===================== Product Identification =====================
MSDS NAME:ENAMEL, SEMI-GLOSS, RUST INHIBITING
NIIN:00-297-2105
MSDS Number: BJQRH
=== Responsible Party ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Info Phone Num:201-245-1111
Emergency Phone Num:800-924-9300
Preparer's Name:FRED ARMSTRONG
CAGE:33832
=== Contractor Identification ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:201-245-1111
CAGE:33832
============= Composition/Information on Ingredients =============
Name:N-BUTYL ACETATE (SARA III)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 11%
Other REC Limits:NONE SPECIFIED
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200STEL;9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 7%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ALPHATIC NAPTHA
CAS:6472-48-9
Fraction by Wt: 22%
Other REC Limits:NONE SPECIFIED
OSHA PEL:300 PPM
ACGIH TLV:300 PPM
Name:LEAD CHROMATE (AS PB CRO4)
CAS:7758-97-6
RTECS #:GB2975000
Fraction by Wt: 13.27%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.05 MG/M3
ACGIH TLV:0.05 MG/M3
Name:LEAD OXIDE (AS PBO & PBO3)
CAS:1314-41-6
Fraction by Wt: 5.74%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.05 MG/M3
ACGIH TLV:0.05 MG/M3
Name:LEAD DRIER (AS PB)
Fraction by Wt: 0.13%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.05 MG/M3
ACGIH TLV:0.05 MG/M3
Name:VOC= 491 GRAMS/LITER OR 4.09 LBS/GAL
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:NAUSEA, HEADACHE, DIZZINESS CAUSED BY
OVER INHALATION. LEAD POISONING.
Explanation of Carcinogenicity:CARCINOGEN (MATERIAL SOLIDS CONTAIN LEAD
CHROMATE).
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MIN OR UNTIL IRRITATION SUBSIDES. IF
IRRITATION PERSISTS CALL A PHYSICIAN. SKIN: REMOVE CONTAMINATED
CLOTHING AND WASH THOROUGHLY WITH SOAP AND WATER. INHALATION: IF
OVERCOME BY VAPORS, REMOVE TO FRESH AIR, CALL A PHYSICIAN.
INGESTION: DO NOT INDUCE VOMITING, CALL A PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:55.0F,12.8C
Autoignition Temp:Autoignition Temp Text:867F
Lower Limits:1.0
Upper Limits:7.6
Extinguishing Media:CARBON DIOXIDE, FOAM, WATER FOG, DRY CHEMICAL.
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING EQUIPMENT. COOL
ENCLOSED CONTAINERS WITH WATER SPRAY, AVOID BREATHING VAPOR OF
FUMES.
Unusual Fire/Explosion Hazard:IF LEAK OR SPILL HAS IGNITED, USE WATER
SPRAY TO DISPERSE THE VAPORS FROM FIRE FIGHTERS.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE IGNITION SOURCES. KEEP FROM HEAT,
SPARKS & OPEN FLAME. ADD ABSORBENT (SAND, EARTH, SAWDUST) TO SPILL.
VENTILATE AREA (OPEN WINDOWS, DOORS) IF LARGE SPILL KEEP PRODUCT
FROM ENTERING SEWERS & WAT ERCOURSES BY DIKING. ADVISE
AUTHORITIESIF NEED TO
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES, KEEP
IN COOL, DRY, WELL VENTILATED AREAS. AVOID DIRECT SUNLIGHT AND
EXTREME TEMPERATURES-HOT OR COLD.
Other Precautions:AVOID EYE, SKIN CONTACT, INHALATION, INGESTION OF
MISTS, SPRAY OR VAPORS. AVOID BREATHING SANDING OR BLASTING DUST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE HYDROCARBON VAPOR CANISTER OR SUPPLIED AIR
RESPIRATORY IN CONFINED AREA.
Ventilation:LOCAL EXHAUST, FACE VELOCITY 60FPM SPECIAL-USE ONLY WITH
ADEQUATE VENTILATION.MECHANICAL- USE EXPLOSION PROOF EQUIPMENT.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:SPLASH GOGGLES OR FACE SHIELD.
Other Protective Equipment:CHEMICAL RESISTANT APRON OR CLOTHING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:308F,153C
Melt/Freeze Pt:M.P/F.P Text:0F,-18C
Decomp Temp:Decomp Text:600F,316C
Vapor Pres:15 @ 68F
Vapor Density:4.8
Spec Gravity:1.26
Viscosity:75-200 @ 77F
Evaporation Rate & Reference:1.2 BUTYL ACETATE=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:ARMY OLIVE DRAB LIQUID WITH LACQUER ODOR.
Percent Volatiles by Volume:63.5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
CAN REACT WITH OXIDIZING MATERIAL WHEN HEATED TO DECOMPOSITION.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE DISPOSAL
REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVED DISPOSAL
SITE OR FACILITY. DISPOSE IN CONFORMITY WITH STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TT-L-32A AM I, TYPE 2 (1136 RED)
| 7758-97-6
7439-92-1
71-36-3
64-17-5
117-81-7
111-76-2
108-10-1
123-86-4
110-19-0
108-88-3
8032-32-4
78-83-1
67-63-0 |
|
TT-V-119D VARNISH, SPAR, BTTV119D
| 64741-41-9
67-63-0 |
|
TT-V-119D, PHENOLIC VARNISH
| |
|
BTR 950 SEALANT (STICK GRADE)
| 54351-63-2
7620-77-1
106-15-0
108-32-7
1592-23-0 |
|
RUBBER TO METAL CEMENT PN 10-352
| |
|
FA-1076
| 78-93-3
108-10-1
109-99-9 |
|
ADHESIVE, LIQUID ANIMAL GLUE
| |
|
PLIOBOND 30
| 1317-65-3
78-93-3 |
|
MAGNESIUM NITRATE
| 13446-18-9 |
|
AMSCO SOLV 1005
| 8052-41-3 |
|
WELD-ON NO.2 COMPONENT B
| 94-36-0 |
|
X-513
| 80-62-6
75-09-2 |
|
WELD-ON 28 COMPONENT-PART A
| 80-62-6
79-41-4 |
|
WELD-ON 28 COMPONENT-PART B
| 94-36-0 |
|
WELD-ON 28 COMPONENT-PART C
| 80-62-6
1300-73-8 |
|
3M EC-776 FUEL RESISTANT COATING
| 108-10-1
9003-35-4
9003-18-3
64-17-5
67-56-1
141-78-6 |
|
ADHESIVE PN X-822
| 8030-30-6
108-88-3 |
|
CASTOR OIL 1 / PALE PRESSED CASTOR OIL
| 8001-79-4 |
|
HATCOL 1280 (MIL-L-7808J)
| 67762-64-5
70693-32-2
68130-53-0
68952-35-2
26603-23-6 |
|
TRA-BOND J1154 RESIN
| 25068-38-6 |
|
TRA-BOND E-2 HARDENER
| 104-78-9 |
|
EPOXY RESIN FE-0004-A
| 112945-52-5
1317-65-3 |
|
EPOXY CURING AGENT FE-0004-B
| 111-40-0
112945-52-5
1317-65-3 |
|
ADHESIVE
| |
|
ADHESIVE-MMM-A-260
| 110-54-3
108-88-3 |
|
LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A
| 107-21-1
63449-39-8
108-05-4
107-41-5 |
|
A36 PART A ADHESIVE RESIN
| |
|
A-36 PART B, ADHESIVE ACTIVATOR
| 7637-07-2 |
|
SC-0846 ADHESIVE
| 110-54-3
108-88-3
67-64-1 |
|
ADHESIVE, TARGET PAPER
| 137-30-4
155-04-4
16893-85-9
155-04-4
16893-85-9 |
|
VINYL COAT COMPOUND, STRIPPABLE, ALUM GRAY
| 598-63-0
7429-90-5
108-10-1
108-88-3
78-93-3 |
|
PRIMER, COATING, P-25
| 1317-80-2
1317-65-3
14807-96-6
8052-41-3 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PARTA-BASE
| 108-88-3
8030-30-6
64742-89-8
64742-52-5
1333-86-4 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PTB-ACCELE
| 1317-36-8
39701-29-6
71011-26-2
107-98-2 |
|
DOD-E-698 BLACK: PRD, B698PD
| 64741-41-9
1333-86-4
14807-96-6
1314-13-2 |
|
DOD-E-699 GRAY DECK ENAMEL, B699PRD
| 64741-41-9
14807-96-6
61790-53-2
14808-60-7
1314-13-2
70084-67-2 |
|
METHYL ALCOHOL
| 67-56-1 |
|
GASKET ADHESIVE 18 OZ NET WT PN 91660
| 75-09-2
74-98-6
75-28-5 |
|
ENAMEL, SEMI-GLOSS, RUST INHIBITING
| 123-86-4
108-88-3
6472-48-9
7758-97-6
1314-41-6 |
|
CLEANING COMPOUND, SOLVENT TRICHLOROTRIFLUOROETHANE
| 76-13-1 |
|
STAY SILV BRAZING FLUXES
| 1332-77-0
11128-29-3
10043-35-3
7789-29-9
7732-18-5 |
|
1681C PART 1 ADHESIVE
| 108-88-3 |
|
1681C PART 2 RUBBER ACCELERATOR
| |
|
AIR
| 7782-44-7
7727-37-9 |
|
THYMOL BLUE INDICATOR
| 76-61-9
7732-18-5 |
|
CALCIUM CHLORIDE PELLETS 90 (BULK)
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
EPOXY/PA/GLOSS BLACK 595B-17038
| 123-86-4
111-76-2
1333-86-4
108-94-1
78-93-3
108-88-3 |
|
CATALYST FOR 443-6 SERIES
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
|