ENSIGN BICKFORD CO -- SX2, DEMEX 200, ECT, ROECT, LSCF, EXPLOSIVE (
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-328-4732
MSDS Num: CHXQT
MSDS NAME: SX2, DEMEX 200, ECT, ROECT, LSCF, EXPLOSIVE (SUPDAT)
Responsible Party
Name: ENSIGN BICKFORD CO
Address: HWY 175
Box: 160
City: GRAHAM KY 42344
Info Phone: 203-843-2276
Emergency Phone Number: 502-338-1988
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ENSIGN BICKFORD CO
Address: UNKNOWN
Box: UNKNOW
City: UNKNOWN NK 00000
Phone: UNKNOWN
Name: ENSIGN BICKFORD COMPANY
Address: 660 HOPMEADOW ST
Box: 160
City: SIMSBURY CT 06070
Phone: 203-658-4411
=======================================================
Item Description Information
=======================================================
Item Manager: B14
Item Name: CHARGE,DEMOLITION
Unit of Issue: FT
UI Container Qty: Z
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EXPLOSIVE: INGEST OF RDX HAS CAUSED EPLETIFORM
CONVULSIONS. EYE/SKIN CNTCT: CARE SHOULD BE TAKEN TO MINIMIZE CNTCT. INHAL:
PREVENT INHALATION OF PYROLYSIS FUMES. INGEST: CARE SHOULD BE TAKEN TO PVNT I
NGESTION. FOAM: CAN HAVE MINOR ABRASIVEEFT ON SKIN UNDER SOME CIRCUMSTANCES.
PARTICLES MAY CAUSE (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: PHYSICAL IRRIT OF EYES. NOTE:THE
"PLASTAZOTE" FOAM IS CHEMICALLY UNREACTIVE & BIOLOGICALLY INERT. EYE
CNTCT: PARTICLES MAY CAUSE PHYSICAL IRRIT OF EYES. SKIN CNTCT: FOAMS MAY HAVE
MINOR ABRA SIVE EFT ON SKIN UNDER SOME CIRCUMSTANCES. INHAL: NONE. INGEST:
INGESTION SHOULD BE AVOIDED, EVEN THOUGH MATL IS INERT.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) (FP N). EYES: WASH WITH WATER FOR AT LEAST 15
MINUTES. SKIN: WASH WITH WATER. INGEST: IF FOAM HAS BEEN IN CONTACT WIT H
EXPLOSIVE AND FOAM IS INGESTED, ADMINISTER EMETIC. SEEK MEDICAL HELP.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: MAY BE SWEPT UP WITH A NON-METALLIC IMPLEMENT.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE IN ACCORDANCE TO ALL LOCAL, STATE AND FEDERAL
REGULATIONS.
Handling And Storage Precautions: TRANSPORTATION MUST BE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. CLASS A HIGH EXPLOSIVES, DIVISION 1.1
D.
Other Precautions: THE MATERIAL CONTAINS A HIGH EXPLOSIVE, DANGEROUS SUBSTANCE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NONE
Lower Limits: NONE
Upper Limits: NONE
Extinguishing Media: WATER; BURNING MATERIAL MAY DETONATE UNDER SOME
CONDITIONS.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). EXPLOSION HAZARD EXISTS. EVACUATE ALL PERSONNEL TO A SAFE
PLACE. FIREMENT SHOULD NOT APPROACH FIRE.
Unusual Fire/Explosion Hazard: THIS MATERIAL MAY BE INITIATED BY IMPACT,
FRICTION AND ELECTROSTATIC DISCHARGE. PYROLYSIS FUMES MAY IGNITE AT 215C.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE. USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN (FP N).
Ventilation: NONE.
Protective Gloves: RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). MFR'S TRADE NAME/PART NO: CUTTING TAPE. CNDTNS
TO AVOID: EVOLVED FUMES MAY IGNITE. DO NOT SUBJECT MATERIAL TO SHEARING,
GRINDING OR IMPACT BETWEEN HARD SURFS. DETONATION MAY OCCUR.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: SEE ING 6
Spec Gravity: SEE INGS
Solubility in Water: NONE
Appearance and Odor: SEE INGREDIENT 1.
Percent Volatiles by Volume: INGS
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: THERMAL DEGRADATION OF FOAM OCCURS AT TEMPS
APPROACHING 199C. DECOMP OF EXPLOSIVE OCCURS AT ABOUT 300C & (SUPDAT)
Materials To Avoid: DO NOT STORE W/ACIDS, ALKALIES, REDUCING AGENTS, OXIDIZING
AGENTS, AMMONIA, AMINES, PHOSPHORUS & ORGANIC SOLVENTS.
Hazardous Decomposition Products: FUMES FROM BURNING ARE TOXIC. AVOID
INHALATION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SX2, DEMEX 200, ECT, ROECT, LSCF, EXPLOSIVE (SUPDAT)
Assigned IND: Y
Company: ENSIGN BICKFORD COMPANY
Street: 660 HOPMEADOW ST
PO Box: 160
City: SIMSBURY CT
Zipcode: 06070
Health Emergency Phone: 502-338-1988
Label Required IND: Y
Date Of Label Review: 10/14/1998
Status Code: C
Label Date: 10/14/1998
Origination
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Severe
Reactivity Hazard: Severe
Hazard And Precautions: CLASS A HIGH EXPLOSIVE - DIVISION 1.1 D. ACUTE:
EXPLOSIVE: INGESTION OF RDX HAS CAUSED EPLETIFORM CONVULSIONS. FOAM: CAN HAVE
MINOR ABRASIVE EFFECT ON SKIN UNDER SOME CIRCUMSTANCES. PARTICLES MAY CAUS E
PHYSICAL IRRITATION OF EYES. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.