3M GENERAL OFFICES -- SCOTCHKOTE BRAND 135 FUSION BONDED EPOXY CO
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BRDWQ
MSDS NAME: SCOTCHKOTE BRAND 135 FUSION BONDED EPOXY CO
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Cas: 13463-67-7
RTECS #: XR2275000
Name: TITANIUM OXIDE; (TITANIUM DIOXIDE)
% Wt: 2-4
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
------------------------------
Cas: 461-58-5
RTECS #: ME9950000
Name: GUANIDINE, CYANO; (DICYANDIAMIDE)
% Wt: 1-2
------------------------------
Cas: 7631-86-9
Name: AMORPHOUS SILICA
% Wt: 0.1-0.5
OSHA PEL: 6 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
------------------------------
Cas: 90-72-2
RTECS #: SN3500000
Name: PHENOL, 2,4,6-TRIS (DIMETHYLAMINOMETHYL)-
% Wt: 0.1-0.5
------------------------------
Cas: 1333-86-4
RTECS #: FF5800000
Name: CARBON BLACK. PERCENTAGE (WT): 0.050-0.100.
% Wt: SEE ING
OSHA PEL: 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
------------------------------
Cas: 25068-38-6
RTECS #: KC2100000
Name: BISPHENOL A-EPICHLOROHYDRIN COPOLYMER
% Wt: 60-65
------------------------------
Cas: 12001-26-2
RTECS #: VV8760000
Name: SILICATE, MICA; (MICA)
% Wt: 30-35
OSHA PEL: 20 MPPCF
ACGIH TLV: 3 MG/M3 RDUST; 9293
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE:PROD IS IRRIT TO EYES IF IT COMES INTO DIRECT CONT.
SKIN: PROD MAY IRRIT SKIN IF IT REMAINS IN DIRECT CONT FOR A PRLNGD PERIOD.
IT MAY CAUSE AN ALLERGIC SKIN SENSIT IN SUSCEPTIBLE INDIVS WHO ARE R
EPEATEDLY IN DIRECT CONT W/PRODUCT. INHALATION: BREATHING OF DUST & VAP
MAY BE IRRIT TO NOSE, THROAT & (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: RESP SYS. TITANIUM DIOXIDE HAS
BEEN SHOWN TO CAUSE BENIGN AND CANCEROUS LUNG TUMORS IN RATS EXPOS TO 250
MILLIGRAMS PER CUBIC METER OF AIR, 6 HRS A DAY, 5 DAYS A WEEK FOR 2 YRS.
INGEST: ALTH OUGH NOT A LIKELY ROUTE OF EXPOS, INGEST WOULD BE CONSIDERED
RELATIVELY HARMLESS FROM SINGLE INCIDENT OF INGESTION.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: PROVIDE FRESH
AIR; IF COUGHING, WHEEZING OR SHORTNESS OF BREATH OCCUR, CALL PHYSICIAN.
INGESTION: GIVE ONE/TWOGLASSES OF WATER. CALL PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: EXTING ALL IGNIT SOURCES. OBSERVE PREC IN OTHER SEC.
WETTING SPILLED POWDER CAN HELP REDUCE DUSTING PROBLEM. COLLECT SPILL BY
VACUUM/OTHER METH USING CARE TO AVOID DUSTING. PLACE IN COLLECTED MATL INT O
CLSD CNTNR. CAUTION: A VACUUM CLEANER(SUPDAT)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE OR BURY IN A SANITARY LANDFILL IN COMPLIANCE
WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Handling And Storage Precautions: DO NOT STORE PRODUCT >80F (>27C); IF
STORED ABOVE THAT TEMPERATURE, IT MAY BECOME UNUSABLE.
Other Precautions: AS W/ANY FINELY DIVIDED ORG MATL,DUST CLOUDS OF POWDER CAN
BE IGNITED BY OPEN FLAME/WEAK ELEC SPARKS. RESIN DUST COLLECTION EQUIP SHOULD
BE PROVIDED W/ADEQ EXPLO RELS.POSS SOURCES OF IGNIT SHOULD BE E LIM. TO AVOID
BUILDUP OF STATIC (SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: CARBON DIOXIDE, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: GUARD AGAINST DUST EXPLOSION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WHEN DUST AND/OR VAPOR IS PRESENT, USE OF RESPIRATORY
PROTECTION IS RECOMMENDED. WEAR A NIOSH/MSHA APPROVED DUST RESPIRATOR.
Ventilation: LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: PROTECTIVE CLOTHING IS RECOMMENDED.
Work Hygienic Practices: AVOID SKIN AND EYE CONTACT. LAUNDER CONTAMINATED
CLOTHING BEFORE WEARING AGAIN.
Supplemental Safety and Health: SPILL PROCEDURE: MAY BE SOURCE OF IGNITION.
OTHER PRECAUTIONS: ELECTRICITY, EQUIPMENT SHOULD BE GROUNDED. USE ONLY IN
WELL-VENTILATED AREAS WITH SUFFICIENT AIR MOVEMENT TO MAINTAIN AIRBORNE
CONCENTRAT IONS OF MATERIAL AT RECOGNIZED HEALTH AND SAFETY LEVELS. AVOID
BREATHING DUST AND VAPORS.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.51
Solubility in Water: NIL
Appearance and Odor: GRAY POWDER.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: NONE.
Hazardous Decomposition Products: MAY INCLUDE CARBON MONOXIDE, CARBON DIOXIDE
AND OXIDES OF NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCHKOTE BRAND 135 FUSION BONDED EPOXY CO
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 01/12/1993
Status Code: C
Label Date: 01/12/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: DIRECT EYE CONTACT CAN CAUSE IRRITATION. MAY
CAUSE SKIN IRRITATION. INHALATION OF DUST AND VAPORS MAY BE IRRITATING TO THE
NOSE, THROAT AND RESPIRATORY SYSTEM. CHRONIC: NONE SPECIFIED BY MANUFA
CTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.