HUNTSMAN POLYMERS CORPORATION -- PLASTIC, PP 13S10A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJNWZ
MSDS NAME: PLASTIC, PP 13S10A
Responsible Party
Name: HUNTSMAN POLYMERS CORPORATION
Box: 3986
City: ODESSA TX 79760
Info Phone: 915-640-7200
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Resp. Party Other MSDS No.: 154101
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HUNTSMAN POLYMERS CORPORATION
Box: 3986
City: ODESSA TX 79760
Phone: 915-640-7200
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 9010-79-1
Name: 1-PROPENE, POLYMER WITH ETHENE
Other REC Limits: N/K (FP N)
OSHA PEL: 15 MG/M3
OSHA STEL: N/K (FP N)
ACGIH TLV: 15 MG/M3
ACGIH STEL: N/K (FP N)
------------------------------
Name: NUISANCE DUST (NON-HAZARDOUS AS DEFINED IN 29 CFR 1910.1200)
OSHA PEL: 15 MG/M3
-----------------------------
Name: NUISANCE PARTICULATE (NON-HAZARDOUS AS DEFINED IN 29 CFR 1910.1200)
ACGIH TLV: 15 MG/M3
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE OVEREXPOSURE: NO APPLICABLE INFORMATION FOUND.
INHALATION: NEGLIGIBLE HAZARD AT AMBIENT TEMPERATURE. VAPORS MAY BE FORMED AT
ELEVATED TEMPERATURES. THESE VAPORS MAY BE IRRITATING TO THE EYES AND
RESPIRATORY TRACT. SKIN: PELLETS CAN BE ABRASIVE TO SKIN. MOLTEN OR HEATED
MATERIAL CAN CAUSE BURNS.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NO APPLICABLE INFORMATION FOUND.
First Aid: INHALATION: REMOVE VICTIM TO FRESH AIR. EYES: THIS PRODUCT IS AN
INERT SOLID. REMOVE FROM EYES AS ONE WOULD ANY FOREIGN OBJECT. FLUSH WITH
POTABLE WATER FOR AT LEAST 15 MINUTES. SEE MD (FP N). SKIN: F OR HOT PRODUCT,
IMMEDIATELY IMMERSE IN OR FLUSH AFFECTED AREA WITH LARGE AMOUNTS OF WATER.
INGESTION: FIRST AID IS NOT NORMALLY REQUIRED. CALL PHYSICIAN IMMEDIATELY (FP
N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILLED MATERIAL. TRANSFER TO SUITABLE
CONTAINERS FOR DISPOSAL OR RECYCLE.
Waste Disposal Methods: THIS MATERIAL, WHEN DISPOSED OF IS NOT A RCRA HAZARDOUS
WASTE. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Handling And Storage Precautions: OPERATE STORAGE AND HANDLING SYSTEMS LEAK
FREE. PRACTICE GOOD HOUSEKEEPING AND CLEANUP SPILLS IMMEDIATELY, AS THESE
PELLETS CAN PRESENT A SERIOUS SLIPPING HAZARD. THE HANDLING OF PELLETS IN
LOADING AN D UNLOADING OPERATIONS, AS WELL AS FABRICATION, MAY CAUSE NUISANCE
DUST TO BE FORMED.
Other Precautions: TAKE NECESSARY PRECAUTIONS FOR PERSONNEL PROTECTION. WHEN
UNLOADING BULK VEHICLES, DO NOT USE METAL SAMPLING DEVICES, SUCH AS A GRAIN
THIEF, DUE TO THE RISK OF STATIC SHOCK AND IGNITION HAZARD. PNEUMA TIC
HANDLING SYSTEMS, AUGERS, AND OTHER UNLOADING DEVICES SHOULD BE FREE OF
CONTAMINATES.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: CC
Flash Point: >343.3C, 650.F
Flash Point Text: (ESTIMATED)
Autoignition Temp: =570.C, 1058.F
Extinguishing Media: WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). WATER SPRAY FROM A FOGGING NOZZLE IS RECOMMENDED PROCEDURE
FOR FIGHTING FIRES INVOLVING THIS PRODUCT, SINCE IT IS A SURFACE BURNING
MATER IAL.
Unusual Fire/Explosion Hazard: MAY BURN AT OR ABOVE FLASH POINT, AND AIRBORNE
DUST MAY EXPLODE IF IGNITED. SEE NATIONAL FIRE PROTECTION ASSOCIATION
BULLETIN 654, "DUST EXPLOSION PREVENTION, PLASTIC INDUSTRY 1975".
=======================================================
Control Measures
=======================================================
Respiratory Protection: WHERE EXPOSURE TO NUISANCE DUST MAY EXCEED ACCEPTABLE
LEVELS, USE NIOSH APPROVED RESPIRATORY PROTECTION EQUIPMENT.
Ventilation: PROVIDE ADEQUATE MECHANICAL VENTILATION AT THE POINTS OF EXTRUSION
WHERE POLYPROPYLENE IS AT ELEVATED TEMPERATURES COMING FROM EXTRUDER.
Protective Gloves: WHERE THERE IS POTENTIAL FOR CONT W/HEATED MATL, WEAR HEAT
PROT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). WHERE THERE IS A POTENTIAL FOR CONTACT WITH HEATED MATERIAL,
WEAR HEAT PROTECTIVE CLOTHING.
Work Hygienic Practices: FOLLOW NORMAL PERSONAL HYGIENE AND GOOD HOUSEKEEPING
PRACTICES.
Supplemental Safety and Health: PHYSICAL/CHEMICAL PROPERTIES: VAPOR DENSITY
(AIR=1): SOLID MATERIAL; REACTIVITY IN WATER: NOT REACTIVE; MELTING POINT
WILL VARY ACCORDING TO CUSTOMER SPECIFICATIONS.
=======================================================
Physical/Chemical Properties
=======================================================
Melt/Freeze Pt: >145.C, 293.F
M.P/F.P Text: 293F - 327F
Vapor Density: SUP DAT
Spec Gravity: 0.895 - 0.905 (H*2O=1)
Solubility in Water: INSOLUBLE
Appearance and Odor: TRANSLUCENT, ODORLESS PELLETS.
Percent Volatiles by Volume: NON-VOLATILE
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: ATTACKED BY OXIDIZING AGENTS SUCH AS NITRIC OR PERCHLORIC
ACID AND FREE HALOGENS. ALSO SOFTENED BY HYDROCARBONS SUCH AS BENZENE,
GASOLINE, LUBRICATING OILS, PETROLEUM ETHER AND BY CHLORINATED HYDROCARBONS.
Hazardous Decomposition Products: CARBON, CARBON MONOXIDE, CARBON DIOXIDE AND
ORGANIC VAPORS MAY BE PRODUCED DURING THERMAL DECOMPOSITION.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: TOXICITY DATA: NO APPLICABLE INFORMATION FOUND.
CARCINOGENICITY: NO APPLICABLE INFORMATION FOUND. REPRODUCTIVE TOXICITY: NO
APPLICABLE INFORMATION FOUND.
=======================================================
Ecological Information
=======================================================
Ecological: NO APPLICABLE INFORMATION FOUND.
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA TITLE III HAZARD CATEGORY: NO APPLICABLE
INFORMATION FOUND.
Federal Regulatory Information: TSCA: NO APPLICABLE INFORMATION FOUND.
=======================================================
Other Information
=======================================================
Other Information: COMMON NAME: PLASTIC. CHEMICAL NAME: 1-PROPENE, POLYMER WITH
ETHENE. SYNONYMS: REXENE POLYPROPYLENE RESIN, POLYPROPYLENE COPOLYMER.
RATINGS: HEALTH: 1; FIRE: 1; REACTIVITY: 0. HAZARD RATING: LEAS T-0;
SLIGHT-1; MODERATE-2; HIGH-3; EXTREME-4. NON HAZARDOUS AS DEFINED IN 29 CFR
1910.1200. FOR ADDITIONAL INFORMATION ON HEALTH HAZARDS: INDUSTRIAL
HYGIENIST, HUNTSMAN POLYMERS CORPORATION, PO BOX 39 86, ODESSA, TEXAS 79760,
(915) 640-8344. SERIAL # H1845.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PLASTIC, PP 13S10A
Assigned IND: Y
Company: HUNTSMAN POLYMERS CORPORATION
PO Box: 3986
City: ODESSA TX
Zipcode: 79760
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 08/03/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE OVEREXPOSURE: INHALATION: NEGLIGIBLE HAZARD AT
AMBIENT TEMPERATURE. VAPORS MAY BE FORMED AT ELEVATED TEMPERATURES. THESE
VAPORS MAY BE IRRITATING TO THE EYES AND RESPIRATORY TRACT. SKIN: PELLETS
CAN BE ABRASIVE TO SKIN. MOLTEN OR HEATED MATERIAL CAN CAUSE BURNS. CHRONIC:
NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
INTERSHIELD PRORECO NON, PRA461
| |
|
MIL-H-5606G HYDRAULIC FLUID
| |
|
IMPERIAL 2075TH (QUAL #634D346)
| |
|
34-SX-97 PAINT STRIPPER, 4479
| |
|
TAP WIZARD CUTTING/TAPPING FLUID, 3859
| |
|
599 INSTRUMENT LUBRICANT 1 GALLON
| |
|
599 INSTRUMENT LUBRICANT 5 GALLON
| |
|
FLUID FILM GEL WRO-EP
| |
|
599 INSTRUMENT LUBRICANT 15 GALLON
| |
|
599 INSTRUMENT LUBRICANT 30 GALLON
| |
|
TASK MASTER BULK, TM1G
| |
|
STEEL SHOT AND GRIT
| 7439-89-6
7439-96-5
7440-21-3
7440-44-0
7704-34-9
7723-14-0
7440-50-8
7440-47-3
7440-02-0 |
|
INTERSHIELD PRORECO 58, PRA050
| 110-43-0
101-68-8
27083-55-2
26447-40-5
9016-87-9 |
|
ICE MELT/ANTIFREEZE
| 57-55-6 |
|
PLASTIC, PP 13S10A
| 9010-79-1 |
|
MTS SOLUTION, G109
| |
|
RTV 5140 SILICONE POTTING COMPOUND, 18120
| 70131-67-8
67762-90-7
1185-55-3
67-56-1 |
|
KLEAN N PRIMER, 30566
| 67-64-1
75-28-5
149-57-5
22221-10-9
58823-74-8
7439-92-1
7440-02-0 |
|
477 FIRE RETARDANT EPOXY COMPONENT B
| |
|
POTASSIUM CHLORIDE, 0865
| |
|
AROMATIC 150 FLUID
| |
|
METALCLAD CERAMALLOY CL+[AC] ACTIVATOR
| |
|
CAP-STUN WEAPON SYSTEMS
| |
|
OVERKOTE E-100 VERTIC 212295
| |
|
OVERKOTE E-100 VERTIC 212101, 122201160
| |
|
E7018, E7018AC
| |
|
POTASSIUM CHLORIDE, 3619
| |
|
SODIUM CHLORIDE
| 7647-14-5 |
|
02816,LPS HIGH PURITY NOFLASH CLEANER
| 1717-00-6
67-63-0
124-38-9 |
|
POLYVINYL CHLORIDE
| 9002-86-2
117-81-7
75-01-4 |
|
N-6605 LSA HAZE GRAY ENAMEL
| |
|
COLOR GUARD TOUGH RUBBER COATING BLACK, 81812
| 64742-48-9
66070-58-4
110-54-3
108-88-3
78-93-3 |
|
HIGH SOLIDS MAX COR PRIMER, R4001
| 1330-20-7
64742-95-6
123-42-2
78-93-3
108-83-8
14807-96-6
7789-06-2 |
|
INTERSHIELD PRORECO, PRA150
| 25068-38-6
110-43-0
64539-51-1
25036-25-3
68609-97-2
9072-62-2
1309-37-1 |
|
INTERSHIELD PRORECO 159, PRA151
| |
|
ULANOGEL 23
| 7732-18-5
409-21-2
102-71-6 |
|
PROPANE
| |
|
INTERSHIELD PRORECO 508, PRA560
| 110-43-0
55636-48-1
59330-00-6 |
|
USCO/WH: 113R79, 5614, 5113/5114, COPY CARTRIDGE, (SUPDAT)
| |
|
RUST AWAY
| 7664-38-2
7647-01-0 |
|
AROCLOR 1221 SOLUTION, PP-292
| 540-84-1
11104-28-2 |
|
HIT HY 150, PART A
| |
|
HIT HY 150, PART B
| 14808-60-7
7732-18-5
94-36-0
25265-71-8
7631-86-9
9002-88-4 |
|
POTASSIUM CHLORIDE, 6788
| |
|
POTASSIUM CHLORIDE, 6801
| |
|
960 ACRYLIC COVE BASE ADHESIVE
| |
|
ODC-FREE CLEANER & DEGREASER, 22355
| 64742-48-9
5989-27-5
124-38-9 |
|
FORMICA 100 SUPER +, F100
| |
|
POLYSPEC LUX 31
| |
|
ECA 2PA
| |
|
|