===================== Product Identification =====================
MSDS NAME:EPOXY/PA/GLOSS BLACK 595B-17038
NIIN:00-432-7130
Kit Part:Y
MSDS Number: BJQRR
=== Responsible Party ===
Company:AKZO COATINGS INC., AEROSPACE FINISHES DIV
Address:434 W. MEATS AVE
City:ORANGE
State:CA
ZIP:92665
Country:US
Info Phone Num:313-637-0400
Emergency Phone Num:800-424-9300 OR 313-855-7313
Preparer's Name:CHARLES L. GRUBBS
CAGE:98502
=== Contractor Identification ===
Company:AKZO COATINGS INC
Address:434 W. MEATS STREET
Box:City:ORANGE
State:CA
ZIP:92661
Country:US
Phone:714-637-1750; CHEMTREC 800-424-9300
CAGE:98502
============= Composition/Information on Ingredients =============
Name:N-BUTYL ACETATE (SARA III)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 5-20%
Other REC Limits:NONE SPECIFIED
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200STEL;9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 3.1%
Other REC Limits:SKIN
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192
Name:CYCLOHEXANONE (SARA III)
CAS:108-94-1
RTECS #:GW1050000
Fraction by Wt: < 5%
Other REC Limits:SKIN
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 12.6%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 13.8%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: NASAL AND RESPIRATORY
IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, HEADACHE, NAUSEA,
VOMITING, UNCONSCIOUSNESS, ASPHYXIATION. EYE: SEVERE IRRITATION,
REDNESS, TEARING, BLURRED VISION AND SENS ATION OF SEEING HALOS
AROUND LIGHTS. EYE BURNS, CORNEAL INJURY. SKIN: EXTRACTION OF
NATURAL OILS & DERMITITIS. INGEST: *
Effects of Overexposure:*MODERATELY TOXIC, COUGHING, HEADACHE, NAUSEA
AND VOMITING, WEAKNESS. GASTROINTESTINAL IRRITATION. ASPIRATION OF
MATERIAL INTO THE LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE
FATAL. OVEREXPOSURE MAY RESULT IN DAMAGE TO THE BLOOD, KIDNEYS,
LIVER, AND/OR BONE MARROW. IRRITANT AND DEPRESSANT FOR CENTRAL
NERVOUS SYS.
Medical Cond Aggravated by Exposure:REPORTS HAVE ASSOCIATED REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY CONCENTRATING
AND INHALING MAY BE HARMFUL/FATAL.
======================= First Aid Measures =======================
First Aid:INHALATION: MOVE TO FRESH AIR. GIVE ARTIFICAL RESPIRATION IF
NECESSARY. SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH WATER
FOR AT LEAST 15 MIN, CONSULT A PHYSICIAN. INGESTION: DRINK ONE OR
TWO GLAS SES OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT
SYMPTOMATICALLY.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:23.0F,-5.0C
Lower Limits:1.1
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. WATER SHOULD BE USED
TO COOL CONTAINERS EXPOSED TO FIRE. FIRE FIGHTERS SHOULD WEAR
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DURING EMERGENCY CONDITIONS OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE CONTAINER AWAY FROM
SUN/HEAT/IGNITE SOURCES. KEEP CONTAINER CLOSED. USE APPROVED
BONDING & GROUNDING PROCEDURES. PREVENT LEAKS-KEEP CONTAINERS**
Other Precautions:**UPRIGHT. DO NOT USE PRESSURE TO EMPTY-DRUM IS NOT A
PRESSURE VESSEL. AVOID BREATHING SANDING DUST. DO NOT WELD OR FLAME
CUT AN EMPTY DRUM. DO NOT HANDLE UNTIL THE SAFETY PRECAUTIONS HAVE
BEEN READ A ND UNDERSTOOD.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR DEVICE. SEE
YOUR SAFETY EQUIPMENT SUPPLIER FOR EVALUATION AND RECOMMENDATION.
IN CONFINED AREAS USE NIOSH/MSHA APPROVED AIRLINE RESPIRATOR OR
HOOD.
Ventilation:PROVIDE VENTILATION TO KEEP VAPOR CONCENTRATION BELOW TLV &
LEL. BAKING FINISHES: EXHAUST VAPORS EMITTED ON HEATING.
Protective Gloves:REQUIRED FOR PROLONGED/REPEATED CONTACT.
Eye Protection:SAFETY EYEWEAR TO PROTECT FROM SPLASHES.
Other Protective Equipment:EYE BATH AND SHOWER SHOULD BE AVAILABLE. USE
CHEMICAL RESISTANT APRON, BOOTS OR OTHER CLOTHING IF NECESSARY.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING, OR USING
WASHROOM.
Supplemental Safety and Health
REMOVE DECOMPOSITION PRODUCTS FORMED DURING WELDING OR FLAME CUTTING OF
SURFACES COATED WITH THIS PRODUCT.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:175 TO 343F
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:56.5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SMOKE, OXIDES OF NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE IN AN APPROVED FACILITY, DO NOT
INCINERATE CLOSED CONTAINERS. DISPOSE OF IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL POLLUTION CONTROL REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TT-L-32A AM I, TYPE 2 (1136 RED)
| 7758-97-6
7439-92-1
71-36-3
64-17-5
117-81-7
111-76-2
108-10-1
123-86-4
110-19-0
108-88-3
8032-32-4
78-83-1
67-63-0 |
|
TT-V-119D VARNISH, SPAR, BTTV119D
| 64741-41-9
67-63-0 |
|
TT-V-119D, PHENOLIC VARNISH
| |
|
BTR 950 SEALANT (STICK GRADE)
| 54351-63-2
7620-77-1
106-15-0
108-32-7
1592-23-0 |
|
RUBBER TO METAL CEMENT PN 10-352
| |
|
FA-1076
| 78-93-3
108-10-1
109-99-9 |
|
ADHESIVE, LIQUID ANIMAL GLUE
| |
|
PLIOBOND 30
| 1317-65-3
78-93-3 |
|
MAGNESIUM NITRATE
| 13446-18-9 |
|
AMSCO SOLV 1005
| 8052-41-3 |
|
WELD-ON NO.2 COMPONENT B
| 94-36-0 |
|
X-513
| 80-62-6
75-09-2 |
|
WELD-ON 28 COMPONENT-PART A
| 80-62-6
79-41-4 |
|
WELD-ON 28 COMPONENT-PART B
| 94-36-0 |
|
WELD-ON 28 COMPONENT-PART C
| 80-62-6
1300-73-8 |
|
3M EC-776 FUEL RESISTANT COATING
| 108-10-1
9003-35-4
9003-18-3
64-17-5
67-56-1
141-78-6 |
|
ADHESIVE PN X-822
| 8030-30-6
108-88-3 |
|
CASTOR OIL 1 / PALE PRESSED CASTOR OIL
| 8001-79-4 |
|
HATCOL 1280 (MIL-L-7808J)
| 67762-64-5
70693-32-2
68130-53-0
68952-35-2
26603-23-6 |
|
TRA-BOND J1154 RESIN
| 25068-38-6 |
|
TRA-BOND E-2 HARDENER
| 104-78-9 |
|
EPOXY RESIN FE-0004-A
| 112945-52-5
1317-65-3 |
|
EPOXY CURING AGENT FE-0004-B
| 111-40-0
112945-52-5
1317-65-3 |
|
ADHESIVE
| |
|
ADHESIVE-MMM-A-260
| 110-54-3
108-88-3 |
|
LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A
| 107-21-1
63449-39-8
108-05-4
107-41-5 |
|
A36 PART A ADHESIVE RESIN
| |
|
A-36 PART B, ADHESIVE ACTIVATOR
| 7637-07-2 |
|
SC-0846 ADHESIVE
| 110-54-3
108-88-3
67-64-1 |
|
ADHESIVE, TARGET PAPER
| 137-30-4
155-04-4
16893-85-9
155-04-4
16893-85-9 |
|
VINYL COAT COMPOUND, STRIPPABLE, ALUM GRAY
| 598-63-0
7429-90-5
108-10-1
108-88-3
78-93-3 |
|
PRIMER, COATING, P-25
| 1317-80-2
1317-65-3
14807-96-6
8052-41-3 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PARTA-BASE
| 108-88-3
8030-30-6
64742-89-8
64742-52-5
1333-86-4 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PTB-ACCELE
| 1317-36-8
39701-29-6
71011-26-2
107-98-2 |
|
DOD-E-698 BLACK: PRD, B698PD
| 64741-41-9
1333-86-4
14807-96-6
1314-13-2 |
|
DOD-E-699 GRAY DECK ENAMEL, B699PRD
| 64741-41-9
14807-96-6
61790-53-2
14808-60-7
1314-13-2
70084-67-2 |
|
METHYL ALCOHOL
| 67-56-1 |
|
GASKET ADHESIVE 18 OZ NET WT PN 91660
| 75-09-2
74-98-6
75-28-5 |
|
ENAMEL, SEMI-GLOSS, RUST INHIBITING
| 123-86-4
108-88-3
6472-48-9
7758-97-6
1314-41-6 |
|
CLEANING COMPOUND, SOLVENT TRICHLOROTRIFLUOROETHANE
| 76-13-1 |
|
STAY SILV BRAZING FLUXES
| 1332-77-0
11128-29-3
10043-35-3
7789-29-9
7732-18-5 |
|
1681C PART 1 ADHESIVE
| 108-88-3 |
|
1681C PART 2 RUBBER ACCELERATOR
| |
|
AIR
| 7782-44-7
7727-37-9 |
|
THYMOL BLUE INDICATOR
| 76-61-9
7732-18-5 |
|
CALCIUM CHLORIDE PELLETS 90 (BULK)
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
EPOXY/PA/GLOSS BLACK 595B-17038
| 123-86-4
111-76-2
1333-86-4
108-94-1
78-93-3
108-88-3 |
|
CATALYST FOR 443-6 SERIES
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
|