ATLAS MINERALS & CHEMICALS INC -- CARBO VITROPLAST RESIN PART A, Z320103
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BQVTK
MSDS NAME: CARBO VITROPLAST RESIN PART A, Z320103
Kit Part: Y
Responsible Party
Name: ATLAS MINERALS & CHEMICALS INC
Address: FARMINGTON RD
Box: 0038
City: MERTZTOWN PA 19539-0038
Info Phone: 215-682-7171
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ATLAS MINERALS & CHEMICAL INC
Address: FARMINGTON ROAD
City: MERTZTOWN PA 19539-0038
Phone: 215-682-7171
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: EYE:CONTACT CAUSES IRRITATION. SKIN:REPEATED CONTACT
CAUSES IRRITATION, DEFATTING, DERMATITIS. INHAL:RESULTS IN IRRITATION TO THE
RESPIRATORY TRACT. CHRONIC:LIVER ABNORMALITIES, KIDNEY AND LUNG DAMAGE IN
LABORATORY ANIMALS. OVEREXPOSURE TOSTYRENE HAS APPARENTLY BEEN FOUND TO CAUSE
FOLLOWING EFFECTS IN(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: STYRENE:GROUP 2B (IARC), VOL 7, P.345, 1987.
(FP N)
Signs And Symptions Of Overexposure: HLTH HAZ:LABORATORY ANIMALS:LIVER
ABNORMALITIES, KIDNEY AND LUNG DAMAGE.
Medical Cond Aggravated By Exposure: RESPIRATORY PROBLEMS, ALLERGIES.
First Aid: EYE:FLUSH WITH CLEAR WATER FOR AT LEAST 15 MINUTES. GET MD.
SKIN:WASH CONTACT AREA WITH SOAP & WATER. IF SKIN IS RED, ITCHING, OR
BURNED, GET MD. INHAL:MOVE TO FRESH AIR. IF BREATHING STOPS GIVE ARTIF ICIAL
RESPIRATION. GET MD. INGEST:HAVE VICTIM DRINK LARGE VOLUMES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CALL MD IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ELIMINATE ALL SOURCES OF IGNITION, VENTILATE AREA.
ABSORB SPILLED MATERIAL WITH ABSORBENT AND PLACE IN APPROPRIATE CONTAINERS
FOR DISPOSAL. RESIDUAL RESINS CAN BE REMOVED W/METHYLENE CHLORIDE, ACETONE
OR AROMATIC SOLVS. WEAR EYE PROT, PROT(SUPP DATA)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL, STATE
AND FEDERAL ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: STORE AWAY FROM HEAT, SPARKS OR FLAMES.
PREFERRED STORAGE TEMPERATURES IS 50-6O F.
Other Precautions: AVOID BREATHING VAPORS. AVOID SKIN AND EYE CONTACT. DO NOT
TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY. KEEP OUT OF THE REACH OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 82.0F,27.8C
Lower Limits: 1.1%
Upper Limits: 6.1%
Extinguishing Media: DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP
(FP N). IF A LARGE AMOUNT IS INVOLVED, EVACUATE AREA & FIGHT FROM SAFE
DISTANCE. COOL SURROUNDING AREA W/WATER.
Unusual Fire/Explosion Hazard: IGNITES READILY AND BURNS VIGOROUSLY.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED ORGANIC VAPOR MASK IF TLV IS
EXCEEDED OR USED IN CONFINED AREAS.
Ventilation: LOCAL:PROVIDE VENTILATION ADEQUATE TO KEEP EXPOSURE BELOW TLV.
MECHANICAL:ACCEPTABLE.
Protective Gloves: PLASTIC OR RUBBER GLOVES.
Eye Protection: CHEM WORK GOG W/FULL LNGTH FSHLD (FP N).
Other Protective Equipment: SAFETY SHOWER, EYE BATH, CLEAN BODY COVER CLOTHES.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: SPILL PROC:CLOTHING AND RESPIRATORY PROTECTION
DURING CLEAN UP.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: ING 1
Vapor Pres: ING 1
Vapor Density: 3.6
Spec Gravity: 1.03
Evaporation Rate & Reference: SLOWER THAN BUTYL ACETATE
Solubility in Water: INSOLUBLE
Appearance and Odor: COLORED LIQUID WITH PUNGENT STYRENE ODOR
Percent Volatiles by Volume: 52.5
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: DIRECT SUNLIGHT, TEMPERATURES ABOVE 120F MAY
RESULT IN GRADUAL THICKENING AND GELATION.
Materials To Avoid: OXIDIZING MATERIALS, STRONG ACIDS, COPPER, AND COPPER
ALLOYS.
Hazardous Decomposition Products: ACRID FUMES, PHENOL DERIVATIVES, AND CARBON
MONOXIDES.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: TEMPERATURES ABOVE 150F, CONTACT WITH
OXIDIZING MATERIALS, HIGH TEMPERATURES.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: CARBO VITROPLAST RESIN PART A, Z320103
Company: ATLAS MINERALS & CHEMICAL INC
Street: FARMINGTON ROAD
City: MERTZTOWN PA
Zipcode: 19539-0038
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 12/14/1992
Status Code: C
Label Date: 12/14/1992
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Severe
Reactivity Hazard: Slight
Hazard And Precautions: EXTREMELY FLAMMABLE! KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAMES AND OXIDIZING AGENTS. HAZARDOUS POLYMERIZATION MAY OCCUR AT
TEMPERATURES ABOVE 150F. ACUTE:EYE/SKIN CONTACT CAUSES IRRITATION. INHALATION
CAUSES IRRITATION TO RESPIRAOTRY TRACT.CHRONIC: CANCER HAZARD: STYRENE IS
LISTED AS A CARCINOGEN (FP N). CHRONIC OVEREXPOSURE HAS CAUSED LIVER
ABNORMALITIES AND KIDNEY AND LUNG DAMAGE IN LAB ANIMALS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CHROMIUM TRIOXIDE TECHNICAL
| 1333-82-0 |
|
DURO WEATHERSTRIP CEMENT, DCD-19
| 8052-41-3 |
|
SILVER NITRATE, 0.0141N, 6346
| 7761-88-8
7732-18-5 |
|
PVC CLEAR PRIMER, UNI-WELD SERIES 9300
| 109-99-9
78-93-3
108-94-1 |
|
UNOCAL GUARDOL 30, 03650XX30
| |
|
ZINC REAGENT POWDER, 7393
| 1303-96-4
7647-14-5
135-52-4 |
|
HYDROCHLORIC ACID, 2.5N, 6251
| 7647-01-0 |
|
METALCLAD CERAMALLOY CP PLUS ACTIVATOR
| |
|
PRISM 454 SURFACE INSENSITIVE GEL INSTANT (
| 7085-85-0
9011-14-7
112945-52-5
123-31-9 |
|
RUST PENETRANT, 144469
| 107-21-1
1336-21-6
10024-97-2 |
|
TW-1087 THINNER
| 67-64-1 |
|
CEFBON-CMA, TKN-0480
| |
|
CORONA WIRE CLEANER 8-D5002-01, FG1-0301-00
| |
|
OLOA 9360 OMC CARBON GUARD, CC68529001
| |
|
PROPRIETARY CHEMICAL J, 1431
| |
|
TMSF 5000A PART A
| |
|
TMSFH 5000B PART B
| |
|
E-722 EPOXY PREPREG
| |
|
DPD COMPOUND FOR FREE AND TOTAL CHLORINE (S
| |
|
N-29 BLACK NEOPRENE: COLD BOND
| |
|
BUCKEYE #9, 24
| |
|
SOSURE 1,1,1-TRICHLOROETHANE
| 71-55-6
109-87-5
75-65-0 |
|
CARBO VITROPLAST RESIN PART A, Z320103
| |
|
CARBO VITROPLAST HARDENER PART B, Z320101
| |
|
CITRI-CON, 0395
| |
|
L.E.M.I. DEVELOPER,LIQUID TONER FOR MASTER(
| |
|
Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI
| 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 |
|
Y-745-MIL-P-530228 (ME) PRIMER, EPOXY COATI
| 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 |
|
KLYSTRON TUBE
| 7440-41-7 |
|
GENERAL PURPOSE CLEANER CONCENTRATE-AMMONIA
| 1336-21-6
7732-18-5
112-80-1
67-63-0
8002-09-3 |
|
PROPRIETARY CHEMICAL L 1686
| |
|
PROPRIETARY CHEMICAL L 1686
| |
|
UNITED 992 COLD TANK PARTS CLEANER AND (SUP
| 586-62-9
7705-14-8 |
|
51626A PRINT CARTRIDGES FOR DESKJET (PLAIN
| |
|
HYDRA-POINT COMP SOLUTION 5, 9774
| |
|
HYDRA-POINT COMP SOLUTION 2, 9773
| |
|
103 RESIN, 103A 5G 01 600A
| |
|
HAVALINE FORMULA 3 MOTOR OIL SAE 10W-30, 02
| |
|
DPD TABLET, 6904
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SCOTCHKOTE BRAND 206N FUSION BONDED EPOXY C
| 90-72-2
471-34-1
25068-38-6
10101-39-0
1317-70-0
12027-58-6
461-58-5
14483-19-3
1308-38-9 |
|
SCOTCHKOTE BRAND 312 LIQUID EPOXY COATING P
| 14807-96-6
711011-26-2
1308-38-9
25068-38-6 |
|
SCOTCHKOTE BRAND 312 LIQUID EPOXY COATING P
| 25154-52-3
100-37-8
13463-67-7
7173-62-8
111-40-0
68953-58-2
64-17-5 |
|
SCOTCHKOTE BRAND 213 FUSION BONDED EPOXY CO
| 25068-38-6
101-77-9
1317-70-0
1308-38-9
85-43-8 |
|
SCOTCHKOTE BRAND 215 FUSION BONDED EPOXY RE
| |
|
CITRI-CON, 0395
| |
|
JM-135 (400#), 4416
| |
|
|