HILTI INC -- HIT HY 150, PART B
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJPDD
MSDS NAME: HIT HY 150, PART B
Kit Part: Y
Responsible Party
Name: HILTI INC
Box: 21148
City: TULSA OK 74121
Info Phone: 800-879-6000
Emergency Phone Number: 800-879-4444
Resp. Party Other MSDS No.: 255; REVISION 004
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 14808-60-7
RTECS #: VV7330000
Name: SILICA, CRYSTALLINE-QUARTZ; (QUARTZ SAND)
Other REC Limits: N/K (FP N)
OSHA PEL: see Table Z-3
OSHA STEL: N/K (FP N)
ACGIH TLV: 0.1 MG/M3
ACGIH STEL: N/K (FP N)
------------------------------
Cas: 7732-18-5
RTECS #: ZC0110000
Name: WATER
Other REC Limits: N/K (FP N)
OSHA PEL: N/K (FP N)
OSHA STEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
ACGIH STEL: N/K (FP N)
------------------------------
Cas: 94-36-0
RTECS #: DM8575000
Name: BENZOYL PEROXIDE; (DIBENZOYL PEROXIDE)
% low Wt: 5.
% high Wt: 10.
Other REC Limits: N/K (FP N)
OSHA PEL: 5 MG/M3
OSHA STEL: N/K (FP N)
ACGIH TLV: 5 MG/M3
ACGIH STEL: N/K (FP N)
------------------------------
Cas: 25265-71-8
RTECS #: UB8765000
Name: DIPROPYLENE GLYCOL
Other REC Limits: N/K (FP N)
OSHA PEL: N/K (FP N)
OSHA STEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
ACGIH STEL: N/K (FP N)
------------------------------
Cas: 7631-86-9
RTECS #: VV7565000
Name: SILICA; (AMORPHOUS SILICA)
Other REC Limits: N/K (FP N)
OSHA PEL: 6 MG/M3
OSHA STEL: N/K (FP N)
ACGIH TLV: 10 MG/M3
ACGIH STEL: N/K (FP N)
------------------------------
Cas: 9002-88-4
RTECS #: KX3270000
Name: POLYETHYLENE
Other REC Limits: N/K (FP N)
OSHA PEL: N/K (FP N)
OSHA STEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
ACGIH STEL: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: NO
Effects of Exposure: KNOWN HAZARDS: EYE & SKIN IRRITATION. POSSIBLE
SENSITIZER. ACUTE: EYES: CAN CAUSE IRRITATION. SKIN: PROLONGED & REPEATED
CONTACT CAN CAUSE IRRITATION. AN ALLERGIC REACTION (E.G. RASH, ITCHING,
REDDENI NG) CAN OCCUR W/SOME INDIVIDUALS. INHALATION: POSSIBLE IRRITATION.
INGESTION: NONE EXPECTED. NOT CONSIDERED TO BE A ROUTE OF EXPOSURE. EFFECTS
OF INGESTION HAVE NOT BEEN DETERMINED. CARCINOGENICITY: I ARC CLASSIFIES
CRYSTALLINE SILICA (QUARTZ SAND) AS GROUP 1 CARCINOGEN BASED UPON EVIDENCE
AMONG WORKERS IN INDUSTRIES WHERE THERE HAS BEEN LONG-TERM & CHRONIC
EXPOSURE (VIA INHALATION) TO SILICA DUST, E.G. MINING, (EFFECTS OF
OVEREXPOSURE)
Explanation Of Carcinogenicity: SILICA, CRYSTALLINE-QUARTZ: IARC MONOGRAPHS,
SUPPLEMENT, VOLUME 68, PAGE 41, 1998:GROUP 1. NTP 8TH ANNUAL REPORT ON
CARCINOGENS, 1998: REASONABLY ANTICIPATED TO BE HUMAN CARCINOGEN. HUMAN:
LUNG.
Signs And Symptions Of Overexposure: HEALTH HAZARDS: QUARRY, STONE CRUSHING,
REFRACTORY BRICK AND POTTERY WORKERS. THIS PRODUCT DOES NOT POSE A DUST
HAZARD; THEREFORE, THIS CLASSIFICATION IS NOT RELEVANT.
Medical Cond Aggravated By Exposure: EYE, SKIN AND RESPIRATORY EXPECTED.
First Aid: EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. CALL A
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: MOVE VICTIM TO FRESH
AIR. CALL A PHYSICIAN IF SYMPTOMS PERSIST. INGESTION: SEEK MEDICAL
ATTENTION. DO NOT INDUCE VOMITING UNLESS DIRECTED TO BY A PHYSICIAN. NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. OTHER: REFERRAL TO A
PHYSICIAN IS RECOMMENDED IF THERE IS ANY QUESTI ON ABOUT THE SERIOUSNESS OF
THE INJURY/EXPOSURE.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: TAKE UP WITH AN ABSORBENT MATERIAL AND PLACE IN A
CONTAINER FOR PROPER DISPOSAL. NOT CONSIDERED A HAZARDOUS WASTE ACCORDING TO
EPA DEFINITIONS.
Waste Disposal Methods: CONSULT WITH REGULATORY AGENCIES OR CORPORATE PERSONNEL
FOR DISPOSAL METHODS THAT COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH AND
ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM
CHILDREN. STORE IN A COOL, DRY AREA. STORE BETWEEN 40F AND 80F. USE WITH
ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >93.3C, 200.F
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN. THERMAL DECOMPOSITION PRODUCTS CAN
BE PRODUCED UNDER FIRE CONDITIONS. SEE REACTIVITY SECTION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY REQUIRED. WHERE VENTILATION IS INADEQUATE
TO CONTROL VAPORS, USE A NIOSH-APPROVED RESPIRATOR WITH ORGANIC VAPOR
CARTRIDGES. NEVER ENTER A CONFINED SPACE WITHOUT AN APPROPRIATE NIOSH-APPR
OVED AIR SUPPLIED RESPIRATOR. IF DUSTS ARE GENERATED DURING DEMOLITION OR
REMOVAL, WEAR AN APPROPRIATE NIOSH-APPROVED DUST MASK OR RESPIRATOR.
Ventilation: GENERAL (I.E. NATURAL OR MECHANICALLY-INDUCED FRESH AIR
MOVEMENTS).
Protective Gloves: CLOTH OR IMPERVIOUS GLOVES (NEOPRENE OR RUBBER) RECOMMENDED.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
Work Hygienic Practices: PRACTICE GOOD HYGIENE, I.E. WASH AFTER USING AND
BEFORE EATING OR SMOKING.
Supplemental Safety and Health: PHYSICAL/CHEMICAL PROPERTIES: VOC CONTENT: 0
G/L.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =100.C, 212.F
Spec Gravity: 1.7
PH: 5
Solubility in Water: SOLUBLE
Appearance and Odor: GRAY PASTE, WITH ESTER-LIKE ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID TEMPERATURE EXTREMES WHICH COULD SHORTEN
THE SHELF-LIFE OF THIS PRODUCT, I.E. BELOW FREEZING AND ABOVE 100F. (SEE
HANDLING AND STORAGE SECTIONS.)
Materials To Avoid: STRONG ACIDS AND OXIDIZING AGENTS.
Hazardous Decomposition Products: THERMAL DECOMPOSITION CAN YIELD CARBON
MONOXIDE, CARBON DIOXIDE, NO*X, WATER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: BENZOYL PEROXIDE WILL DECOMPOSE AT
TEMPERATURES GREATER THAN 150F.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT SHIPPING NAME: NOT REGULATED.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA TITLE III, SECTION 313: THIS PRODUCT CONTAINS
5-10% BENZOYL PEROXIDE (CAS # 94-36-0) WHICH IS SUBJECT TO REPORTING UNDER
SECTION 313 OF SARA TITLE III (40 CFR PART 372).
Federal Regulatory Information: THIS MSDS HAS BEEN PREPATED IN ACCORDANCE WITH
THE FEDERAL OSHA HAZARD COMMUNICATION STANDARD. TSCA INVENTORY STATUS:
CHEMICAM COMPONENTS LISTED ON TSCA INVENTORY.
=======================================================
Other Information
=======================================================
Other Information: PRODUCT DESCRIPTION: METHACRYLATE RESINAND HARDENER. PART A
IS IN THE LARGE TUBE; PART B IS IN THE SMALL ONE. CODES: HEALTH: 1;
FLAMMABILITY: 1; REACTIVITY: 1; PERSONAL PROTECTIVE EQUIPMENT: B. H
EALTH/SAFETY CONTACTS: STEVE CERRARD (X6309); JERRY METCALF (X6704).
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HIT HY 150, PART B
Company: HILTI INC
Street: 5400 S 122ND E AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 800-879-4444
Label Required IND: Y
Date Of Label Review: 10/06/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: CAN CAUSE IRRIT. SKIN: PROLONGED &
REPEATED CONTACT CAN CAUSE IRRITATION. INHALATION: POSSIBLE IRRITATION.
CHRONIC: CANCER HAZARD. CONTAINS SILICA, CRYSTALLINE-QUARTZ WHICH IS LISTED
A S A HUMAN LUNG CARCINOGEN (FP N). SKIN: AN ALLERGIC REACTION (E.G. RASH,
ITCHING, REDDENING) CAN OCCUR W/SOME INDIVIDUALS. THIS PRODUCT DOES NOT POSE
A DUST HAZARD. POSSIBLE SENSITIZER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
INTERSHIELD PRORECO NON, PRA461
| |
|
MIL-H-5606G HYDRAULIC FLUID
| |
|
IMPERIAL 2075TH (QUAL #634D346)
| |
|
34-SX-97 PAINT STRIPPER, 4479
| |
|
TAP WIZARD CUTTING/TAPPING FLUID, 3859
| |
|
599 INSTRUMENT LUBRICANT 1 GALLON
| |
|
599 INSTRUMENT LUBRICANT 5 GALLON
| |
|
FLUID FILM GEL WRO-EP
| |
|
599 INSTRUMENT LUBRICANT 15 GALLON
| |
|
599 INSTRUMENT LUBRICANT 30 GALLON
| |
|
TASK MASTER BULK, TM1G
| |
|
STEEL SHOT AND GRIT
| 7439-89-6
7439-96-5
7440-21-3
7440-44-0
7704-34-9
7723-14-0
7440-50-8
7440-47-3
7440-02-0 |
|
INTERSHIELD PRORECO 58, PRA050
| 110-43-0
101-68-8
27083-55-2
26447-40-5
9016-87-9 |
|
ICE MELT/ANTIFREEZE
| 57-55-6 |
|
PLASTIC, PP 13S10A
| 9010-79-1 |
|
MTS SOLUTION, G109
| |
|
RTV 5140 SILICONE POTTING COMPOUND, 18120
| 70131-67-8
67762-90-7
1185-55-3
67-56-1 |
|
KLEAN N PRIMER, 30566
| 67-64-1
75-28-5
149-57-5
22221-10-9
58823-74-8
7439-92-1
7440-02-0 |
|
477 FIRE RETARDANT EPOXY COMPONENT B
| |
|
POTASSIUM CHLORIDE, 0865
| |
|
AROMATIC 150 FLUID
| |
|
METALCLAD CERAMALLOY CL+[AC] ACTIVATOR
| |
|
CAP-STUN WEAPON SYSTEMS
| |
|
OVERKOTE E-100 VERTIC 212295
| |
|
OVERKOTE E-100 VERTIC 212101, 122201160
| |
|
E7018, E7018AC
| |
|
POTASSIUM CHLORIDE, 3619
| |
|
SODIUM CHLORIDE
| 7647-14-5 |
|
02816,LPS HIGH PURITY NOFLASH CLEANER
| 1717-00-6
67-63-0
124-38-9 |
|
POLYVINYL CHLORIDE
| 9002-86-2
117-81-7
75-01-4 |
|
N-6605 LSA HAZE GRAY ENAMEL
| |
|
COLOR GUARD TOUGH RUBBER COATING BLACK, 81812
| 64742-48-9
66070-58-4
110-54-3
108-88-3
78-93-3 |
|
HIGH SOLIDS MAX COR PRIMER, R4001
| 1330-20-7
64742-95-6
123-42-2
78-93-3
108-83-8
14807-96-6
7789-06-2 |
|
INTERSHIELD PRORECO, PRA150
| 25068-38-6
110-43-0
64539-51-1
25036-25-3
68609-97-2
9072-62-2
1309-37-1 |
|
INTERSHIELD PRORECO 159, PRA151
| |
|
ULANOGEL 23
| 7732-18-5
409-21-2
102-71-6 |
|
PROPANE
| |
|
INTERSHIELD PRORECO 508, PRA560
| 110-43-0
55636-48-1
59330-00-6 |
|
USCO/WH: 113R79, 5614, 5113/5114, COPY CARTRIDGE, (SUPDAT)
| |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
AROCLOR 1221 SOLUTION, PP-292
| 540-84-1
11104-28-2 |
|
HIT HY 150, PART A
| |
|
HIT HY 150, PART B
| 14808-60-7
7732-18-5
94-36-0
25265-71-8
7631-86-9
9002-88-4 |
|
POTASSIUM CHLORIDE, 6788
| |
|
POTASSIUM CHLORIDE, 6801
| |
|
960 ACRYLIC COVE BASE ADHESIVE
| |
|
ODC-FREE CLEANER & DEGREASER, 22355
| 64742-48-9
5989-27-5
124-38-9 |
|
FORMICA 100 SUPER +, F100
| |
|
POLYSPEC LUX 31
| |
|
ECA 2PA
| |
|
|