TECHNOLUBE PRODUCTS DIV (LUBRI -- MIL-H-5606G HYDRAULIC FLUID
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-082-7524
MSDS Num: CJNTJ
MSDS NAME: MIL-H-5606G HYDRAULIC FLUID
Responsible Party
Name: TECHNOLUBE PRODUCTS DIV (LUBRICATING SPECIALTY CO)
Address: 8015 PARAMOUNT BLVD
City: PICO RIVERA CA 90660
Info Phone: 562-928-3311
Emergency Phone Number: (800)424-9300
Resp. Party Other MSDS No.: A0600
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: HYDRAULIC FLUID,PETROLEUM BASE
Specification Number: MIL-H-5606
Unit of Issue: DR
Quantitative Expression: 00000000010GL
UI Container Qty: 0
Type of Container: DRUM
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: PRINCIPLE HAZARDS: PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE DERMATITIS. EYE-MAY CAUSE EYE IRRITATION IF SPLASHED INTO EYES.
SKIN-REPEATED OR PROLONGED CONTACT WITH SKIN MAY CAUSE IRRITATION WHICH MAY
LEAD TO VARIOUS SKIN DISORDERS. AVOID PROLONGED SKIN CONTACT.
INHALATION-INHALATION OF VAPOR OR OIL MIST FROM THIS PRODUCT MAY CAUSE MILD
IRRITATION OF THE RESPIRATORY SYSTEM. USE IN WELL VENTILAT ED AREAS.
ORAL-INGESTION MAY CAUSE NAUSEA, DIARRHEA AND STOMACH DISCOMFORT.
Explanation Of Carcinogenicity: THIS MATERIAL HAS NOT BEEN IDENTIFIED AS A
CARCINOGENIC BY NTP, IARC,OR OSHA.
Signs And Symptions Of Overexposure: SWALLOWINGMATERIAL MAY CAUSE IRRITATION OF
THE GASTROINTESTINAL LINING, NAUSEA, VOMITING, DIARRHEA, AND ABDOMINAL PAIN.
First Aid: ORAL-DO NOT INDUCE VOMITING. IF CONSCIOUS, GIVE 2 GLASSES OF WATER.
GET IMMEDIATE MEDICAL ATTENTION. EYE-FLUSH WITH WATER AT LEAST 15 MIN. GET
MEDICAL ATTENTION IF EYE IRRITATION DEVELOPS OR PERSISTS. SKIN-WASH
IMMEDIATELY WITH SOAP & WATER. REMOVE SOILED CLOTHING. GET MEDICAL
ATTENTION IF IRRITATION DEVELOPS. LAUNDER CONTAMINATED CLOTHING.
INHALATION-REMOVE EXPOSED PERSON TO FRESH AIR. IF BREATHIN G IS LABORED,
ADMINISTER OXYGEN & OBTAIN IMMEDIATE MEDICAL ATTENTION. IF IRRITATION
PERSISTS OR IF TOXIC SYMPTOMS ARE OBSERVED, GET MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: EVACUATE ALL NON-ESSENTIAL PERSONNEL. PERSONAL
PROTECTIVE EQUIPMENT MUST BE WORN. REMOVE SOURCES OF IGNITION. PREVENT ENTRY
INTO SEWERS AND WATERWAYS. CONTAIN RELEASE, PICK UP FREE LIQUID FOR RECYCLIN
G OR DISPOSAL. RESIDUAL LIQUID CAN BE ABSORBED WITH INERT MATERIAL. CHECK
DOT/CERCLA AND OTHER AGENCIES FOR REPORTING REQUIREMENTS. PREVENT
CONTAMINATION TO SOIL, WATERWAYS AND SEWER SYSTEMS.
Waste Disposal Methods: CONSULT FEDERAL, STATE,AND LOCAL REGULATIONS REGARDING
DISPOSAL METHODS. RECYCLE USED OIL. DO NOT CONTAMINATE USEDOIL WITH SOLVENTS
OR OTHER CHEMICALS.
Handling And Storage Precautions: STORE IN CLOSED CONTAINERS OF PROPER
CONSTRUCTION. STORE AWAY FROM IGNITION SOURCES AND IN AREAS OF GOOD
VENTILATION. EMPTY CONTAINERS RETAIN MATERIAL RESIDUE. DO NOT CUT,WELD,
BRAZE, SOLDER OR EXPOS E CONTAINER TO OTHER IGNITION SOURCES.
Other Precautions: AVOID PROLONGED SKIN CONTACT, BREATHING VAPORS, AND
CONTAMINATED CLOTHING. USE WITH ADEQUATE VENTILATION. WEAR RECOMMENDED
PROTECTIVE EQUIPMENT. PRACTICE GOOD PERSONAL HYGIENE AFTER HANDLING.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: >82.C, 179.6F
Flash Point Text: COMBUSTIBLE
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, OR FOAM. AVOID USING WATER.
Fire Fighting Procedures: RECOMMED SCBA. USE WATER ONLY FOR COOLING CONTAINER.
WATER MAY CAUSE SPLATTERING, OR TRANSPORT THE FLAME.
Unusual Fire/Explosion Hazard: CARBON MONOXIDE AND ASPHYXIANTS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC VAPOR
CARTRIDGE AND DUST/MIST CARTRIDGE IS RECOMMENDED EXPOSURE LIMIT IS EXCEEDED.
SELF-CONTAINED BREATHIN APPARATUS IS RECOMMENDED FOR CONFINED SPACE ENTRY.
Ventilation: USE IN AREAS OF ADEQUATE VENTILATION. USE MECHANICAL EXHAUST TO
CONTROL VAPORS OR MISTS.
Protective Gloves: USE NITRILE OR NEOPRENE GLOVES ARE RECOMMENDED.
Eye Protection: SAFETY GLASSES, GOGGLES, OR FACE SHIELD ARE RECOMMENDED.
Other Protective Equipment: LONG SLEEVE SHIRT AND APRON WHEN POTENTIAL FOR SKIN
CONTACT. WEAR NEOPRENE OR NITRILE RUBBER BOOTS WHEN NECESSARY TO AVOID
CONTAMINATING SHOES.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V4
Boiling Point: >175.C, 347.F
Vapor Pres: <0.01MMHG 20 C
Vapor Density: HIGHER/AIR
Spec Gravity: 0.868
PH: N/D
Evaporation Rate & Reference: LESS THAN ETHER
Solubility in Water: NEGLIGIBLE
Appearance and Odor: RED OILY LIQUID. ODOR PETROLEUM.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: MATERIAL IS NORMALLY STABLE AT AMBIENT
TEMPERATURE AND PRESSURE.
Materials To Avoid: OXIDIZING AGENTS. DO NOT HEAT ABOVE THE FLASH POINT.
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: ORAL TOXICITY-SWALLOWING MATERIAL MAY CAUSE
IRRITATION OF THE GASTROINTESTINAL LINING, NAUSEA, VOMITING, DIARRHEA, AND
ABDOMINAL PAIN. EYE IRRITATION-NOT EXPECTED TO CAUSE EYE IRRITATION. SKIN
IRRIT ATION-NOT EXPECTED TO BE A PRIMARY SKIN IRRITANT. PROLONGED OR
REPETATIVE CONTACT MAY CAUSE IRRITATION. CARCINOGENIC-HIS MATERIAL HAS NOT
BEEN IDENTIFIED AS A CARCINOGENIC BY NTP, IARC,OR OSHA.
=======================================================
Ecological Information
=======================================================
Ecological: THIS MATERIAL IS EXPECTED TO HAVE ADVERSE AFFECTS ON MARINE AND
PLANT LIFE. SPILLS MAY CONTAMINATE DRINKING WATER.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: SEE 49 CFR 171.8 THROUGH 178.510. DOT SHIPPING NAME:
OIL, N.O.S. DOT HAZARD CLASS: NOT REGULATED. UN/NA NUMBER: NA 1270. GUIDE
NUMBER: 27. *MATERIALS CLASSIFIED AS DOT COMBUSTIBLE LIQUIDS (FLASH POINT
>141 AND <200F) ARENOT REGULATED BY DOT IN CONTAINERS OF 110 GALLONS,
OR LESS FOR DOMESTIC SHIPMENTS.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA 313-SOME COMPONENTS ARE LISTED.
Federal Regulatory Information: TSCA-ALL COMPONENTS OF THIS MATERIAL ARE ON THE
TSCA INVENTORY. CERCLA-LISTED.
State Regulatory Information: NOT LISTED.
=======================================================
Other Information
=======================================================
Other Information: EXPOSURE LIMITS: TLV=5MG/M3 AS OIL MIST.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 148975
MSDS NAME: MIL-H-5606G HYDRAULIC FLUID
MSDS Prepared Date: 08/06/1998
Review Date: 10/04/1999
Net Unit Weight: 72.3 LBS
Multiple KIT Number: 0
Unit Of Issue: DR
Container QTY: 0
Type Of Container: DRUM
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MIL-H-5606G HYDRAULIC FLUID
Company: LUBRICATING SPECIALTIES CO. TECHNOLUBE PRODUCTS DIV
Street: 3365 E. SLAUSON AVE
City: LOS ANGELES CA
Zipcode: 90058
Health Emergency Phone: (800)424-9300
Label Required IND: Y
Date Of Label Review: 10/04/1999
Status Code: A
Year Procured: 1999
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: PRINCIPLE HAZARDS: PROLONGED OR REPEATED SKIN CONTACT
MAY CAUSE DERMATITIS. EYE-MAY CAUSE EYE IRRITATION IF SPLASHED INTO EYES.
SKIN-REPEATED OR PROLONGED CONTACT WITH SKIN MAY CAUSE IRRITATION WHICH MAY
LEAD TO VARIOUS SKIN DISORDERS. AVOID PROLONGED SKIN CONTACT.
INHALATION-INHALATION OF VAPOR OR OIL MIST FROM THIS PRODUCT MAY CAUSE MILD
IRRITATION OF THE RESPIRATORY SYSTEM. USE IN WELL VENTILAT ED AREAS.
ORAL-INGESTION MAY CAUSE NAUSEA, DIARRHEA AND STOMACH DISCOMFORT.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
INTERSHIELD PRORECO NON, PRA461
| |
|
MIL-H-5606G HYDRAULIC FLUID
| |
|
IMPERIAL 2075TH (QUAL #634D346)
| |
|
34-SX-97 PAINT STRIPPER, 4479
| |
|
TAP WIZARD CUTTING/TAPPING FLUID, 3859
| |
|
599 INSTRUMENT LUBRICANT 1 GALLON
| |
|
599 INSTRUMENT LUBRICANT 5 GALLON
| |
|
FLUID FILM GEL WRO-EP
| |
|
599 INSTRUMENT LUBRICANT 15 GALLON
| |
|
599 INSTRUMENT LUBRICANT 30 GALLON
| |
|
TASK MASTER BULK, TM1G
| |
|
STEEL SHOT AND GRIT
| 7439-89-6
7439-96-5
7440-21-3
7440-44-0
7704-34-9
7723-14-0
7440-50-8
7440-47-3
7440-02-0 |
|
INTERSHIELD PRORECO 58, PRA050
| 110-43-0
101-68-8
27083-55-2
26447-40-5
9016-87-9 |
|
ICE MELT/ANTIFREEZE
| 57-55-6 |
|
PLASTIC, PP 13S10A
| 9010-79-1 |
|
MTS SOLUTION, G109
| |
|
RTV 5140 SILICONE POTTING COMPOUND, 18120
| 70131-67-8
67762-90-7
1185-55-3
67-56-1 |
|
KLEAN N PRIMER, 30566
| 67-64-1
75-28-5
149-57-5
22221-10-9
58823-74-8
7439-92-1
7440-02-0 |
|
477 FIRE RETARDANT EPOXY COMPONENT B
| |
|
POTASSIUM CHLORIDE, 0865
| |
|
AROMATIC 150 FLUID
| |
|
METALCLAD CERAMALLOY CL+[AC] ACTIVATOR
| |
|
CAP-STUN WEAPON SYSTEMS
| |
|
OVERKOTE E-100 VERTIC 212295
| |
|
OVERKOTE E-100 VERTIC 212101, 122201160
| |
|
E7018, E7018AC
| |
|
POTASSIUM CHLORIDE, 3619
| |
|
SODIUM CHLORIDE
| 7647-14-5 |
|
02816,LPS HIGH PURITY NOFLASH CLEANER
| 1717-00-6
67-63-0
124-38-9 |
|
POLYVINYL CHLORIDE
| 9002-86-2
117-81-7
75-01-4 |
|
N-6605 LSA HAZE GRAY ENAMEL
| |
|
COLOR GUARD TOUGH RUBBER COATING BLACK, 81812
| 64742-48-9
66070-58-4
110-54-3
108-88-3
78-93-3 |
|
HIGH SOLIDS MAX COR PRIMER, R4001
| 1330-20-7
64742-95-6
123-42-2
78-93-3
108-83-8
14807-96-6
7789-06-2 |
|
INTERSHIELD PRORECO, PRA150
| 25068-38-6
110-43-0
64539-51-1
25036-25-3
68609-97-2
9072-62-2
1309-37-1 |
|
INTERSHIELD PRORECO 159, PRA151
| |
|
ULANOGEL 23
| 7732-18-5
409-21-2
102-71-6 |
|
PROPANE
| |
|
INTERSHIELD PRORECO 508, PRA560
| 110-43-0
55636-48-1
59330-00-6 |
|
USCO/WH: 113R79, 5614, 5113/5114, COPY CARTRIDGE, (SUPDAT)
| |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
AROCLOR 1221 SOLUTION, PP-292
| 540-84-1
11104-28-2 |
|
HIT HY 150, PART A
| |
|
HIT HY 150, PART B
| 14808-60-7
7732-18-5
94-36-0
25265-71-8
7631-86-9
9002-88-4 |
|
POTASSIUM CHLORIDE, 6788
| |
|
POTASSIUM CHLORIDE, 6801
| |
|
960 ACRYLIC COVE BASE ADHESIVE
| |
|
ODC-FREE CLEANER & DEGREASER, 22355
| 64742-48-9
5989-27-5
124-38-9 |
|
FORMICA 100 SUPER +, F100
| |
|
POLYSPEC LUX 31
| |
|
ECA 2PA
| |
|
|