status Code: C
Label Date: 05/14/1997
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: CARE SHOULD BE TAKEN FOR COMPOUNDING OPERATIONS
THAT MAY GENERATE DUST; EXPOSURE MAY CAUSE SKIN AND EYE IRRITATION IN SAME
MANNER AS NUISANCE DUST. DUST CAN CAUSE SHORTNESS OF BREATH, CHRONIC C OUGH
OR UPPER RESPIRATORY TRACT IRRITATION. NO ADVERSE EFFECTS EXPECTED DURING
NORMAL PROCESSING IN WELL VENTILATED CONDITIONS. AT PROCESSING TEMPERATURES,
FUMES MAY BE EMITTED CAUSING RESPIRATORY TRA CT IRRITATION AND EYE AND SKIN
IRRITATION. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.