FIRST BRANDS CORP -- STP ENGINE TREATMENT WITH XEP2, ST1019CAN
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSXWZ
MSDS NAME: STP ENGINE TREATMENT WITH XEP2, ST1019CAN
Responsible Party
Name: FIRST BRANDS CORP
Address: 88 LONG HILL ST
City: EAST HARTFORD CT 06108
Info Phone: 203-731-2300;203-728-6194
Emergency Phone Number: 203-728-6194;800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: FIRST BRANDS CORP (PHONE:203-728-6194)
Address: 88 LONG HILL ST
City: EAST HARTFORD CT 06108
Phone: 203-731-2300, CHEMTREC 800-424-9300
Name: PRESTONE PRODUCTS CORP
Address: 39 OLD RIDGEBURY RD
City: DANBURY CT 06810-5109
Phone: 203-731-3686/830-7865
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE LISTED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGEST: ACCIDENTAL INGEST OF SML AMT OF PROD IS EXPECTED
TO HAVE LITTLE ACUTE TOX. MILD MUC MEMB IRRIT, NAUS, VOMIT, ABDOM PAIN,
BELCHING & DIARR MAY OCCUR. SERIOUS POTNTL TOX EFT WHICH MAY OCCUR DURI
NG INGEST/VOMIT IS POSS ASPIR OF PROD INTO LUNGS WHICH COULD RSLT IN SERIOUS
LUNG INJ. SKIN ABSORP: NO (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:EVIDENCE OF ADVERS EFTS FROM
AVAIL INFO. INHAL: INHAL OF PROD IS UNLIKELY W/NORM USAGE. BUT IF MIST/VAP
FORM, LUNG DMG MAY OCCUR IF EXPOS IS PRLNGD IN POORLY VENT SURROUNDINGS.
WARNING: IF PR OD IS OVERHEATED, ESPEC IN PRESENCE OF WATER, HYDROGEN SULFIDE
MAY BE RELS; THIS CAN CAUSE RESP COLLAPSE, COMA &
Medical Cond Aggravated By Exposure: EXISTING DERMATITIS.
First Aid: INGEST:DO NOT INDUCE VOMIT. SEEK IMMED MED ATTN BY CALLING PHYS,
POIS CNTRL CNTR OR HOSP EMER ROOM. SKIN: REMOVE CONTAMD CLTHG & SHOES.
WASH ALL AFFECTED & EXPOS AREAS W/SOAP & WATER. IF REDNESS & SWE
LLING DEVELOPS & PERSISTS, SEEK MED ATTN. INHAL: INHAL OF PROD IS
UNLIKELY W/NORM USAGE. IF SYMPS DEVELOP, REMOVE TO FRESH AIR. IF BRTHG
BECOMES DFCLT GIVE OXYGEN. ADMIN ARTF RESP IF BRTHG
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT. COLLECT
FOR DISPOSAL. LARGER SPILLS MAY BE ABSORBED WITH VERMICULITE OR SIMILAR
MATERIAL.
Neutralizing Agent: NONE LISTED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE OR RECYCLE IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS.
Handling And Storage Precautions: USE ONLY W/ADEQ VENT. KEEP AWAY FROM HEAT,
SPARKS, & FLAMES. KEEP CNTNRS CLSD WHEN NOT IN USE. DO NOT REUSE EMPTY
DRUMS/PAILS UNLESS PROPERLY CLEANED.
Other Precautions: DO NOT HEAT PROD >70C AS HIGHER TEMPS CAN RSLT IN
EXOTHERMIC DECOMP OF ZINC DIALKYLDITHIOPHOSPHATE LEADING TO RELS OF HIGHLY
TOX HYDROGEN SULFIDE & POSS ALKYL MERCAPTANS. STORE IN COOL, DRY WELL
VENT AREA AWAY FROM EXCESSIVE HEAT & (SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TOC
Flash Point Text: >325F,>163C
Extinguishing Media: WATER FOG, CHEMICAL FOAM, DRY CHEMICAL AND CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NEEDED UNDER NORM USE CNDTNS. FOR OPER WHERE TLV
MAY BE EXCEEDED, NIOSH/MSHA APPRVD ORG VAP RESP IS RECOM. EQUIP SELECTION
DEPENDS ON CONTAM TYPE & CONC, SELECT I/A/W 29 CFR 1910.134 & GOOD
INDUS TRIAL HYGIENE PRACT. FOR
Ventilation: GEN VENT SHOULD BE ADEQ FOR NORM USE. FOR OPER WHERE TLV MAY BE
EXCEEDED, FORCED VENT SUCH AS LOC EXHST MAY BE
Protective Gloves: NITRILE OR NEOPRENE GLOVES.
Eye Protection: CHEMICAL SAFETY GOGGLES (FP N).
Other Protective Equipment: PROT CLTHG IF NEEDED TO AVOID PRLNGD/RPTD SKIN
CONT. SUITABLE WASHING & EYE FLUSHING FACILITIES SHOULD BE AVAIL
Work Hygienic Practices: CONTAMD CLOTHING SHOULD BE IMMED REMOVED AND LAUNDERED
BEFORE RE-USE. WASH THORO WITH SOAP AND WATER AFTER HANDLING.
Supplemental Safety and Health: USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR FURTHER INFO (FP N). OTHER PREC: OXIDIZERS. EMPTY CNTNRS RETAIN
PROD RESIDUES & MAY BE DANGEROUS. DO NOT REUSE EMPTY CNTNRS UNLESS
PROPERLY CLEANED .DO NOT CUT/WELD ON/NEAR EMPTY DRUMS/PAILS. OBSERVE ALL REQS
OF PLANT, COMPANY/GOVT REGS. KEEP OUT OF REACH OF CHILDREN.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V6
B.P. Text: 500F,260C
Spec Gravity: 0.86-0.89(FP N)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: DARK AMBER LIQUID HYDROCARBON ODOR.
Percent Volatiles by Volume: <1
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: KEEP AWAY FROM HEAT, SPARKS, AND FLAMES.
Materials To Avoid: STRONG OXIDIZERS.
Hazardous Decomposition Products: CARBON MONOXIDE AND ASPHYXIANTS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: STP ENGINE TREATMENT WITH XEP2, ST1019CAN
Assigned IND: Y
Company: FIRST BRANDS CORP (PHONE:203-728-6194)
Street: 88 LONG HILL ST
City: EAST HARTFORD CT
Zipcode: 06108
Health Emergency Phone: 203-728-6194;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 08/25/1993
Status Code: C
Label Date: 08/25/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: INGEST: ACCIDENTAL INGEST OF SML
AMT OF PROD IS EXPECTED TO HAVE LITTLE ACUTE TOX. MILD MUC MEMB IRRIT, NAUS,
VOMIT, ABDOM PAIN, BELCHING & DIARR MAY OCCUR. SERIOUS POTNTL TOX EFT
WHICH MAY OCCUR DURING INGEST/VOMIT IS POSS ASPIR OF PROD INTO LUNGS WHICH
COULD RSLT IN SERIOUS LUNG INJ. SKIN ABSORP: NO EVIDENCE OF ADVERSE EFFECTS.
CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
RUS-KIL-SAFETY RED, 0001072
| |
|
EPL 700 GENERAL PURPOSE ADHESIVE RESIN PART A
| |
|
EPL 700 GENERAL PURPOSE ADHESIVE HARDENER PART B
| |
|
3M TYPE 164 TONER
| 25767-47-9
58353-09-6
8005-02-5
1333-86-4
9003-07-4
7631-86-9 |
|
3M TYPE 264 DEVELOPER
| 7439-89-6
25767-47-9
58353-09-6
1333-86-4
9003-07-4
8005-02-5 |
|
ACETONE, 62986
| 67-64-1
71-43-2 |
|
VERSILOK HI 410 (AD5312-40)
| 80-62-6
79-41-4
101-43-9
38668-48-3
121-69-7
52628-03-2 |
|
T-250 CEMENT GRAY PART A, PG-0250-1761-3-A
| |
|
T-250 CEMENT GRAY PART B PG-0250-177800-B
| |
|
MAGNATAC A-39 PART A
| |
|
ANCHOR-IT 321 INJECTION RESIN, RESIN PART A
| |
|
ANCHOR-IT 321 INJECTION RESIN, HARDENER PART B
| |
|
08107 BASE (1XA), AUTOMIX FAST CURE EPOXY (SUPDAT)
| 25068-38-6 |
|
08107 ACCELERATOR (1XA), AUTOMIX FAST CURE (SUPDAT)
| |
|
6110/6112 TONER
| 1333-86-4
27136-15-8
8005-02-7 |
|
C-400
| 7664-93-9 |
|
MAZU DF 251 CONC
| |
|
HAZORB - UNIVERSAL
| 65997-17-3 |
|
MUNOX GT
| |
|
KATALYST 41/22 BLEND/REACTOR, HD-0022-B. MSD
| |
|
MAZU DF 6000K
| |
|
T-250 CEMENT GRAY PART A, PG-0250-1761-3-A
| |
|
T-250 CEMENT GRAY PART B, PG-0250-177800-B
| |
|
TONER FOR SO50002
| |
|
720 EPOXY MORTAR & GROUT, PART B
| |
|
STP ENGINE TREATMENT WITH XEP2, ST1019CAN
| |
|
ZINC STANDARD SOLUTION 100.0 +/- 10 MG/L AS ZN, 2378
| 7646-85-7
7647-01-0
7732-18-5 |
|
SODIUM NITRITE, 2452
| 7632-00-0 |
|
MERCURIC CHLORIDE SOLUTION 10 G/L, 14994
| 7487-94-7
7732-18-5 |
|
NITRATE NITROGEN STD SOLN 10.0 +/- 0.1 MG/L AS N, 307
| 7757-79-1
7732-18-5 |
|
SODIUM ARSENITE SOLUTION APHA 5 G/L, 1047
| 7784-46-5
7732-18-5 |
|
THYMOLPHTHALEIN INDICATOR SOLUTION 1 G/1, 21853
| 67-63-0
125-20-2
7732-18-5 |
|
R-134A HFC-134A TETRAFLUOROETHANE
| 811-97-2 |
|
HCFC-141B
| 1717-00-6 |
|
R-23 HFC-23 REFRIGERANT 23
| 75-46-7 |
|
R-114 CFC-114 REFRIGERANT 114
| 76-14-2 |
|
R-113 CFC-113 REFRIGERANT 113
| 76-13-1 |
|
KITS 5633K SERIES
| 5989-27-5
64771-72-8 |
|
KITS 5637K SERIES
| 5989-27-5
64771-72-8 |
|
10ML OMC SCREW LOCK, 10221
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
ORANGE SCRUBBER, 98277
| 8001-97-6
61789-91-1
8006-54-0
26172-55-4
2682-20-4
138-86-3
37311-02-7
1332-09-8
9003-01-4
102-71-6 |
|
SEMI-VOLATILES GC/MS TUNING STANDARD, GCM-150
| 75-09-2
5074-71-5
92-87-5
50-29-3
87-86-5 |
|
PALLADIUM PLATING SOLUTION 1/8 LITER, 30934001
| |
|
PALLADIUM PLATING SOLUTION 1/4 LITER, 30934002
| |
|
PALLADIUM PLATING SOLUTION 1/2 LITER, 30934003
| |
|
PALLADIUM PLATING SOLUTION 1 LITER, 30934004
| |
|
AIR BLOWN ASPHALT
| 8052-42-4 |
|
SODIUM HYDROXIDE 0.1600 +/- 0.0007N, 14377
| 1310-73-2
7732-18-5 |
|
AMMONIA 1, 21064
| 6381-59-5 |
|
AMMONIA 2 (NESSLER METHOD), 21065
| 7783-33-7
1310-66-3 |
|
|