ADHESIVES TECHNOLOGY CORP -- ANCHOR-IT 321 INJECTION RESIN, HARDENER PART
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSXRM
MSDS NAME: ANCHOR-IT 321 INJECTION RESIN, HARDENER PART B
Kit Part: Y
Responsible Party
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 SOUTH 228TH ST SUITE 101
City: KENT WA 98032
Info Phone: 206-850-2400
Emergency Phone Number: 800-255-3924
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ADHESIVE TECHNOLOGY CORP
Address: 4210 B STREET N.W. SUITE D
City: AUBURN WA 98001
Phone: 206-850-2400
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 S 228TH ST SUITE 101
City: KENT WA 98032
Phone: 206-850-2400
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CONTACT WITH SKIN WILL CAUSE SEVERE BURNS. AVOID BREATHING
VAPORS.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN: WASH WITH WATERLESS HAND CLEANER THEN WARM SOAP AND WATER FOR
AT LEAST 15 MIN, THEN APPLY A PROTECTIVE CREAM. INHAL: REMOVE TO FRESH AIR.
EYES: CALL A PHYSICIAN. FLUSH WITH WARM WATER FOR AT LEA ST 15 MIN. CLOTHING:
REMOVE CONTAMINATED CLOTHING IMMEDIATELY, AND WASH SKIN. INGEST: GET MD
IMMEDIATELY (FP N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CLEAN UP WITH ABSORBENT MATERIAL. WASH AREA WITH
WARM, SOAPY WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: DO NOT MIX OR STORE WITH STRONG OXIDANTS.
Other Precautions: AVOID ALL CONTACT WITH SKIN & EYES. AVOID BREATHING
VAPORS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 200F,93C
Extinguishing Media: FOAM, CO2, FOG.
Fire Fighting Procedures: AVOID BREATHING VAPORS. USE NIOSH/MSHA APPROVED SCBA
AND FULL PROTECTIVE EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N).
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKER GOGGLES (FP N).
Other Protective Equipment: PROTECTIVE CLOTHING. EMERGENCY EYEWASH AND DELUGE
SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: KEY1;T6.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: T6
Solubility in Water: VERY LOW
Appearance and Odor: AMBER LIQUID.
Percent Volatiles by Volume: NIL
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDANTS.
Hazardous Decomposition Products: NONE SPECIFIED BY MANUFACTURER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ANCHOR-IT 321 INJECTION RESIN, HARDENER PART B
Assigned IND: Y
Company: ADHESIVES TECHNOLOGY CORP
Street: 8041 S 228TH ST SUITE 101
City: KENT WA
Zipcode: 98032
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 08/20/1993
Status Code: C
Label Date: 08/20/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: DO NOT MIX OR STORE W/STRONG OXIDANTS. AVOID ALL
CONTACT W/SKIN & EYES. AVOID BREATHING VAPORS. ACUTE: CONTACT W/SKIN WILL
CAUSE SEVERE BURNS. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.