AIRTECH INTERNATIONAL INC -- TMSF 5000A PART A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BQVDT
MSDS NAME: TMSF 5000A PART A
Kit Part: Y
Responsible Party
Name: AIRTECH INTERNATIONAL INC
Address: 2542 EAST DEL AMO BLVD
City: CARSON CA 90749
Info Phone: 310-603-9683
Emergency Phone Number: 310-603-9683
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: AIRTECH INTERNATIONAL INC
Address: 2542 E. DEL AMO BLVD
City: CARSON CA 90749
Phone: 213-603-9683
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: NO
Effects of Exposure: ACUTE: BRIEF CONTACT MAY IRRITATE SKIN OR CAUSE RASH.
CHRONIC: REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN ALLERGIC
SENSITIZATION.
Explanation Of Carcinogenicity: CRYSTALLINE SILICA-QUARTZ:GROUP 2A,IARC
MONOGRAPHS VOL 7, P.341, 1987;ANTICIPATED TO BE CARCIN,NTP SIXTH (SEE OTHR
PREC)
Signs And Symptions Of Overexposure: SKIN RASH, IRRITATION.
Medical Cond Aggravated By Exposure: SKIN SENSITIZATION.
First Aid: SKIN: WASH THOROUGHLY WITH SOAP AND WATER. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION. EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. IF
IRRITATION PERSISTS, GET MEDICAL ATTENTION. INHALATION: REMO VE VICTIM TO
FRESH AIR. IF SYMPTOMS PERSIST, GET MEDICAL ATTENTION. INGESTION: DRINK
PLENTY OF WATER. GET MEDICAL ATTENTION IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY GLASSES.
SCRAPE-UP OR SHOVEL INTO DOT APPROVED WASTE CONTAINERS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: MATL,AS WASTE,IS NOT CONSIDERED RCRA HAZ WASTE.
HOWEVER,INCIN IN AN EPA-APPRVD WASTE INCIN IS PREF DISP PRACT.CHEM ADDNS,
PROCESSING/OTHERWISE ALTERING MATL MAY MAKE WASTE MANAGEMENT INFO HEREIN
INCOM PLETE, INACCURATE/OTHERWISE INAPPROPRIATE.(SUPDAT)
Handling And Storage Precautions: REFRIGERATED STORAGE IS RECOMMENDED TO
MAINTAIN PRODUCT QUALITY. PRODUCT MAY BE STORED AT ROOM TEMPERATURE (77F) FOR
UP TO 12 MONTHS.
Other Precautions: DO NOT CUT, GRIND, WELD OR DRILL ON OR NEAR THIS CONTAINER.
FOLLOW RECOMMENDED CURING SCHEDULE. EXPLAN OF CARCIN: ANNUAL REPORT ON
CARCINOGENS, 1991).
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: DRY CHEMICAL OF HALON FIRE EXTINGUISHER, OR WATER SPRAY,
FOAM, OR FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). CARTRIDGE RESPIRATORS DO NOT PROVIDE ADEQUATE PROT FOR FIRE
FIGHTERS OR EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard: MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: UNNECESSARY WITH ADEQUATE EXHAUST VENTILATION. WEAR
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN (FP N).
Ventilation: LOCAL EXHAUST VENTILATION AT POINT OF USE.
Protective Gloves: BUTYL RUBBER,PVC OR NITRILE RUBB GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: AN EYEWASH AND SAFETY SHOWER SHOULD BE NEARLY AND
READY FOR USE.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: CNDTNS TO AVOID (POLYM):ADHESIVE >75F UNLESS
CURING SURFS TO BE BONDED.FAILURE TO OBSERVE THESE PREC MAY RSLT IN EXCESSIVE
HEAT BUILD-UP CAUSING AN EXOTHERM. EXOTHERM HAS POTNTL FOR RELS OF TOX GASES.
WASTE DISP METH:ADDNLY,ST & LOC REQS FOR WASTE DISP MAY BE MORE
RESTRICTIVE OR OTHERWISE DIFFERENT FROM FED LAWS
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NIL
Vapor Density: NIL
Spec Gravity: 1.6
Solubility in Water: NEGLIGIBLE
Appearance and Odor: VISCOUS YELLOW LIQUID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CARBON MONOXIDE, OXIDES OF NITROGEN,
ALDEHYDES, ACIDS AND UNDETERMINED ORGANICS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: AVOID MIX RESIN (PART A) & CURING AGENT
(PART B) IN BATCHES >1 LB UNLESS YOU PLAN TO USE IMMED.DO NOT HEAT MIX
(SUPDAT)
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: TMSF 5000A PART A
Company: AIRTECH INTERNATIONAL INC
Street: 2542 E. DEL AMO BLVD
City: CARSON CA
Zipcode: 90749
Health Emergency Phone: 310-603-9683
Label Required IND: Y
Date Of Label Review: 12/16/1992
Status Code: C
Label Date: 12/16/1992
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: Slight
Hazard And Precautions: ACUTE: CAN CAUSE SKIN IRRITATION AND RASH. HEALTH
HAZARDS: NONE SPECIFIED BY MANUFACTURER. CHRONIC: CONTAINS MATERIAL WHICH IS
LISTED AS A CARCINOGEN (FP N). PROLONGED CONTACT MAY RESULT IN ALLERGIC S
ENSITIZATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CHROMIUM TRIOXIDE TECHNICAL
| 1333-82-0 |
|
DURO WEATHERSTRIP CEMENT, DCD-19
| 8052-41-3 |
|
SILVER NITRATE, 0.0141N, 6346
| 7761-88-8
7732-18-5 |
|
PVC CLEAR PRIMER, UNI-WELD SERIES 9300
| 109-99-9
78-93-3
108-94-1 |
|
UNOCAL GUARDOL 30, 03650XX30
| |
|
ZINC REAGENT POWDER, 7393
| 1303-96-4
7647-14-5
135-52-4 |
|
HYDROCHLORIC ACID, 2.5N, 6251
| 7647-01-0 |
|
METALCLAD CERAMALLOY CP PLUS ACTIVATOR
| |
|
PRISM 454 SURFACE INSENSITIVE GEL INSTANT (
| 7085-85-0
9011-14-7
112945-52-5
123-31-9 |
|
RUST PENETRANT, 144469
| 107-21-1
1336-21-6
10024-97-2 |
|
TW-1087 THINNER
| 67-64-1 |
|
CEFBON-CMA, TKN-0480
| |
|
CORONA WIRE CLEANER 8-D5002-01, FG1-0301-00
| |
|
OLOA 9360 OMC CARBON GUARD, CC68529001
| |
|
PROPRIETARY CHEMICAL J, 1431
| |
|
TMSF 5000A PART A
| |
|
TMSFH 5000B PART B
| |
|
E-722 EPOXY PREPREG
| |
|
DPD COMPOUND FOR FREE AND TOTAL CHLORINE (S
| |
|
N-29 BLACK NEOPRENE: COLD BOND
| |
|
BUCKEYE #9, 24
| |
|
SOSURE 1,1,1-TRICHLOROETHANE
| 71-55-6
109-87-5
75-65-0 |
|
CARBO VITROPLAST RESIN PART A, Z320103
| |
|
CARBO VITROPLAST HARDENER PART B, Z320101
| |
|
CITRI-CON, 0395
| |
|
L.E.M.I. DEVELOPER,LIQUID TONER FOR MASTER(
| |
|
Y-745 MIL-P-530228 (ME) PRIMER, EPOXY COATI
| 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 |
|
Y-745-MIL-P-530228 (ME) PRIMER, EPOXY COATI
| 71-36-3
123-86-4
1330-20-7
108-10-1
78-93-3
13463-67-7
14807-96-6 |
|
KLYSTRON TUBE
| 7440-41-7 |
|
GENERAL PURPOSE CLEANER CONCENTRATE-AMMONIA
| 1336-21-6
7732-18-5
112-80-1
67-63-0
8002-09-3 |
|
PROPRIETARY CHEMICAL L 1686
| |
|
PROPRIETARY CHEMICAL L 1686
| |
|
UNITED 992 COLD TANK PARTS CLEANER AND (SUP
| 586-62-9
7705-14-8 |
|
51626A PRINT CARTRIDGES FOR DESKJET (PLAIN
| |
|
HYDRA-POINT COMP SOLUTION 5, 9774
| |
|
HYDRA-POINT COMP SOLUTION 2, 9773
| |
|
103 RESIN, 103A 5G 01 600A
| |
|
HAVALINE FORMULA 3 MOTOR OIL SAE 10W-30, 02
| |
|
DPD TABLET, 6904
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SPRED ULTRA EXTERIOR GLOSS LATEX HOUSE AND
| |
|
SCOTCHKOTE BRAND 206N FUSION BONDED EPOXY C
| 90-72-2
471-34-1
25068-38-6
10101-39-0
1317-70-0
12027-58-6
461-58-5
14483-19-3
1308-38-9 |
|
SCOTCHKOTE BRAND 312 LIQUID EPOXY COATING P
| 14807-96-6
711011-26-2
1308-38-9
25068-38-6 |
|
SCOTCHKOTE BRAND 312 LIQUID EPOXY COATING P
| 25154-52-3
100-37-8
13463-67-7
7173-62-8
111-40-0
68953-58-2
64-17-5 |
|
SCOTCHKOTE BRAND 213 FUSION BONDED EPOXY CO
| 25068-38-6
101-77-9
1317-70-0
1308-38-9
85-43-8 |
|
SCOTCHKOTE BRAND 215 FUSION BONDED EPOXY RE
| |
|
CITRI-CON, 0395
| |
|
JM-135 (400#), 4416
| |
|
|