LAROCHE CHEMICALS -- HCFC-141B
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSXYF
MSDS NAME: HCFC-141B
Responsible Party
Name: LAROCHE CHEMICALS
Box: 5500
City: GRAMERCY LA 70052
Info Phone: 800-528-4963
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LAROCHE CHEMICALS
Address: UNKNOWN
City: GRAMERCY LA 70052
Phone: 800-528-4963
=======================================================
Ingredients
=======================================================
Cas: 1717-00-6
RTECS #: KI0997000
Name: ETHANE, 1,1-DICHLORO-1-FLUORO-; (1-1,-DICHLORO-1-FLUOROETHANE)
% Wt: 99.5
Other REC Limits: 500 PPM (MFR)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
Ozone Depleting Chemical: 2
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50:(ORAL RAT) >5 GM/KG
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONTACT:VAPOR & LIQUID ARE IRRITATING TO EYES.
SKIN CONTACT:CONTACT W/LIQUID MAY CAUSE DRYING OF SKIN. CHEMICAL ITSELF IS
NOT AN IRRITANT OR SENSITIZER. INHAL:MAY CAUSE DROWSINESS, UNCONSCIOUSNESS ,
RESPIRATORY DEPRESSION & POSSIBLE DEATH DUE TO ASPHYXIATION AT HIGH
CONCENTRATIONS. INGEST:NOT (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:LIKELY DUE TO LOW TOXICITY.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES:IMMED FLUSH W/PLENTY OF CLEAN WATER FOR AT LEAST 15 MINS. GET
MED ATTN. SKIN:REMOVE CONTAMD CLOTHING & SHOES. WASH AFFECTED AREA FOR AT
LEAST 15 MINS. GET MED ATTN. INHAL:REMOVE FROM CONTAMD AREA . APPLY OXYGEN IF
BRTHG IS DFCLT. GIVE ARTF RESP IF BRTHG HAS STOPPED. GET MED ATTN.
INGEST:SMALL AMTS OF CMPD NOT NORMALLY HAZ BY INGEST. IF LGE QTYS INGESTED,
DO NOT INDUCE VOM. GET MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: STOP DISCHARGE IF POSSIBLE. KEEP PEOPLE AWAY. REMOVE
OR EXTINGUISH IGNITION OR COMBUSTION SOURCES. USE FORCED AIR VENTILATION, IF
NECESSARY IN CONFINED SPACES, TO CONTROL DISPERSED GAS LEVELS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: PROD AS COMMERCIALLY PRDCED IS NOT A LISTED HAZ WASTE.
DISP OF THIS PROD MUST BE I/A/W APPROP FED, STATE & LOC ENVIRON LAWS
& REGS. DO NOT VENT TO ATM. IT IS RECOM THAT PROD WASTE BE COLLECTED FOR
POS S RECYCLE/RECLAMATION ACTIVITIES. IF (SUP DAT)
Handling And Storage Precautions: STORE IN WELL VENTILATED AREA. CONTACT W/
FLAME OR HIGH TEMPERATURE SHOULD BE AVOIDED. KEEP CONTAINER CLOSED WHEN NOT
IN USE.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: >180F,>82C
Lower Limits: 7.4%
Upper Limits: 15.5%
Extinguishing Media: USE WATER SPRAY OR FOG, CARBON DIOXIDE, DRY CHEMICAL OR
WATER STREAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). KEEP CONTRS COOL. STOP FLOW OF GAS. DO NOT PUT FIRE OUT
UNLESS LEAK CAN BE STOPPED SAFELY.
Unusual Fire/Explosion Hazard: MAY DECOMPOSE IN CONTACT W/FLAMES OR HEAT TO
FORM HYDROGEN CHLORIDE &/OR HYDROGEN FLUORIDE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: ATM LEVELS SHOULD BE MAINTAINED BELOW EXPOSURE
GUIDELINE. WHERE EXPOSURE GUIDELINES MAY BE GREATLY EXCEEDED, USE A NIOSH/
MSHA APPRVD POSITIVE PRESS SCBA. IN CONFINED OR POORLY VENTILATED AREAS, USE
A NIOSH/MSHA APPRVD POSITIVE SCBA.
Ventilation: CONTROL AIRBORNE CONC BELOW EXPOS GUIDELINE. USE ONLY W/ADEQ VENT.
LOCAL EXHST VENT MAY BE NEC FOR SOME OPERATIONS.
Protective Gloves: BUTYL RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKER GOGGLES (FP N).
Other Protective Equipment: BRIEF CONT, NO PRECS OTHER THAN CLEAN BODY-
COVERING CLTHG. WHEN PRLNGD/RPTD CONT COULD OCCUR, USE PROT CLTHG (SUPP DATA
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: MATLS TO AVOID:SHAVINGS; GRANULAR BARIUM. WASTE
DISP METH:SUCH OPTIONS ARE NOT AVAILABLE, THEN MATERIAL SHOULD BE SENT TO AN
EPA APPROVED INCINERATOR. OTHER PROT EQUIP:SUCH AS BUTYL RUBBER, IMPERVIOUS
TO THIS MATERIAL.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: T6
B.P. Text: 89.6F,32.0C
Vapor Pres: 517 @ 70F
Vapor Density: 4
Spec Gravity: 1.25 (H2O=1)
Evaporation Rate & Reference: 0.4 (ETHER=1)
Solubility in Water: 0.021%
Appearance and Odor: CLEAR, COLORLESS, LIQUIFIED GAS W/FAINT ETHEREAL ODOR.
Percent Volatiles by Volume: 100
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID OPEN FLAMES & HIGH TEMPERATURES.
Materials To Avoid: CHEMICALLY ACTIVE METALS SUCH AS SODIUM, POTASSIUM,
CALCIUM, POWDERED ALUMINUM, ZINC, MAGNESIUM & LITHIUM (SUP DAT)
Hazardous Decomposition Products: MAY DECOMPOSE TO HYDROGEN CHLORIDE & HYDROGEN
FLUORIDE AT TEMPERATURES ABOVE 600C.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HCFC-141B
Company: LAROCHE CHEMICALS
Street: UNKNOWN
City: GRAMERCY LA
Zipcode: 70052
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 08/09/1993
Status Code: C
Label Date: 08/09/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: Slight
Hazard And Precautions: COMBUSTIBLE. MAY FORM HAZARDOUS DECOMPOSITION PRODUCTS.
STORE IN WELL VENTILATED AREA. CONTACT WITH FLAMES OR HIGH TEMPERATURES
SHOULD BE AVOIDED. KEEP CONTAINER CLOSED WHEN NOT IN USE. ACUTE: VAPORS ARE
IRRITATING TO EYES AND SKIN. MAY CAUSE DROWSINESS, UNCONSCIOUSNESS,
RESPIRATORY DEPRESSION AND DEATH DUE TO ASPHYXIATION AT HIGH CONCENTRATIONS.
CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
RUS-KIL-SAFETY RED, 0001072
| |
|
EPL 700 GENERAL PURPOSE ADHESIVE RESIN PART A
| |
|
EPL 700 GENERAL PURPOSE ADHESIVE HARDENER PART B
| |
|
3M TYPE 164 TONER
| 25767-47-9
58353-09-6
8005-02-5
1333-86-4
9003-07-4
7631-86-9 |
|
3M TYPE 264 DEVELOPER
| 7439-89-6
25767-47-9
58353-09-6
1333-86-4
9003-07-4
8005-02-5 |
|
ACETONE, 62986
| 67-64-1
71-43-2 |
|
VERSILOK HI 410 (AD5312-40)
| 80-62-6
79-41-4
101-43-9
38668-48-3
121-69-7
52628-03-2 |
|
T-250 CEMENT GRAY PART A, PG-0250-1761-3-A
| |
|
T-250 CEMENT GRAY PART B PG-0250-177800-B
| |
|
MAGNATAC A-39 PART A
| |
|
ANCHOR-IT 321 INJECTION RESIN, RESIN PART A
| |
|
ANCHOR-IT 321 INJECTION RESIN, HARDENER PART B
| |
|
08107 BASE (1XA), AUTOMIX FAST CURE EPOXY (SUPDAT)
| 25068-38-6 |
|
08107 ACCELERATOR (1XA), AUTOMIX FAST CURE (SUPDAT)
| |
|
6110/6112 TONER
| 1333-86-4
27136-15-8
8005-02-7 |
|
C-400
| 7664-93-9 |
|
MAZU DF 251 CONC
| |
|
HAZORB - UNIVERSAL
| 65997-17-3 |
|
MUNOX GT
| |
|
KATALYST 41/22 BLEND/REACTOR, HD-0022-B. MSD
| |
|
MAZU DF 6000K
| |
|
T-250 CEMENT GRAY PART A, PG-0250-1761-3-A
| |
|
T-250 CEMENT GRAY PART B, PG-0250-177800-B
| |
|
TONER FOR SO50002
| |
|
720 EPOXY MORTAR & GROUT, PART B
| |
|
STP ENGINE TREATMENT WITH XEP2, ST1019CAN
| |
|
ZINC STANDARD SOLUTION 100.0 +/- 10 MG/L AS ZN, 2378
| 7646-85-7
7647-01-0
7732-18-5 |
|
SODIUM NITRITE, 2452
| 7632-00-0 |
|
MERCURIC CHLORIDE SOLUTION 10 G/L, 14994
| 7487-94-7
7732-18-5 |
|
NITRATE NITROGEN STD SOLN 10.0 +/- 0.1 MG/L AS N, 307
| 7757-79-1
7732-18-5 |
|
SODIUM ARSENITE SOLUTION APHA 5 G/L, 1047
| 7784-46-5
7732-18-5 |
|
THYMOLPHTHALEIN INDICATOR SOLUTION 1 G/1, 21853
| 67-63-0
125-20-2
7732-18-5 |
|
R-134A HFC-134A TETRAFLUOROETHANE
| 811-97-2 |
|
HCFC-141B
| 1717-00-6 |
|
R-23 HFC-23 REFRIGERANT 23
| 75-46-7 |
|
R-114 CFC-114 REFRIGERANT 114
| 76-14-2 |
|
R-113 CFC-113 REFRIGERANT 113
| 76-13-1 |
|
KITS 5633K SERIES
| 5989-27-5
64771-72-8 |
|
KITS 5637K SERIES
| 5989-27-5
64771-72-8 |
|
10ML OMC SCREW LOCK, 10221
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
ORANGE SCRUBBER, 98277
| 8001-97-6
61789-91-1
8006-54-0
26172-55-4
2682-20-4
138-86-3
37311-02-7
1332-09-8
9003-01-4
102-71-6 |
|
SEMI-VOLATILES GC/MS TUNING STANDARD, GCM-150
| 75-09-2
5074-71-5
92-87-5
50-29-3
87-86-5 |
|
PALLADIUM PLATING SOLUTION 1/8 LITER, 30934001
| |
|
PALLADIUM PLATING SOLUTION 1/4 LITER, 30934002
| |
|
PALLADIUM PLATING SOLUTION 1/2 LITER, 30934003
| |
|
PALLADIUM PLATING SOLUTION 1 LITER, 30934004
| |
|
AIR BLOWN ASPHALT
| 8052-42-4 |
|
SODIUM HYDROXIDE 0.1600 +/- 0.0007N, 14377
| 1310-73-2
7732-18-5 |
|
AMMONIA 1, 21064
| 6381-59-5 |
|
AMMONIA 2 (NESSLER METHOD), 21065
| 7783-33-7
1310-66-3 |
|
|