| MSDS | : | SCOTCHKOTE BRAND 213 SPRAY. GRADE FUSION (S | | CAS | : | 25068-38-6
101-77-9
1317-70-0
1308-38-9
85-43-8 | | NAME | : | epichlorohydrin bis-phenol a; (bisphenol a epichlorohydrin copolymer)
aniline,4,4'-methylenedi-; (4,4'-methylenedianiline)
anatase; (anatase titanium dioxide)
chromium(iii) oxide (2:3)
4-cyelohexene-1,2-dicarboxylic anhydride; (tetrahydrophthalic anhydride)
supp data: can incl pain, vomit, abdom tenderness, naus, blood in
ing 6:symps can incl yellow skin, tenderness of abdomen, abdom
ing 7: efts: signs/symps can incl reduced urine vol, loss of appetite, wt
ing 8:urin and lethargy.
spill proc: wetting spilled powder can help reduce dusting problem.
vent: emissions below recom expos lim. if exhaust vent is not adeq, use
ing 11:should be ventilated to prevent vapors from entering the work
|
| |
|
|
3M GENERAL OFFICES -- SCOTCHKOTE BRAND 213 SPRAY. GRADE FUSION (S
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BRDWR
MSDS NAME: SCOTCHKOTE BRAND 213 SPRAY. GRADE FUSION (S
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: SL6475000
Name: EPICHLOROHYDRIN BIS-PHENOL A; (BISPHENOL A EPICHLOROHYDRIN COPOLYMER)
% Wt: 88-95
------------------------------
Cas: 101-77-9
RTECS #: BY5425000
Name: ANILINE,4,4'-METHYLENEDI-; (4,4'-METHYLENEDIANILINE)
% Wt: 1-3
OSHA PEL: 0.1 PPM, S
ACGIH TLV: 0.1 PPM, S
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 1317-70-0
RTECS #: BV6550000
Name: ANATASE; (ANATASE TITANIUM DIOXIDE)
% Wt: 1-3
OSHA PEL: 10 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
------------------------------
Cas: 1308-38-9
RTECS #: GB6475000
Name: CHROMIUM(III) OXIDE (2:3)
% Wt: 0.5-1
OSHA PEL: 0.5 MG/M3 (CR)
ACGIH TLV: 0.5 MG/M3 (CR)
------------------------------
Cas: 85-43-8
RTECS #: GW5775000
Name: 4-CYELOHEXENE-1,2-DICARBOXYLIC ANHYDRIDE; (TETRAHYDROPHTHALIC ANHYDRIDE)
% Wt: 0.1-1
------------------------------
Name: SUPP DATA: CAN INCL PAIN, VOMIT, ABDOM TENDERNESS, NAUS, BLOOD IN
VOMITUS, & BLOOD IN FECES. LIVER EFTS: SIGNS/
-----------------------------
Name: ING 6:SYMPS CAN INCL YELLOW SKIN, TENDERNESS OF ABDOMEN, ABDOM
DISTENTION, LETHARGY, FEVER, & DEATH. KIDNEY
-----------------------------
Name: ING 7: EFTS: SIGNS/SYMPS CAN INCL REDUCED URINE VOL, LOSS OF APPETITE, WT
GAIN, RED URINE, BACK PAIN, PAINFUL
-----------------------------
Name: ING 8:URIN AND LETHARGY.
-----------------------------
Name: SPILL PROC: WETTING SPILLED POWDER CAN HELP REDUCE DUSTING PROBLEM.
-----------------------------
Name: VENT: EMISSIONS BELOW RECOM EXPOS LIM. IF EXHAUST VENT IS NOT ADEQ, USE
APPROP RESP PROT. COOL DOWN AREAS
-----------------------------
Name: ING 11:SHOULD BE VENTILATED TO PREVENT VAPORS FROM ENTERING THE WORK
AREA.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: NO
Effects of Exposure: ACUTE: EYE: MOD IRRIT: SIGNS/SYMPS CAN INCL RED, SWELL,
PAIN, TEAR, & HAZY VISION. SKIN: LIVER EFTS: SIGNS/SYMPS CAN INCL YELLOW
SKIN, TENDERNESS OF ABDOMEN, ABDOM DISTENSION, LETHARGY, FEVER, & DEATH .
MILD SKIN IRRIT (AFTER PRLNGD/RPTD CONT): SIGNS/SYMPS CAN INCL RED, SWELL,
& ITCH. MAY BE ABSORBED (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: 4,4'-METHYLENEDIANILINE: IARC GP2B(IARC MNGRPH
VOL7, P56, 1987), ANTIC TO BE A CARCIN (NTP 6TH ANN RPT, 1991 (FP N).
Signs And Symptions Of Overexposure: HLTH HAZ:THRU SKIN.PRLNGD/RPTD EXPOS MAY
CAUSE: ALLERGIC SKIN RXN: SIGNS/SYMPS CAN INCL RED, SWELL, BLISTER, &
ITCH. INHAL: IRRIT (UPPER RESP): SIGNS/SYMPS CAN INCL SORENESS OF NOSE &
THROAT, COUGH, & SNEEZING. PRLNGD/RPTD EXPOS MAY CAUSE:LIVER EFTS:
SIGNS/SYMPS CAN INCL YELLOW SKIN, TENDERNESS OF ABDOMEN, (SUPP DATA)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE: IMMED FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. GET IMMEDIATE MEDICAL ATTENTION. SKIN: FLUSH WITH LARGE AMOUNTS OF
WATER. IF IRRITATION PERSISTS, CALL A PHYSICIAN. WASH CONTAMINA TED CLOTHING
BEFORE REUSE. INHAL: PROVIDE FRESH AIR; IF COUGHING, WHEEZING OR SHORTNESS OF
BREATH OCCUR, CALL A PHYSICIAN. INGEST: DRINK 2 GLASSES OF WATER. CALL A
PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CALL (612)733-1110/(612)733-6100 FOR 24-HR SPILL
ASSIST. EXTING ALL IGNIT SOURCES. VACUUM TO AVOID DUSTING. CAUTION! A VACUUM
CLEANER COULD BE AN IGNIT SOURCE. PLACE IN AN APPRVD METAL CONTR & SEAL.
P OSS SOURCES OF IGNIT SHOULD BE ELIMINATED.
Waste Disposal Methods: INCINERATE IN AN INDUSTRIAL OR COMMERCIAL FACILITY.
DISPOSE OF WASTE PRODUCT IN A SANITARY LANDFILL. DISPOSE OF IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: STORE AT TEMPERATURES WHICH ARE BELOW
80F(26C).
Other Precautions: GROUND CONTAINERS SECURELY WHEN TRANSFERRING CONTENTS. WEAR
LOW STATIC OR PROPERLY GROUNDED SHOES. RESIN DUST COLLECTION EQUIPMENT SHOULD
BE PROVIDED W/ADEQ EXPLOSION RELEASE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: DUST CLOUDS OF THIS MATERIAL IN COMBINATION WITH
AN IGNITION SOURCE MAY BE EXPLOSIVE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: SELECT 1 OF THE FOLLOWING NIOSH/MSHA APPRVD RESP BASED
ON AIRBORNE CONC OF CONTAM & I/A/W OSHA REGS: HALF-MASK ORG VAP RESP
W/DUST/MIST PREFILTER, HALF-MASK HIGH-EFFICIENCY FILTER RESPIRATOR.
Ventilation: USE W/APPROP LOC EXHAUST VENT. PROVIDE APPROP LOC EXHAUST FOR HEAT
CURING. PROVIDE SUFFICIENT VENT TO MAINTAIN
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: FULL-BODY SUIT, BOOTIES, HEAD COVERING.
Work Hygienic Practices: DO NOT EAT, DRINK/SMOKE WHEN USING THIS PRODUCT. WASH
EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER.
Supplemental Safety and Health: MFR TRADE NAME/PART #: BONDED EPOXY COATING.
EFTS OF OVEREXP: ABDOM DISTENSION, LETHARGY, FEVER, & DEATH. KIDNEY EFTS:
SIGNS/SYMPS CAN INCL REDUCED URIN VOL, LOSS OF APPETITE, WT GAIN, RED URINE,
BACK PAIN, PAINFUL URIN & LETHARGY. INGEST: IS NOT LIKELY RTE OF EXPOS
TO PROD. IRRIT OF GI TISSUES: SIGNS/SYMPS
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.22
Solubility in Water: NIL
Appearance and Odor: GREEN POWDER
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE, OXIDES OF
NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCHKOTE BRAND 213 SPRAY. GRADE FUSION (S
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 01/08/1993
Status Code: C
Label Date: 01/08/1993
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: DUST CLOUDS OF THIS MATL IN COMBINATION WITH AN IGNIT
SOURCE MAY BE EXPLOSIVE. ACUTE: EYE CONT CAUSE MOD IRRIT. SKIN CONT CAUSES
MILD IRRIT. MAY BE ABSORBED THRU SKIN. INGEST CAUSES ABDOMINAL PAIN, VO
MITING, NAUSEA, & BLOOD IN VOMITUS & FECES. INHALATION CAUSES UPPER
RESPIRATORY IRRITATION. CHRONIC: CAMCER HAZ. 4, 4-METHYLENE DIANIDANE IS
LISTED AS CARCIN (FP N). SKIN CONTACT, INGEST OR INHAL CAN CAUSE LIVER
EFFECTS W/YELLOW SKIN, ABDOMINAL TENDERNESS/DISTENSION, LETHARGY, FEVER,
& DEATH. INGESTION OR INHALATION MAY CAUSE KIDNEY EFFECTS W/REDUCED URINE
VOLUME, LOSS OF APPETITE, WEIGHT GAIN, R ED URINE, BACK PAIN, PAINFUL URIN,
AND LETHARGY.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|