| MSDS | : | INTERSHIELD PRORECO 508, PRA560 | | CAS | : | 110-43-0
55636-48-1
59330-00-6 | | NAME | : | methyl n-amyl ketone
1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with
1,3-propanediol, 2,2-dimethyl-, polymer with
|
| |
|
|
INTERNATIONAL PAINT INC -- INTERSHIELD PRORECO 508, PRA560
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJPCL
MSDS NAME: INTERSHIELD PRORECO 508, PRA560
Responsible Party
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE
City: HOUSTON TX 77091
Info Phone: 713-684-1244
Emergency Phone Number: 800-854-6813
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTERNATIONAL PAINT INC. INTERNATIONAL
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Phone: 800-589-1267/800-854-6813
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 110-43-0
RTECS #: MJ5075000
Name: METHYL N-AMYL KETONE
% low Wt: 25.
% high Wt: 50.
OSHA PEL: 465 MG/M3;100 PPM
ACGIH TLV: 233 MG/M3;50 PPM
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 55636-48-1
Name: 1,3-PROPANEDIOL, 2-ETHYL-2-(HYDROXYMETHYL)-, POLYMER WITH
5-ISOCYANATO-1-(ISOCYANATOMETHYL)-1,3,3-TRIMETHYLCYCLOHEXANE AND 2-OXEPANONE;
(POLYURETHANE PREPOLYMER WITH ISOPHORONE DIISOCYANATE)
% low Wt: 25.
% high Wt: 50.
------------------------------
Cas: 59330-00-6
Name: 1,3-PROPANEDIOL, 2,2-DIMETHYL-, POLYMER WITH
1,1'-METHYLENEBIS.(.4-ISOCYANATOBENZENE.). AND 2-OXEPANONE; (POLYURETHANE
PREPOLYMER WITH METHYLENE BIS (4-CYCLOHEXYL ISOCYANATE)
% low Wt: 25.
% high Wt: 50.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS
SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES NOSE AND THROAT
IRRITATION. MAY CAUSE ALLERGIC RESPIRATORY REACTION. EYE CONTACT: CAUSES EYE
IRRITATION. SKIN CONTACT: CAUSES SKIN IRRITATION. CAN BE ABSORBED THROUGH THE
SKIN. MAY CAUSE ORGAN DAMAGE. MAY CAUSE ALLERGIC SKIN REACTION OR SKIN
SENSITIZATION. INGESTION: MAY BE FATAL IF SWAL LOWED AND MAY CAUSE ORGAN
DAMAGE. CONTAINS AN INGREDIENT LISTED AS KNOWN OR SUSPECTED CARCINOGEN?
NTP:NO;
OSHA: NO; IARC: NO.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: GENERAL: IN ALL CASES OF DOUBT OR WHEN SYMPTOMS PERSIST, SEEK MED
ATTN. NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. INHAL: REMOVE TO FRESH
AIR. IF DISCOMFORT IS PRESENT OR BREATHING IS ABSENT GET MED ATTN IMMED. EYE
CONTACT: FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15 MINUTES UNTIL
IRRITATION SUBSIDES. IF IRRITATION PERSISTS, GET MED ATTN. SKIN CONTACT:
FLUSH W/LARGE AMUONTS OF WATER. USE S OAP IF AVAILABLE. REMOVE SEVERELY
CONTAM CLTHG (INCLUDING SHOES) & WASH BEFORE REUSE. IF IRRITATION
PERSISTS, GET MED ATTN. INGEST: IF SWALLOWED, DO NOT INDUCE VOMITING. KEEP AT
REST. GET PROMPT MED A TTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE
COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL WITH AN INERT MATERIAL
(EG, DRY SAND OR EARTH), THEN PLACE IN A CHEMICAL WASTE CONTAINER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Handling And Storage Precautions: KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE AWAY FROM
INCOMPATIBLE MATERIALS (SEE STABILITY AND REACTIVITY SECTION). KEEP AWAY FROM
HEAT, SP ARKS AND FLAMES. PROTECT MATERIAL FROM DIRECT SUNLIGHT.
Other Precautions: GROUND AND BOND CONTAINERS WHEN TRANSFERRING MATERIALS.
EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. FOLLOW ALL MSDS/LABEL
WARNINGS, EVEN AFTER THE CONTAINER IS EMPTIED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =46.1C, 115.F
Lower Limits: 1.1%
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: OSHA CLASSIFICATION: COMBUSTIBLE LIQUID - CLASS
II. ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT & OPEN FLAME. CLSD
CNTNRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. IN ABSENCE OF ELECTRICITY,
WATER SPRAY (FOG NOZZ PREFERRED) MAY BE USED TO COOL CNTNRS. DECOMPOSITION
& COMBUSTION PRODUCTS MAY BE TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: INDIVIDUALS W/LUNG OR BRTHG PROBS OR PRIOR RXN TO
ISOCYANATES MUST NOT BE EXPOSED TO VAP/SPRAY MIST. DO NOT BREATHE VAP/SPRAY
MIST. WEAR APPROP, PROPERLY FITTED, NIOSH APPRVD RESP DURING & AFTER
APPLI CATN UNLESS AIR MONITORING DEMONSTRATES VAP/MIST LEVELS ARE BELOW
APPLIC LIMS. NIOSH APPRVD SUPPLIED AIR RESP (EITHER POSITIVE PRESS OR
CONTINUOUS (SUPDAT)
Ventilation: PROVIDE SUFFICIENT VENT, IN VOL & PATTERN TO: A)KEEP TLV OF
HAZ INGREDS BELOW LIMS SPECIFIED IN INGRED SECTION. B)REMOVE VOLATILES PRDCED
DURING CURE & (SUPDAT)
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH AND DELUGE SHOWER (FP N). AS
NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH PRODUCT.
Supplemental Safety and Health: RESP PROT: FLOW TYPE) IS REQD. FOLLOW MFR'S
DIRECTIONS FOR RESP USE & OBSERVE REQS SPECIFIED IN 29 CFR 1910.134.
VENT: DECOMP PRODS PRDCED DURING WELDING OR CUTTING ON SURFS COATED W/THIS
PROD.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =151.7C, 305.F
Vapor Density: HVR/AIR
Spec Gravity: 0.97
Evaporation Rate & Reference: SLOWER/ETHER
Appearance and Odor: LIQUID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON DIOXIDE AND CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
NOTICE: REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
INTENTION AL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS
MAY BE HARMFUL OR FATAL.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT (DEPARTMENT OF TRANSPORATION): PROPER SHIPPING NAME:
PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER: UN1263. PACKING GROUP:
PACKING GROUP III.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA TITLE III (SUPERFUND AMENDMENTS AND
REAUTHORIZATION ACT): NONE KNOWN.
Federal Regulatory Information: TSCA (TOXIC SUBSTANCE CONTROL ACT): COMPONENTS
OF THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY. CERCLA (COMPREHENSIVE
RESPONSE COMPENSATION AND LIABILITY ACT): WE RECOMMEND YOU CONTACT LOCAL
AUTHORIT IES TO DETERMINE IF THERE MAY BE OTHER LOCAL REPORTING REQUIREMENTS.
W CLASSIFICATION: CLASS B, DIVISION 3.
State Regulatory Information: CALIFORNIA PROPOSITION 65: NONE KNOWN UNLESS
SPECIFIED BELOW.
=======================================================
Other Information
=======================================================
Other Information: METHYL N-AMYL KETONE - THERE IS A RISK OF ABSORPTION THROUGH
UNBROKEN SKIN.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INTERSHIELD PRORECO 508, PRA560
Company: INTERNATIONAL PAINT INC. INTERNATIONAL
Street: 6001 ANTOINE DR
City: HOUSTON TX
Zipcode: 77091
Health Emergency Phone: 800-854-6813
Label Required IND: Y
Date Of Label Review: 10/06/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Moderate
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE! ACUTE:INHALATION: VAPOR HARMFUL. MAY
AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
CAUSES NOSE AND THROAT IRRITATION. EYE CONTACT: CAUSES EYE IRRITATION. SKI N
CONTACT: CAUSES SKIN IRRITATION. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE
ORGAN DAMAGE. INGESTION: MAY BE FATAL IF SWALLOWED AND MAY CAUSE ORGAN
DAMAGE. CHRONIC: SKIN: MAY CAUSE ALLERGIC SKIN RE ACTION OR SKIN
SENSITIZATION. INHALATION: MAY CAUSE ALLERGIC RESPIRATORY REACTION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
INTERSHIELD PRORECO NON, PRA461
| |
|
MIL-H-5606G HYDRAULIC FLUID
| |
|
IMPERIAL 2075TH (QUAL #634D346)
| |
|
34-SX-97 PAINT STRIPPER, 4479
| |
|
TAP WIZARD CUTTING/TAPPING FLUID, 3859
| |
|
599 INSTRUMENT LUBRICANT 1 GALLON
| |
|
599 INSTRUMENT LUBRICANT 5 GALLON
| |
|
FLUID FILM GEL WRO-EP
| |
|
599 INSTRUMENT LUBRICANT 15 GALLON
| |
|
599 INSTRUMENT LUBRICANT 30 GALLON
| |
|
TASK MASTER BULK, TM1G
| |
|
STEEL SHOT AND GRIT
| 7439-89-6
7439-96-5
7440-21-3
7440-44-0
7704-34-9
7723-14-0
7440-50-8
7440-47-3
7440-02-0 |
|
INTERSHIELD PRORECO 58, PRA050
| 110-43-0
101-68-8
27083-55-2
26447-40-5
9016-87-9 |
|
ICE MELT/ANTIFREEZE
| 57-55-6 |
|
PLASTIC, PP 13S10A
| 9010-79-1 |
|
MTS SOLUTION, G109
| |
|
RTV 5140 SILICONE POTTING COMPOUND, 18120
| 70131-67-8
67762-90-7
1185-55-3
67-56-1 |
|
KLEAN N PRIMER, 30566
| 67-64-1
75-28-5
149-57-5
22221-10-9
58823-74-8
7439-92-1
7440-02-0 |
|
477 FIRE RETARDANT EPOXY COMPONENT B
| |
|
POTASSIUM CHLORIDE, 0865
| |
|
AROMATIC 150 FLUID
| |
|
METALCLAD CERAMALLOY CL+[AC] ACTIVATOR
| |
|
CAP-STUN WEAPON SYSTEMS
| |
|
OVERKOTE E-100 VERTIC 212295
| |
|
OVERKOTE E-100 VERTIC 212101, 122201160
| |
|
E7018, E7018AC
| |
|
POTASSIUM CHLORIDE, 3619
| |
|
SODIUM CHLORIDE
| 7647-14-5 |
|
02816,LPS HIGH PURITY NOFLASH CLEANER
| 1717-00-6
67-63-0
124-38-9 |
|
POLYVINYL CHLORIDE
| 9002-86-2
117-81-7
75-01-4 |
|
N-6605 LSA HAZE GRAY ENAMEL
| |
|
COLOR GUARD TOUGH RUBBER COATING BLACK, 81812
| 64742-48-9
66070-58-4
110-54-3
108-88-3
78-93-3 |
|
HIGH SOLIDS MAX COR PRIMER, R4001
| 1330-20-7
64742-95-6
123-42-2
78-93-3
108-83-8
14807-96-6
7789-06-2 |
|
INTERSHIELD PRORECO, PRA150
| 25068-38-6
110-43-0
64539-51-1
25036-25-3
68609-97-2
9072-62-2
1309-37-1 |
|
INTERSHIELD PRORECO 159, PRA151
| |
|
ULANOGEL 23
| 7732-18-5
409-21-2
102-71-6 |
|
PROPANE
| |
|
INTERSHIELD PRORECO 508, PRA560
| 110-43-0
55636-48-1
59330-00-6 |
|
USCO/WH: 113R79, 5614, 5113/5114, COPY CARTRIDGE, (SUPDAT)
| |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
AROCLOR 1221 SOLUTION, PP-292
| 540-84-1
11104-28-2 |
|
HIT HY 150, PART A
| |
|
HIT HY 150, PART B
| 14808-60-7
7732-18-5
94-36-0
25265-71-8
7631-86-9
9002-88-4 |
|
POTASSIUM CHLORIDE, 6788
| |
|
POTASSIUM CHLORIDE, 6801
| |
|
960 ACRYLIC COVE BASE ADHESIVE
| |
|
ODC-FREE CLEANER & DEGREASER, 22355
| 64742-48-9
5989-27-5
124-38-9 |
|
FORMICA 100 SUPER +, F100
| |
|
POLYSPEC LUX 31
| |
|
ECA 2PA
| |
|
|