| MSDS | : | Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI | | CAS | : | 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 | | NAME | : | ing 12: grind or expos such cntnrs to heat, flame, sparks/other sources
ing 13: residue is difficult to remove. "empty" drums should be
ing 14: reconditioner. all other cntnrs should be disp in an environ safe
ing 15: tanks refer to osha regs. ansi z49.1, & other govt &
ing 16: welding, or other contemplated operations.
resp prot: areas use niosh/msha approved airline-type resp/hoods. wear
ing 18: during & after applic unless air monitoring demonstrates
ing 19: follow respirator manufacturer's directions for respirator use.
butyl alcohol; (n-butyl alcohol). vp: 5.5 @ 20c.
acetic acid, butyl ester; (n-butyl acetate). vp: 8 @ 20c.
xylene (sara iii). vp: <10 @ 20c.
methyl isobutyl ketone (sara iii). vp: 18 @ 20c.
2-butanone; (methyl ethyl ketone). vp: 70 @ 20c.
4,4' isopropylidenediphenol-epichlorohydrin resin
titanium oxide; (titanium dioxide)
talc (powder), containing no asbestos
other prec: prlngd cont w/skin & brthg of vap/spray mist. exting
ing 9:proof equip. keep away from heat, sparks & open flame.do not
ing 10:i/a/w haz potentialities of curing agent when mixed therewith. see
ing 11: cntnrs retain residue (liq &/or vap) & can be dangerous.
|
| |
|
|
LENMAR INC -- Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BQVYL
MSDS NAME: Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI
Kit Part: Y
Responsible Party
Name: LENMAR INC
Address: 150 SOUTH CALVERTON RD
City: BALTIMORE MD 21223
Info Phone: 410-947-2300
Emergency Phone Number: 301-358-5524
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LENMAR, INC.
Address: 150 SOUTH CALVERTON ROAD
City: BALTIMORE MD 21223
Phone: 410-947-2300/410-358-5524
=======================================================
Ingredients
=======================================================
Name: ING 12: GRIND OR EXPOS SUCH CNTNRS TO HEAT, FLAME, SPARKS/OTHER SOURCES
OF IGNIT. DO NOT ATTEMPT TO CLEAN SINCE
-----------------------------
Name: ING 13: RESIDUE IS DIFFICULT TO REMOVE. "EMPTY" DRUMS SHOULD BE
COMPLETELY DRAINED, PROPERLY RETURNED TO DRUM
-----------------------------
Name: ING 14: RECONDITIONER. ALL OTHER CNTNRS SHOULD BE DISP IN AN ENVIRON SAFE
MANNER & I/A/W GOVT REGS.FOR WORK ON
-----------------------------
Name: ING 15: TANKS REFER TO OSHA REGS. ANSI Z49.1, & OTHER GOVT &
INDUS REFERENCE PERTAINING TO CLEANING, REPAIRING,
-----------------------------
Name: ING 16: WELDING, OR OTHER CONTEMPLATED OPERATIONS.
-----------------------------
Name: RESP PROT: AREAS USE NIOSH/MSHA APPROVED AIRLINE-TYPE RESP/HOODS. WEAR
PROPERLY FITTED, NIOSH/MSHA APPRVD RESP
-----------------------------
Name: ING 18: DURING & AFTER APPLIC UNLESS AIR MONITORING DEMONSTRATES
VAP/MIST LEVS ARE BELOW ACCEPTABLE LIMITS.
-----------------------------
Name: ING 19: FOLLOW RESPIRATOR MANUFACTURER'S DIRECTIONS FOR RESPIRATOR USE.
-----------------------------
Cas: 71-36-3
RTECS #: EO1400000
Name: BUTYL ALCOHOL; (N-BUTYL ALCOHOL). VP: 5.5 @ 20C.
% Wt: 15-25
OSHA PEL: 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 123-86-4
RTECS #: AF7350000
Name: ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE). VP: 8 @ 20C.
% Wt: 5-15
OSHA PEL: 150 PPM;200 PPM STEL
ACGIH TLV: 150 PPM;200 PPM STEL
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 1330-20-7
RTECS #: ZE2100000
Name: XYLENE (SARA III). VP: <10 @ 20C.
% Wt: 0-10
OSHA PEL: 50 PPM
ACGIH TLV: 50 PPM
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 108-10-1
RTECS #: SA9275000
Name: METHYL ISOBUTYL KETONE (SARA III). VP: 18 @ 20C.
% Wt: 0-10
OSHA PEL: 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 78-93-3
RTECS #: EL6475000
Name: 2-BUTANONE; (METHYL ETHYL KETONE). VP: 70 @ 20C.
% Wt: 0-10
OSHA PEL: 200 PPM;300 PPM STEL
ACGIH TLV: 200 PPM;300 PPM STEL
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Name: 4,4' ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN RESIN
% Wt: 20-30
-----------------------------
Cas: 13463-67-7
RTECS #: XR2275000
Name: TITANIUM OXIDE; (TITANIUM DIOXIDE)
% Wt: 20-30
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
------------------------------
Cas: 14807-96-6
RTECS #: WW2710000
Name: TALC (POWDER), CONTAINING NO ASBESTOS
% Wt: 4-14
OSHA PEL: 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
------------------------------
Name: OTHER PREC: PRLNGD CONT W/SKIN & BRTHG OF VAP/SPRAY MIST. EXTING
PILOT LIGHTS. USE NON-SPARKING TOOLS & EXPLO-
-----------------------------
Name: ING 9:PROOF EQUIP. KEEP AWAY FROM HEAT, SPARKS & OPEN FLAME.DO NOT
APPLY TO HOT SURFS.USE ONLY W/ADEQ VENT.HNDL
-----------------------------
Name: ING 10:I/A/W HAZ POTENTIALITIES OF CURING AGENT WHEN MIXED THEREWITH. SEE
MSDS Y-746 EPOXY CURING AGENT. "EMPTY"
-----------------------------
Name: ING 11: CNTNRS RETAIN RESIDUE (LIQ &/OR VAP) & CAN BE DANGEROUS.
DO NOT PRESS, CUT, WELD, BRAZE, SOLDER, DRILL,
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHALATION: ANESTHETIC. IRRITATION OF RESPIRATORY
TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION CHARACT BY HDCH, DIZZ, STAGGERING
GAIT, CONFUSN, UNCON/COMA. SKIN/EYE: PRIMARY IRRIT. REPORTS HAVE ASS OC RPTD
& PRLNGD OCCUP EXPOS TO SOLVS W/PERM BRAIN & NERV SYS DMG.
INTENTIONAL MISUSE BY DELIB CONC & (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: INHALING MATERIAL MAY BE HARMFUL
OR FATAL. EXPOSURE TITANIUM DIOXIDE DUST CAN CAUSE TEMPORARY DRYING EFFECT OR
IRRITATION OF MUCOUS MEMBRANES MAY RESULT FROM EXCESSIVE EXPOSURE. CHRONIC:
LON G TERM EXCESSIVE EXPOSURE MAY LEAD TO SEVERE AND PERMANENT DAMAGE TO
LUNG.
Medical Cond Aggravated By Exposure: NONE KNOWN.
First Aid: INHAL:REMOVE TO FRESH AIR. GIVE OXYGEN IF BRTHG IS DIFFICULT. CALL
PHYS. EYES: FLUSH IMMED WITH COPIOUS QTYS OF RUNNING WATER FOR AT LEAST 15
MINUTES. SEE PHYS FOR DEFINITIVE MED TREATMENT. SKIN: WASH AFFECTED AREAS
PROMPTLY WITH WATER. REMOVE CONTAMD CLTHG, & LAUNDER BEFORE REUSE.
CONSULT PHYS. INGEST: CALL PHYS/POIS CNTRL CNTR IMMED.IF CONSCIOUS GIVE 1 OR
2 GLASSES OF WATER. DO NOT INDUCE VOMIT.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL IGNIT SOURCES.MOP UP SPILLS OR ADD ABSORB.
USE NON-SPARKING TOOLS. USE ADEQ VENT. MOVE LEAKING CONTAINERS OUTDOORS,
OBSERVING PRECS WITH REGARD TO FIRE, SPARK AND FLAME HAZ. RUNOFF TO WATER WAY
CREATES FIRE HAZ; NOTIFY FIRE & HLTH AGENCIES.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: RECLAIM MATERIAL, INCINERATE, OR USE SANITARY LANDFILL
METHOD OF DISPOSAL, IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.
DO NOT INCINERATE CLOSED CONTAINERS. SEAL DRUMS TIGHTLY.
Handling And Storage Precautions: STORE IN WELL-VENTILATED WAREHOUSE. KEEP OUT
OF DIRECT SUNLIGHT OR OTHER HEAT SOURCE. KEEP CONTAINERS CLOSED. NO SMOKING.
Other Precautions: DO NOT TAKE INTERNALLY; HARMFUL/FATAL IF SWALLOWED. CNTNRS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQ IN EXCESS OF FEW
INCHES. CLOSE CNTNR AFTER EACH USE. DO NOT TRANSFER CONTENTS TO BOTT
LES/OTHER UNLBLD CNTNRS. AVOID
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 21F,-6.1C
Lower Limits: 1%
Extinguishing Media: FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER
FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP(FP
N).WATER MAY BE INEFT,HOWEVER, USE WATER SPRAY TO COOL FIRE-EXPOS CLSD CNTNRS
TO PVNT EXPLO.AVOID UNNEC(SUPDAT)
Unusual Fire/Explosion Hazard: TOX GASES ARE EVOLVED WHEN BURNING.KEEP CNTNRS
TIGHTLY CLSD.ISOLATE FROM HEAT,ELEC EQUIP,SPARKS,OPEN FLAME & AREAS WHERE
STATIC ELEC MAY BE GEN.CLSD (SUPP DATA)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OPEN AREAS USE APPRVD MECH FILTER RESP TO REMOVE
SOLID AIRBORNE PARTICLES DURING SPRAY APPLIC. IN RESTRICTED VENT AREAS USE
NIOSH/MSHA APPRVD CHEM/MECH FILTERS DESIGNED TO REMOVE COMBINATION OF PAR
TICULATES & VAP. IN CONFINED
Ventilation: USE APPRVD SPRAY BOOTH. PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL
& PATTERN TO KEEP CONC OF MOST HAZ ING BELOW TLV.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: NONE REQUIRED.
Work Hygienic Practices: NONE REQUIRED.
Supplemental Safety and Health: TRADE NAME/PART #:CORROSION INHIBITING, LEAD
& CHROMATE FREE--COMPONENT A.FIRE FIGHT PROC:EXPOS TO FUMES.ANY PERSON
EXPOS TO SUCH FUMES SHOULD RECEIVE IMMED MED ATTN.EXPLO HAZ:CNTNR MAY EXPLO
WHEN EXP OS TO EXTREME HEAT.WATER MAY BE USED TOCOOL CLSD CNTNRS.DO NOT APPLY
TO HOT SURFS.DO NOT STORE/MIX W/STRONG OXIDANTS.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >176F,>80C
Vapor Pres: SEE ING
Vapor Density: HVR/AIR
Evaporation Rate & Reference: SLOWER THAN ETHER
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume: 57
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: TEMPERATURES IN EXCESS OF 150F IN CLOSED
CONTAINER. EXPOSURE TO HEAT, SPARKS, OPEN FLAME AND HOT SURFACES.
Materials To Avoid: OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI
Company: LENMAR, INC.
Street: 150 SOUTH CALVERTON ROAD
City: BALTIMORE MD
Zipcode: 21223
Health Emergency Phone: 301-358-5524
Label Required IND: Y
Date Of Label Review: 12/16/1992
Status Code: C
Label Date: 12/16/1992
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: EXTREMELY FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, AND
FLAME. ACUTE: INHALATION CAN CAUSE IRRITATION OF THE RESPIRATORY TRACT,
HEADACHE, DIZZINESS, STAGGERING GAIT, CONFUSION. CAUSES PRIMARY EYE AND SK IN
IRRITATION. CHRONIC: MAY CAUSE PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|