===================== Product Identification =====================
MSDS NAME:LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A
NIIN:00-273-8707
MSDS Number: BJQQQ
=== Responsible Party ===
Company:VIMASCO CORPORATION
Box:516
City:NITRO
State:WV
ZIP:25143
Country:US
Info Phone Num:304-755-3328
Emergency Phone Num:304-755-3328
Preparer's Name:JOHN TIDQUIST
CAGE:DO737
=== Contractor Identification ===
Company:VIMASCO CORP
Box:516
City:NITRO
State:WV
ZIP:25143
Country:US
Phone:304-755-3328
CAGE:14947
Company:VIMASCO CORPORATION
Address:PO BOX 516
Box:516
City:NITRO
State:WV
ZIP:25143
Phone:304-755-3328
CAGE:DO737
============= Composition/Information on Ingredients =============
Name:ETHYLENE GLYCOL (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: < 2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:CHLORINATED PARAFFIN
CAS:63449-39-8
Fraction by Wt: < 10%
Other REC Limits:NONE SPECIFIED
Name:VINYL ACETATE (SARA III)
CAS:108-05-4
RTECS #:AK0875000
Fraction by Wt: < 0.2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:10 PPM/15 STEL
ACGIH TLV:10 PPM/15,A3 STEL;93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:HEXYLENE GLYCOL
CAS:107-41-5
RTECS #:SA0810000
Fraction by Wt: < 4%
Other REC Limits:NONE SPECIFIED
OSHA PEL:C 25 PPM
ACGIH TLV:C 25 PPM; 9192
Name:VOC = 45G/LIT 370LB/GL
RTECS #:9999999VO
Other REC Limits:NONE RECOMMENDED
OSHA PEL:NOT RELEVANT
ACGIH TLV:NOT RELEVANT
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ETHYLENE GLYCOL:INGESTION CAUSES
DRUNKENNESS, RAPIDLY PASSING INTO COMA,WITH SERIOUS KIDNEY
INJURY/DEATH.CHLORINATED PARAFFIN:SLIGHT HAZARD WITH THE LIVER AS
TARGET ORGAN.VINYL ACETATE:SLIGHT RESIDUAL MONOMER CAUSE EYE AND
RESPIRATORY IRRITATION.HEXYLENE GLYCOL:LARGE ORAL DOSES PRODUCE
NARCOSIS.
Explanation of Carcinogenicity:VINYL ACETATE HAS BEEN REPORTED TO CAUSE
CANCER IN LABORATORY ANIMALS.
Effects of Overexposure:ETHYLENE GLYCOL:CAUSE SKIN AND EYE
IRRITATION.EXCESSIVE INHALATION CAN CAUSE NASAL AND RESPIRATORY
IRRITATION.HEXYLENE GLYCOL:IN HIGH CONCENTRATIONS, CAN BE AN
IRRITANT TO EYES,SKIN AND MUCOUS MEMBRAN ES.
Medical Cond Aggravated by Exposure:NONE KNOWN
======================= First Aid Measures =======================
First Aid:SKIN:WASH WITH SOAP AND WATER.EYES:FLUSH WITH CLEAN WATER AT
LEAST 15 MINUTES.IF IRRITATION PERSISTS,CONSULT
PHYSICIAN.INHALATION:REMOVE TO FRESH AIR.IF BREATHING IS
DIFFICULT,ADMINISTER OXYGEN.IF IRR ITATION PERSISTS,CONSULT
PHYSICIAN.INGESTION:GIVE TWO GLASSES OF WATER,INDUCE
VOMITING.CONSULT PHYSICIAN OR POISON CONTROL CENTER.NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:PRODUCT WILL NOT BURN UNTIL AFTER BOILED OR
EVAPORATED. FOR DRIED FILM OR RESIDUAL SOLIDS, FULL PROTECTIVE
EQUIPMENT IS RECOMMENDED, INCLUDING SCBA.
Unusual Fire/Explosion Hazard:NONE KNOWN
================== Accidental Release Measures ==================
Spill Release Procedures:MAJOR SPILLS SHOULD BE COLLECTED FOR DISPOSAL.
MINOR SPILLS MAY BE FLUSHED TO SEWER IF REGULATIONS PERMIT. BEFORE
DRYING, PRODUCT MAY BE WASHED AWAY WITH WATER; AFTER DRYING, REMOVE
WITH A PAINT SCRAP ER OR STRONG SOLVENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID BREATHING VAPORS.APPLICATION TO
HOT SURFACES MAY BE IRRITATING.KEEP CONATAINER CLOSED USE ADEQUATE
VENTILATION.STORE INDOORS AT TEMPS OF 45-90F.
Other Precautions:FOR INDUSTRY/PROFESSIONAL USE ONLY.NOT INTENDED FOR
RETAIL SALE OR USE BY INDIVIDUAL CONSUMER.DO NOT REUSE CONTAINER
FOR POTABLE OR EDIBLES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IN RESTRICTED AREAS,USE APPROVED CHEMICAL VAPOR
RESPIRATOR.IN APLICATIONS WHERE MISTS OR SPRAY ARE GENERATED,AVOID
INHALATION OF AIRBORNE PARTICULATES BY USING AN APPROVED RESPIRATOR
WITH ORGANIC VAPO R CARTRIDGE WITH PREFILTER FOR MIST/DUST
Ventilation:GENERAL (MECHANICAL) ROOM VENTILATION IS EXPECTED TO BE
SATISFACTORY.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:GOGGLES, FACESHIELD
Other Protective Equipment:NONE
Work Hygienic Practices:THOROUGHLY CLEANSE HANDS AFTER HANDLING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:25F/-4C
Decomp Temp:Decomp Text:240F,116C
Vapor Density:< THAN AIR
Spec Gravity:1.29
pH:8 - 9
Viscosity:75,000CEN
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:VISCOUS, WHITE OR RED PASTE WITH MILD LATEX ODOR.
Percent Volatiles by Volume:60
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MATERIALS INCOMPATIBLE WITH WATER.
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL YIELD CO,
CO2, HCL, ANTIMONY-OXYCHLORIDE AND FRAGMENTED SHORT-CHAIN
HYDROCARBONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS.
REVIEW HAZARD SECTION OF THIS SHEET BEFORE ATTEMPTING CLEANUP.
EMPTY CONTAINERS ARE NON HAZARDOUS UNDER RCRA AS INDUSTRIAL WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TT-L-32A AM I, TYPE 2 (1136 RED)
| 7758-97-6
7439-92-1
71-36-3
64-17-5
117-81-7
111-76-2
108-10-1
123-86-4
110-19-0
108-88-3
8032-32-4
78-83-1
67-63-0 |
|
TT-V-119D VARNISH, SPAR, BTTV119D
| 64741-41-9
67-63-0 |
|
TT-V-119D, PHENOLIC VARNISH
| |
|
BTR 950 SEALANT (STICK GRADE)
| 54351-63-2
7620-77-1
106-15-0
108-32-7
1592-23-0 |
|
RUBBER TO METAL CEMENT PN 10-352
| |
|
FA-1076
| 78-93-3
108-10-1
109-99-9 |
|
ADHESIVE, LIQUID ANIMAL GLUE
| |
|
PLIOBOND 30
| 1317-65-3
78-93-3 |
|
MAGNESIUM NITRATE
| 13446-18-9 |
|
AMSCO SOLV 1005
| 8052-41-3 |
|
WELD-ON NO.2 COMPONENT B
| 94-36-0 |
|
X-513
| 80-62-6
75-09-2 |
|
WELD-ON 28 COMPONENT-PART A
| 80-62-6
79-41-4 |
|
WELD-ON 28 COMPONENT-PART B
| 94-36-0 |
|
WELD-ON 28 COMPONENT-PART C
| 80-62-6
1300-73-8 |
|
3M EC-776 FUEL RESISTANT COATING
| 108-10-1
9003-35-4
9003-18-3
64-17-5
67-56-1
141-78-6 |
|
ADHESIVE PN X-822
| 8030-30-6
108-88-3 |
|
CASTOR OIL 1 / PALE PRESSED CASTOR OIL
| 8001-79-4 |
|
HATCOL 1280 (MIL-L-7808J)
| 67762-64-5
70693-32-2
68130-53-0
68952-35-2
26603-23-6 |
|
TRA-BOND J1154 RESIN
| 25068-38-6 |
|
TRA-BOND E-2 HARDENER
| 104-78-9 |
|
EPOXY RESIN FE-0004-A
| 112945-52-5
1317-65-3 |
|
EPOXY CURING AGENT FE-0004-B
| 111-40-0
112945-52-5
1317-65-3 |
|
ADHESIVE
| |
|
ADHESIVE-MMM-A-260
| 110-54-3
108-88-3 |
|
LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A
| 107-21-1
63449-39-8
108-05-4
107-41-5 |
|
A36 PART A ADHESIVE RESIN
| |
|
A-36 PART B, ADHESIVE ACTIVATOR
| 7637-07-2 |
|
SC-0846 ADHESIVE
| 110-54-3
108-88-3
67-64-1 |
|
ADHESIVE, TARGET PAPER
| 137-30-4
155-04-4
16893-85-9
155-04-4
16893-85-9 |
|
VINYL COAT COMPOUND, STRIPPABLE, ALUM GRAY
| 598-63-0
7429-90-5
108-10-1
108-88-3
78-93-3 |
|
PRIMER, COATING, P-25
| 1317-80-2
1317-65-3
14807-96-6
8052-41-3 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PARTA-BASE
| 108-88-3
8030-30-6
64742-89-8
64742-52-5
1333-86-4 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PTB-ACCELE
| 1317-36-8
39701-29-6
71011-26-2
107-98-2 |
|
DOD-E-698 BLACK: PRD, B698PD
| 64741-41-9
1333-86-4
14807-96-6
1314-13-2 |
|
DOD-E-699 GRAY DECK ENAMEL, B699PRD
| 64741-41-9
14807-96-6
61790-53-2
14808-60-7
1314-13-2
70084-67-2 |
|
METHYL ALCOHOL
| 67-56-1 |
|
GASKET ADHESIVE 18 OZ NET WT PN 91660
| 75-09-2
74-98-6
75-28-5 |
|
ENAMEL, SEMI-GLOSS, RUST INHIBITING
| 123-86-4
108-88-3
6472-48-9
7758-97-6
1314-41-6 |
|
CLEANING COMPOUND, SOLVENT TRICHLOROTRIFLUOROETHANE
| 76-13-1 |
|
STAY SILV BRAZING FLUXES
| 1332-77-0
11128-29-3
10043-35-3
7789-29-9
7732-18-5 |
|
1681C PART 1 ADHESIVE
| 108-88-3 |
|
1681C PART 2 RUBBER ACCELERATOR
| |
|
AIR
| 7782-44-7
7727-37-9 |
|
THYMOL BLUE INDICATOR
| 76-61-9
7732-18-5 |
|
CALCIUM CHLORIDE PELLETS 90 (BULK)
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
EPOXY/PA/GLOSS BLACK 595B-17038
| 123-86-4
111-76-2
1333-86-4
108-94-1
78-93-3
108-88-3 |
|
CATALYST FOR 443-6 SERIES
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
|