MOBILE PAINT MFG INC -- RUS-KIL-SAFETY RED, 0001072
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSXMY
MSDS NAME: RUS-KIL-SAFETY RED, 0001072
Responsible Party
Name: MOBILE PAINT MFG CO INC
Box: 717
City: THEODORE AL 36582
Info Phone: 205-443-6110
Emergency Phone Number: 800-255-3924
Preparer's Name: JULIE HOAGLAND
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MOBILE PAINT MANUFACTURING CO INC
Box: 717
City: THEODORE AL 36582
Phone: 334-443-6110
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: RPTS ASSOC RPT/PRLNG OCCUP OVEREXP TO SOLVENTS W/PERM
BRAIN & NERVOUS SYS DMG. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATNG
& INHAL CONTENTS MAY BE HARMFUL/FATAL. INHAL:ANESTH. EXCESSIVE INHAL CAN
CAUSE IRRIT OF RESP TRACT/ACUTE NERVOUSSYS DEPRESS CHARACTERIZED BY HDCH,
DIZZ, STAG GAIT, CONFUSN, (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:UNCON, COMA & EVEN ASPHY.
SKIN:MOD IRRIT, DEFAT, DERM. MAY BE SENSITIZER IN SOME. LIQ CAN BE ABSORBED
THRU SKIN RSLTG IN SYMP SIMILAR TO INHAL EFTS. EYES:SEV IRRIT, REDNESS,
TEARING, BLURRED VISION. MAY BE SENSITIZER IN SOME. INGEST:GI IRRIT, NAUS,
VOMIT & DIARR. ASPIR INTO LUNGS DURING INGEST/VOMIT (SUPDAT)
Medical Cond Aggravated By Exposure: EXPOSURE TO PETROLEUM SOLVENTS MAY
AGGRAVATE PRE-EXISTING DERMATITIS.
First Aid: INHAL:REMOVE TO FRESH AIR. ADMIN OXYGEN IF BRTHG DFCLT. RESTORE
BRTHG IF NECESSARY. TREAT SYMPTOMATICALLY. CONSULT MD. SKIN:WASH AFFECTED
AREAS W/SOAP & WATER. REMOVE & LAUNDER CONTAMD CLTHG. CONSULT MD IF
NEEDED. EYES:FLUSH IMMED W/LG AMTS WATER FOR @ LEAST 15 MIN. TAKE TO MD FOR
MED TREATMENT. INGEST:DRINK 1 OR 2 GLASSES WATER TO DILUTE. DO NOT INDUCE
VOMIT. GET MED HELP IMMED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNIT (FLAME, HOT SURF &
ELEC, STATIC/FRICTIONAL SPARKS). AVOID BRTHG VAPS. VENT AREA. CONTAIN &
REMOVE W/INERT ABSORBENT & NON-SPARKING TOOLS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE IN ACCORDANCE WITH LOCAL, STATE & FEDERAL
REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT INCINERATE CLOSED
CONTAINERS.
Handling And Storage Precautions: DO NOT STORE ABOVE 120F. STORE LG QTYS ONLY
IN BLDGS DESIGNED TO COMPLY W/OSHA 1910.106. KEEP CLOSURES TIGHT & CONTR
UPRIGHT TO PRVNT LEAKAGE.(SUPDAT)
Other Precautions: DO NOT GET IN EYES. AVOID SKIN CNTCT. CAN CAUSE ALLERGIC
RESP & SKIN RXNS. PVNT RPT/PRLNG BRTHG OF VAPS/SPRAY MIST. AVOID BRTHG
SANDING DUST. WASH CONTAMD CLTHG THORO. WASH SKIN THORO W/SOAP & WATER A
FTER HNDLG. CLOSE CONTR AFTER
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: >100F,>38C
Lower Limits: 0.9%
Upper Limits: 7.0%
Extinguishing Media: FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP (FP
N). CLSD CNTRS MAY EXPLODE WHEN EXPOS TO EXTREME HEAT. APPLICATN TO HOT SURF
REQ SPEC PREC. WATER SPRAY(SUPDAT)
Unusual Fire/Explosion Hazard: DURING EMER CNDTNS OVEREXP TO DECOMP PRODS MAY
CAUSE HLTH HAZ. SYMPS MAY NOT BE IMMED APPARENT. OBTAIN MED ATTN. KEEP CONTRS
TIGHTLY CLSD. ISOLATE FROM (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OUTDOOR/OPEN AREAS USE NIOSH/MSHA APPRVD MECH FILTER
RESP TO REMOVE SOLID AIRBORNE PARTICLES. IN RESTRICTED VENT AREAS USE
NIOSH/MSHA APPRVD CHEM-MECH FILTERS DESIGNED TO REMOVE COMBINATION PARTICU
LATE & GAS & VAPOR. IN CONFINED
Ventilation: APPLICATN AREAS SHLD BE VENT IAW OSHA REG 29 CFR 1910.94,
1910.107, 1910.108. REMOVE DECOM PROD FORMED DURING
Protective Gloves: GLOVES RECOMMENDED.
Eye Protection: CHEMICAL SAFETY GOGGLES (FP N).
Other Protective Equipment: USE PROT OUTER-WEAR & PVNT PRLNG SKIN CONTACT
W/CONTAMD CLTHG.
Work Hygienic Practices: AVOID BRTHG VAPS & CNTCT W/SKIN. WASH SKIN THORO
BEFORE BREAKS & MEALS & AT END OF WORK PERIOD.
Supplemental Safety and Health: FIRE FIGHT PROC:MAY BE INEFTIVE. IF WATER USED,
FOG NOZZLES PREF. WATER MAY BE USED TO COOL CLSD CONTRS TO PVNT PRESS
BUILD-UP. EXPLO HAZ:HEAT, SPARKS & OPEN FLAME. EFTS OF OVEREXP:MAY CAUSE
MILD TO S EV PULM INJURY & POSS DEATH. HNDLG/STORPREC:DO NOT STORE/USE
NEAR HEAT/SPARKS/FLAME. NEVER USE PRESS TO EMPTY.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F4
B.P. Text: 300F,149C
M.P/F.P Text: NOT KNOWN
Decomp Text: NOT KNOWN
Vapor Pres: SEE ING 1
Vapor Density: HVR/AIR
Spec Gravity: 0.9 (H*2O=1)
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: NEGLIGIBLE
Appearance and Odor: TYPICAL PAINT SOLVENT ODOR.
Percent Volatiles by Volume: INGS
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HIGH TEMPERATURES.
Materials To Avoid: OXIDIZING MATERIALS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: RUS-KIL-SAFETY RED, 0001072
Company: MOBILE PAINT MANUFACTURING CO INC
PO Box: 717
City: THEODORE AL
Zipcode: 36582
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 08/26/1993
Status Code: C
Label Date: 08/26/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. REPORTS ASSOCIATE RPT/PRLNG OCCUPATIONAL
OVEREXP TO SOLVENTS W/PERM BRAIN & NERVOUS SYS DAMAGE. INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATNG & INHALING CONTENTS MAY BE HARMFUL/FATAL. I
NHALATION & SKIN ABSORPTION:ANESTHETIC.EXCESSIVE INHALATION CAN CAUSE
IRRIT OF RESP TRACT/ACUTE NERVOUS SYSTEM DEPRESS CHARACTERIZED BY HEADACHE,
DIZZINESS, STAG GAIT, CONFUSION, UNCONSCIOUSNESS, COMA & EVEN DEATH. MAY
CAUSE MODERATE SKIN IRRITATION ALONG W/DEFATTING & DERMATITIS. EYE
CONTACT CAUSES SEVERE IRRITATION, TEARING, BLURRING & REDNESS. INGESTION
CAUSES IRRITATION, NAUSEA, VOMITING & DIA RRHEA. CHRONIC: NONE SPECIFIED
BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
RUS-KIL-SAFETY RED, 0001072
| |
|
EPL 700 GENERAL PURPOSE ADHESIVE RESIN PART A
| |
|
EPL 700 GENERAL PURPOSE ADHESIVE HARDENER PART B
| |
|
3M TYPE 164 TONER
| 25767-47-9
58353-09-6
8005-02-5
1333-86-4
9003-07-4
7631-86-9 |
|
3M TYPE 264 DEVELOPER
| 7439-89-6
25767-47-9
58353-09-6
1333-86-4
9003-07-4
8005-02-5 |
|
ACETONE, 62986
| 67-64-1
71-43-2 |
|
VERSILOK HI 410 (AD5312-40)
| 80-62-6
79-41-4
101-43-9
38668-48-3
121-69-7
52628-03-2 |
|
T-250 CEMENT GRAY PART A, PG-0250-1761-3-A
| |
|
T-250 CEMENT GRAY PART B PG-0250-177800-B
| |
|
MAGNATAC A-39 PART A
| |
|
ANCHOR-IT 321 INJECTION RESIN, RESIN PART A
| |
|
ANCHOR-IT 321 INJECTION RESIN, HARDENER PART B
| |
|
08107 BASE (1XA), AUTOMIX FAST CURE EPOXY (SUPDAT)
| 25068-38-6 |
|
08107 ACCELERATOR (1XA), AUTOMIX FAST CURE (SUPDAT)
| |
|
6110/6112 TONER
| 1333-86-4
27136-15-8
8005-02-7 |
|
C-400
| 7664-93-9 |
|
MAZU DF 251 CONC
| |
|
HAZORB - UNIVERSAL
| 65997-17-3 |
|
MUNOX GT
| |
|
KATALYST 41/22 BLEND/REACTOR, HD-0022-B. MSD
| |
|
MAZU DF 6000K
| |
|
T-250 CEMENT GRAY PART A, PG-0250-1761-3-A
| |
|
T-250 CEMENT GRAY PART B, PG-0250-177800-B
| |
|
TONER FOR SO50002
| |
|
720 EPOXY MORTAR & GROUT, PART B
| |
|
STP ENGINE TREATMENT WITH XEP2, ST1019CAN
| |
|
ZINC STANDARD SOLUTION 100.0 +/- 10 MG/L AS ZN, 2378
| 7646-85-7
7647-01-0
7732-18-5 |
|
SODIUM NITRITE, 2452
| 7632-00-0 |
|
MERCURIC CHLORIDE SOLUTION 10 G/L, 14994
| 7487-94-7
7732-18-5 |
|
NITRATE NITROGEN STD SOLN 10.0 +/- 0.1 MG/L AS N, 307
| 7757-79-1
7732-18-5 |
|
SODIUM ARSENITE SOLUTION APHA 5 G/L, 1047
| 7784-46-5
7732-18-5 |
|
THYMOLPHTHALEIN INDICATOR SOLUTION 1 G/1, 21853
| 67-63-0
125-20-2
7732-18-5 |
|
R-134A HFC-134A TETRAFLUOROETHANE
| 811-97-2 |
|
HCFC-141B
| 1717-00-6 |
|
R-23 HFC-23 REFRIGERANT 23
| 75-46-7 |
|
R-114 CFC-114 REFRIGERANT 114
| 76-14-2 |
|
R-113 CFC-113 REFRIGERANT 113
| 76-13-1 |
|
KITS 5633K SERIES
| 5989-27-5
64771-72-8 |
|
KITS 5637K SERIES
| 5989-27-5
64771-72-8 |
|
10ML OMC SCREW LOCK, 10221
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
ORANGE SCRUBBER, 98277
| 8001-97-6
61789-91-1
8006-54-0
26172-55-4
2682-20-4
138-86-3
37311-02-7
1332-09-8
9003-01-4
102-71-6 |
|
SEMI-VOLATILES GC/MS TUNING STANDARD, GCM-150
| 75-09-2
5074-71-5
92-87-5
50-29-3
87-86-5 |
|
PALLADIUM PLATING SOLUTION 1/8 LITER, 30934001
| |
|
PALLADIUM PLATING SOLUTION 1/4 LITER, 30934002
| |
|
PALLADIUM PLATING SOLUTION 1/2 LITER, 30934003
| |
|
PALLADIUM PLATING SOLUTION 1 LITER, 30934004
| |
|
AIR BLOWN ASPHALT
| 8052-42-4 |
|
SODIUM HYDROXIDE 0.1600 +/- 0.0007N, 14377
| 1310-73-2
7732-18-5 |
|
AMMONIA 1, 21064
| 6381-59-5 |
|
AMMONIA 2 (NESSLER METHOD), 21065
| 7783-33-7
1310-66-3 |
|
|