FIBERCOTE INDUSTRIES INC -- E-722 EPOXY PREPREG
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BQVDY
MSDS NAME: E-722 EPOXY PREPREG
Responsible Party
Name: FIBERCOTE INDUSTRIES INC
Address: 172 EAST AURORA ST
City: WATERBURY CT 06725
Info Phone: 203-755-1344
Emergency Phone Number: 203-755-1344
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: FIBERCOTE INDUSTRIES INC
Address: 172 E AURORA ST
City: WATERBURY CT 06725
Phone: 203-755-1344
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: PROLONGED SKIN EXPOSURE CAN CAUSE MODERATE IRRITATION
&/OR DERMATITIS. EXCESSIVE INHALATION CAN CAUSE NASAL &/OR
RESPIRATORY IRRITATION, FATIGUE, WEAKNESS, CONFUSION, EUPHORIA, DIZZINESS
& HEADACHE. I NGESTION CAN CAUSE GI IRRITATION, NAUSEA, VOMITING &
DIARRHEA.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: PREEXISTING DERMAL, BRONCHIAL &
RESPIRATORY PROBLEMS.
First Aid: INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP)
(FP N). EYES:FLUSH W/WATER IMMEDIATELY FOR AT LEAST 15 MINUTES. CALL MD.
SKIN:WASH THOROUGHLY W/MILD SOAP & WATER. INGEST:INDUCE VOMIT ING. CALL
MD.
=======================================================
Handling and Disposal
=======================================================
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF I/A/W LOCAL, STATE & FEDERAL REGULATIONS
IN AN APPROVED LANDFILL.
Handling And Storage Precautions: KEEP SEALED TO AVOID ABSORPTION OF WATER FROM
HUMID AIR. KEEP AWAY FROM HEAT. STORE UNDER CONTROLLED LOW TEMPERATURE
CONDITIONS. STORE AT 0F, IF POSS.
Other Precautions: AFTER LOW TEMPERATURE STORAGE, ALLOW PACKAGE TO RETURN TO
ROOM TEMPERATURE BEFORE OPENING.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: -15F,-26C
Lower Limits: 2.6%
Upper Limits: 12.8%
Extinguishing Media: DRY CHEMICAL, WATER, FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION. NOT
APPLICABLE W/LOCAL EXHAUST.
Ventilation: LOCAL EXHAUST RECOMMENDED WHEN CURING. MECHANICAL (GENERAL)
VENTILATION RECOMMENDED.
Protective Gloves: RUBBER, VINYL/OTHER OSHA APPRVD GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices: WASH HANDS THOROUGHLY AFTER WORKING & BEFORE EATING OR
DRINKING.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Solubility in Water: INSOLUBLE
Appearance and Odor: NATURAL PRE-IMPREGNATED FIBERGLASS CLOTH HAVING MILD
NON-RESIDUAL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: ELEVATED TEMPERATURE WILL CURE.
Materials To Avoid: STRONG ACIDS, BASES & OXIDIZERS - WILL CURE.
Hazardous Decomposition Products: ALDEHYDES, PHENOLICS, CARBON MONOXIDE &/OR
DIOXIDES & OXIDES OF NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: UNCONTROLLED HEAT MAY CAUSE RUNAWAY
EXOTHERM.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: E-722 EPOXY PREPREG
Company: FIBERCOTE INDUSTRIES INC
Street: 172 E AURORA ST
City: WATERBURY CT
Zipcode: 06725
Health Emergency Phone: 203-755-1344
Label Required IND: Y
Date Of Label Review: 12/17/1992
Status Code: C
Label Date: 12/17/1992
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: KEEP SEALED TO AVOID ABSORPTION OF WATER FROM HUMID
AIR. KEEP AWAY FROM HEAT. STORE UNDER CONTROLLED LOW TEMPERATURE CONDITIONS.
STORE AT 0F, IF POSSIBLE. ACUTE:PROLONGED SKIN EXPOSURE CAN CAUSE MODER ATE
IRRITATION &/OR DERMATITIS. EXCESSIVE INHALATION CAN CAUSE NASAL &/OR
RESPIRATORY IRRITATION, FATIGUE, WEAKNESS, CONFUSION, EUPHORIA, DIZZINESS
& HEADACHE. INGESTION CAN CAUSE GI IRRITATION, NAUSE A, VOMITING &
DIARRHEA. CHRONIC:NONE LISTED BY MANFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CHROMIUM TRIOXIDE TECHNICAL
| 1333-82-0 |
|
DURO WEATHERSTRIP CEMENT, DCD-19
| 8052-41-3 |
|
SILVER NITRATE, 0.0141N, 6346
| 7761-88-8
7732-18-5 |
|
PVC CLEAR PRIMER, UNI-WELD SERIES 9300
| 109-99-9
78-93-3
108-94-1 |
|
UNOCAL GUARDOL 30, 03650XX30
| |
|
ZINC REAGENT POWDER, 7393
| 1303-96-4
7647-14-5
135-52-4 |
|
HYDROCHLORIC ACID, 2.5N, 6251
| 7647-01-0 |
|
METALCLAD CERAMALLOY CP PLUS ACTIVATOR
| |
|
PRISM 454 SURFACE INSENSITIVE GEL INSTANT (
| 7085-85-0
9011-14-7
112945-52-5
123-31-9 |
|
RUST PENETRANT, 144469
| 107-21-1
1336-21-6
10024-97-2 |
|
TW-1087 THINNER
| 67-64-1 |
|
CEFBON-CMA, TKN-0480
| |
|
CORONA WIRE CLEANER 8-D5002-01, FG1-0301-00
| |
|
OLOA 9360 OMC CARBON GUARD, CC68529001
| |
|
PROPRIETARY CHEMICAL J, 1431
| |
|
TMSF 5000A PART A
| |
|
TMSFH 5000B PART B
| |
|
E-722 EPOXY PREPREG
| |
|
DPD COMPOUND FOR FREE AND TOTAL CHLORINE (S
| |
|
N-29 BLACK NEOPRENE: COLD BOND
| |
|
BUCKEYE #9, 24
| |
|
SOSURE 1,1,1-TRICHLOROETHANE
| 71-55-6
109-87-5
75-65-0 |
|
CARBO VITROPLAST RESIN PART A, Z320103
| |
|
CARBO VITROPLAST HARDENER PART B, Z320101
| |
|
CITRI-CON, 0395
| |
|
L.E.M.I. DEVELOPER,LIQUID TONER FOR MASTER(
| |
|
Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI
| 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 |
|
Y-745-MIL-P-530228 (ME) PRIMER, EPOXY COATI
| 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 |
|
KLYSTRON TUBE
| 7440-41-7 |
|
GENERAL PURPOSE CLEANER CONCENTRATE-AMMONIA
| 1336-21-6
7732-18-5
112-80-1
67-63-0
8002-09-3 |
|
PROPRIETARY CHEMICAL L 1686
| |
|
PROPRIETARY CHEMICAL L 1686
| |
|
UNITED 992 COLD TANK PARTS CLEANER AND (SUP
| 586-62-9
7705-14-8 |
|
51626A PRINT CARTRIDGES FOR DESKJET (PLAIN
| |
|
HYDRA-POINT COMP SOLUTION 5, 9774
| |
|
HYDRA-POINT COMP SOLUTION 2, 9773
| |
|
103 RESIN, 103A 5G 01 600A
| |
|
HAVALINE FORMULA 3 MOTOR OIL SAE 10W-30, 02
| |
|
DPD TABLET, 6904
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SCOTCHKOTE BRAND 206N FUSION BONDED EPOXY C
| 90-72-2
471-34-1
25068-38-6
10101-39-0
1317-70-0
12027-58-6
461-58-5
14483-19-3
1308-38-9 |
|
SCOTCHKOTE BRAND 312 LIQUID EPOXY COATING P
| 14807-96-6
711011-26-2
1308-38-9
25068-38-6 |
|
SCOTCHKOTE BRAND 312 LIQUID EPOXY COATING P
| 25154-52-3
100-37-8
13463-67-7
7173-62-8
111-40-0
68953-58-2
64-17-5 |
|
SCOTCHKOTE BRAND 213 FUSION BONDED EPOXY CO
| 25068-38-6
101-77-9
1317-70-0
1308-38-9
85-43-8 |
|
SCOTCHKOTE BRAND 215 FUSION BONDED EPOXY RE
| |
|
CITRI-CON, 0395
| |
|
JM-135 (400#), 4416
| |
|
|