===================== Product Identification =====================
MSDS NAME:PRIMER, COATING, P-25
NIIN:00-282-9414
MSDS Number: BJQQX
=== Responsible Party ===
Company:BAKER SEALANTS & COATINGS COMPANY, INC.
Address:234 SUYDAM AVENUE
Box:B
City:JERSEY CITY
State:NJ
ZIP:07304
Country:US
Info Phone Num:800-356-3129
Emergency Phone Num:201-333-6986
Preparer's Name:CHARLES FRIEDMAN
CAGE:FO833
=== Contractor Identification ===
Company:BAKER SEALANTS & COATINGS CO., INC.
Address:234 SUYDAM AVENUE
Box:B
City:JERSEY CITY
State:NJ
ZIP:07304-3306
Phone:(201) 333-6986
CAGE:FO833
Company:BAKER SEALANTS AND COATINGS CO
Address:234 SUYDAM AVE
Box:City:JERSEY CITY
State:NJ
ZIP:07304-3306
Country:US
Phone:201-333-6986
CAGE:34094
Company:STEVEN INDUSTRIES
Address:39 AVENUE C
Box:8
City:BAYONNE
State:NJ
ZIP:07002-3417
Country:US
Phone:201-437-6501
CAGE:33150
============= Composition/Information on Ingredients =============
Name:TITANIUM DIOXIDE
CAS:1317-80-2
RTECS #:VM2940000
Fraction by Wt: 17.5%
Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 35.0%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192
Name:TALC
CAS:14807-96-6
RTECS #:VV7720000
Fraction by Wt: 9.0%
Name:ALKYD RESIN
Fraction by Wt: 19.0%
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 14.7%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293
Name:VOC: 270
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: VAPORS/MIST CAUSES STINGING,
TEARING, REDNESS. SKIN:PROLONGED/REPEATED CONTACT CAUSES REDNESS,
BURNING, DRYING, CRACKING. INHALATION: IRRITATION-NOSE, THROAT &
SIGNS OF NERVOUS SYSTEM DEPRESSION . INGESTION:
IRRITATION-DIGESTIVE TRACT& SIGNS OF NERVOUS SYSTEM DEPRESSION.
ASPIRATION HAZARD-INFLAMMATION & DAMAGE.
Effects of Overexposure:NERVOUS SYSTEM DEPRESSION: DROWSINESS,
DIZZINESS, LOSS OF COORDINATION AND FATIGUE.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND LUNG
DISORDERS (EG; ASTHMA-LIKE CONDITIONS).
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER-15 MIN. SKIN: REMOVE CONTAM CLOTHES. WASH
W/MILD SOAP & WATER. PERSIST IRRIT-MEDICAL AID. INHALE: VICTIM TO
FRESH AIR. CPR IF VICTIM NOT BREATHING. OXYGEN BY QUALIFIED AID.
IMMEDIA TE MEDICAL ATTN. INGEST: AVOID ASPIRATION-DO NOT INDUCE
VOMIT OR GIVE ANYTHING BY MOUTH/SEVERE LUNG DAMAGE. GET MED AID.
DROWSINESS-VICTIM PLACED ON LEFT W/HEAD DOWN, NOT LEFT ALONE. SEEK
MED AID.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:112F,44C
Lower Limits:0.5
Upper Limits:8
Extinguishing Media:DRY CHEMICAL, CO2 OR FOAM.
Fire Fighting Procedures:USE SCBA FOR FIRE FIGHTERS. WATER SPRAY IS
USEFUL IN MINIMIZING VAPORS & COOLING CONTAINERS EXPOSED TO HEAT &
FLAME. DO NOT SPREAD BURNING LIQUID WITH WATER.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS COMBUSTIBLE AND MAY BE
IGNITED BY HEAT OR FLAME. THIS MATERIAL WILL BURN, BUT WILL NOT
IGNITE READILY.
================== Accidental Release Measures ==================
Spill Release Procedures:STAY UPWIND & AWAY FROM SPILL. KEEP IGNITE
SOURCES FROM SPILL. FOR INDOORS, VENTILATE AREA. KEEP OUT OF
DRAINS/SEWERS/WATERWAYS. USE SAND-OTHER INERT MATERIAL TO DAM &
CONTAIN SPILL. DO NOT FLUSH AREA WITH WATER. CONTACT PROPER
AUTHORITIES.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP TIGHTLY CLOSED, AWAY FROM IGNITE
SOURCES, IN A COOL, DRY PLACE. USE/STORE W/ADEQUATE VENT. "EMPTY"
CONTAINERS RETAIN RESIDUE & CAN BE DANGEROUS.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND OR EXPOSE SUCH CONTAINERS TO IGNITE SOURCES-MAY EXPLODE.
COMPLETELY DRAIN, PROPERLY BUNGE & PROMPTLY SHIP EMPTY "DRUMS" TO
SUPPLIER. AVOID INH ALATION OF VAPORS AND PERSONAL CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ADVISED WHEN CONCENTRATIONS EXCEED ESTABLISHED
EXPOSURE LIMITS. DEPENDING ON THE AIRBORNE CONCENTRATION, USE A
RESPIRATOR OR GAS MASK WITH APPROPRIATE CARTRIDGES AND CANNISTERS
(NIOSH APPROVED, IF AVA ILABLE) OR SUPPLIED AIR EQUIPMENT.
Ventilation:VENTILATION TO MAINTAIN AIRBORNE CONCENTRATION BELOW
EXPOSURE LIMITS. USE EXPLOSIVE PROOF EQUIPMENT WHERE NEEDED.
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:APPROVED EYE PROTECTION IS RECOMMENDED.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:3MMHG @68F
Vapor Density:3.9
Spec Gravity:1.61
Viscosity:75-90 KU
Evaporation Rate & Reference:.13 (BUAC = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:PAINT, PETROLEUM SPIRITS ODOR
Percent Volatiles by Volume:32
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:MAY GIVE OFF CARBON MONOXIDE WHEN BURNED.
Hazardous Decomposition Products:COMBUSTION MAY YIELD CARBON MONOXIDE
AND/OR CARBON DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
COUNTY, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TT-L-32A AM I, TYPE 2 (1136 RED)
| 7758-97-6
7439-92-1
71-36-3
64-17-5
117-81-7
111-76-2
108-10-1
123-86-4
110-19-0
108-88-3
8032-32-4
78-83-1
67-63-0 |
|
TT-V-119D VARNISH, SPAR, BTTV119D
| 64741-41-9
67-63-0 |
|
TT-V-119D, PHENOLIC VARNISH
| |
|
BTR 950 SEALANT (STICK GRADE)
| 54351-63-2
7620-77-1
106-15-0
108-32-7
1592-23-0 |
|
RUBBER TO METAL CEMENT PN 10-352
| |
|
FA-1076
| 78-93-3
108-10-1
109-99-9 |
|
ADHESIVE, LIQUID ANIMAL GLUE
| |
|
PLIOBOND 30
| 1317-65-3
78-93-3 |
|
MAGNESIUM NITRATE
| 13446-18-9 |
|
AMSCO SOLV 1005
| 8052-41-3 |
|
WELD-ON NO.2 COMPONENT B
| 94-36-0 |
|
X-513
| 80-62-6
75-09-2 |
|
WELD-ON 28 COMPONENT-PART A
| 80-62-6
79-41-4 |
|
WELD-ON 28 COMPONENT-PART B
| 94-36-0 |
|
WELD-ON 28 COMPONENT-PART C
| 80-62-6
1300-73-8 |
|
3M EC-776 FUEL RESISTANT COATING
| 108-10-1
9003-35-4
9003-18-3
64-17-5
67-56-1
141-78-6 |
|
ADHESIVE PN X-822
| 8030-30-6
108-88-3 |
|
CASTOR OIL 1 / PALE PRESSED CASTOR OIL
| 8001-79-4 |
|
HATCOL 1280 (MIL-L-7808J)
| 67762-64-5
70693-32-2
68130-53-0
68952-35-2
26603-23-6 |
|
TRA-BOND J1154 RESIN
| 25068-38-6 |
|
TRA-BOND E-2 HARDENER
| 104-78-9 |
|
EPOXY RESIN FE-0004-A
| 112945-52-5
1317-65-3 |
|
EPOXY CURING AGENT FE-0004-B
| 111-40-0
112945-52-5
1317-65-3 |
|
ADHESIVE
| |
|
ADHESIVE-MMM-A-260
| 110-54-3
108-88-3 |
|
LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A
| 107-21-1
63449-39-8
108-05-4
107-41-5 |
|
A36 PART A ADHESIVE RESIN
| |
|
A-36 PART B, ADHESIVE ACTIVATOR
| 7637-07-2 |
|
SC-0846 ADHESIVE
| 110-54-3
108-88-3
67-64-1 |
|
ADHESIVE, TARGET PAPER
| 137-30-4
155-04-4
16893-85-9
155-04-4
16893-85-9 |
|
VINYL COAT COMPOUND, STRIPPABLE, ALUM GRAY
| 598-63-0
7429-90-5
108-10-1
108-88-3
78-93-3 |
|
PRIMER, COATING, P-25
| 1317-80-2
1317-65-3
14807-96-6
8052-41-3 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PARTA-BASE
| 108-88-3
8030-30-6
64742-89-8
64742-52-5
1333-86-4 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PTB-ACCELE
| 1317-36-8
39701-29-6
71011-26-2
107-98-2 |
|
DOD-E-698 BLACK: PRD, B698PD
| 64741-41-9
1333-86-4
14807-96-6
1314-13-2 |
|
DOD-E-699 GRAY DECK ENAMEL, B699PRD
| 64741-41-9
14807-96-6
61790-53-2
14808-60-7
1314-13-2
70084-67-2 |
|
METHYL ALCOHOL
| 67-56-1 |
|
GASKET ADHESIVE 18 OZ NET WT PN 91660
| 75-09-2
74-98-6
75-28-5 |
|
ENAMEL, SEMI-GLOSS, RUST INHIBITING
| 123-86-4
108-88-3
6472-48-9
7758-97-6
1314-41-6 |
|
CLEANING COMPOUND, SOLVENT TRICHLOROTRIFLUOROETHANE
| 76-13-1 |
|
STAY SILV BRAZING FLUXES
| 1332-77-0
11128-29-3
10043-35-3
7789-29-9
7732-18-5 |
|
1681C PART 1 ADHESIVE
| 108-88-3 |
|
1681C PART 2 RUBBER ACCELERATOR
| |
|
AIR
| 7782-44-7
7727-37-9 |
|
THYMOL BLUE INDICATOR
| 76-61-9
7732-18-5 |
|
CALCIUM CHLORIDE PELLETS 90 (BULK)
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
EPOXY/PA/GLOSS BLACK 595B-17038
| 123-86-4
111-76-2
1333-86-4
108-94-1
78-93-3
108-88-3 |
|
CATALYST FOR 443-6 SERIES
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
|