Search   
MSDS  : METHYL ALCOHOL
CAS  : 67-56-1
NAME  : methyl alcohol (methanol) (sara iii)
===================== Product Identification =====================

MSDS NAME:METHYL ALCOHOL
NIIN:00-292-9676
MSDS Number: BJQRD
=== Responsible Party ===
Company:CONTINENTAL CHEM CORP. - SEE SUP. DATA
City:TERRE HAUTE
State:IN
Country:US
Emergency Phone Num:SEE SUP. DATA
CAGE:23894
=== Contractor Identification ===
Company:CONTINENTAL CHEM CORP
Address:1330 BEECH STREET
Box:City:TERRE HAUTE
State:IN
Country:US
CAGE:23894

============= Composition/Information on Ingredients =============

Name:METHYL ALCOHOL (METHANOL) (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 100%
Other REC Limits:NONE
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

===================== Hazards Identification =====================

LD50 LC50 Mixture:LD50 ORAL RAT=5628MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SEE SIGNS & SYMPTOMS OF
OVEREXPOSURE CHRONIC:MARKED IMPAIRMENT OF VISION AND ENLARGEMENT OF
THE LIVER HAS BEEN REPORTED.REPEATED OR PROLONGED EXPOSURE MAY
CAUSE SKIN IRRITATION
Effects of Overexposure:EYES:IRRITANT,EYE
LESION;SKIN:DEFATTING,DRYNESS,CRACKING;SKIN ABSORPTION:SYMPTOMS
SIMILAR TO INHALATION;INHALATION:IRRITANT,TOXIC TO NERVOUS SYSTEM &
OPTIC NERVE,HEADACHE,DROWSINESS,NAUSEA,VOMIT,BLURR ED
VISION,BLINDNESS,COMA,DEATH,INGESTION:SYMPTOMS SIMILAR TO
INHALATION,CAN CAUSE BLINDNESS.FATAL DOSE=100-125ML
Medical Cond Aggravated by Exposure:PERSON WITH PRE-EXISTING SKIN

======================= First Aid Measures =======================

Eyes:FLUSH WITH PLENTY OF WATER.SEE DOCTO
IMMEDIATE;SKIN*REMOVE CONTAMINATED CLOTHING.WASH WITH PLENTY SOAP &
WATER IF IRRITATION PERSISTS,SEE DOCTOR;INHALATION:REMOVE TO FRESH
AIR.GIVE CPR/OXYGEN NEE DED.SEE DOCTOR;INGESTION:GIVE 2 GLASSESOF
WATER & INDUCE VOMIT IMMEDIATELY.SEE DOCTOR IMMEDIATELY.NOTHING BY
MOUTH IF UNCONSCIOUS.

===================== Fire Fighting Measures =====================

Flash Point Method:CC
Flash Point:52F(11C)
Lower Limits:6.7
Upper Limits:36
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,ALCOHOL FOAM,CO*2
Fire Fighting Procedures:USE SCBA WITH FULL FACEPIECE & FULL PROTECTIVE
CLOTHING.USE WATER SPRAY TO COOL FIRE EXPOSED CONTAINERS AND TO
DISPERSE UNIGNITED VAPORS.
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR.CAN TRAVE ALONG
GROUND A LONG DISTIANCE AND FLASHBACK.

================== Accidental Release Measures ==================

Spill Release Procedures:REMOVE IGNITION SOURCES.VENTILATE.WEAR
RESPIRATORY PROTECTION & PROTECTIVE CLOTHING.ABSIRB IN INERT
MATERIAL AND PLACE IN APPROPRIATE DISPOSAL CONTAINER.

====================== Handling and Storage ======================

Handling and Storage Precautions:PROTECT AGAINST PHYSICAL
DAMAGE.OUTSIDE OR DETACHED STORAGE PREFERRED.INSIDE STORAGE SHOULD
BE FOR FLAMMABLE LIQUID.SEPARATE FROM OXIDIZING MATERIALS.
Other Precautions:STORAGE & USE AREAS SHOULD BE
NON-SMOKING.SPARKS-PROOF TOO & EXPLOSION-PROOF EQUIPMENT SHOULD BE
USED IN THE STORAGE & HANDLING AREA.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY DEVICE
APPROPIATE FOR EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST TO MAINTAIN BELOW TVL.
Protective Gloves:RUBBER,NEOPRENE.
Eye Protection:GOGGLES (DO NOT WEAR CONTACT LENSES)
Other Protective Equipment:RUBBER BOOTS,APRON OR COVERALLS. EYEWASH
STATION AND SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.REMOVE & LAUNDER
CONTAMINATED CLOTHING.
Supplemental Safety and Health
RECORD PREPARED FROM EXISTING HMIS RECORD FOR THIS PURE CHEMICAL.
CONTINENTAL CHEMICAL IS OUT-OF-BUSINESS.

================== Physical/Chemical Properties ==================

HCC:F5
Boiling Pt:=64.4C, 148.F
Melt/Freeze Pt:=-97.8C, -144.F
Vapor Pres:97
Vapor Density:1.1
Spec Gravity:0.8
Evaporation Rate & Reference:5.9 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,COLORLESS LIQUID.CHARACTERISTIC ODOR.
Percent Volatiles by Volume:100

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS. WILL ATTACK SOME FORMS OF PLASTI
RUBBER,COATING. MAY REACT WITH METALLIC AL TO FORM HAZ GAS.
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAMES.
Hazardous Decomposition Products:CO,CO*2FORMALDHYDE

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSE AS HAZARDOUS WASTE IN A RCA APPROVED
FACILITY.NOT FLUSH TO SEWER.COMPLY WITH ALL APPLICABLE
FEDERAL,STATE & LOCAL ENVIRINMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
TT-L-32A AM I, TYPE 2 (1136 RED) 7758-97-6
7439-92-1
71-36-3
64-17-5
117-81-7
111-76-2
108-10-1
123-86-4
110-19-0
108-88-3
8032-32-4
78-83-1
67-63-0
TT-V-119D VARNISH, SPAR, BTTV119D 64741-41-9
67-63-0
TT-V-119D, PHENOLIC VARNISH
BTR 950 SEALANT (STICK GRADE) 54351-63-2
7620-77-1
106-15-0
108-32-7
1592-23-0
RUBBER TO METAL CEMENT PN 10-352
FA-1076 78-93-3
108-10-1
109-99-9
ADHESIVE, LIQUID ANIMAL GLUE
PLIOBOND 30 1317-65-3
78-93-3
MAGNESIUM NITRATE 13446-18-9
AMSCO SOLV 1005 8052-41-3
WELD-ON NO.2 COMPONENT B 94-36-0
X-513 80-62-6
75-09-2
WELD-ON 28 COMPONENT-PART A 80-62-6
79-41-4
WELD-ON 28 COMPONENT-PART B 94-36-0
WELD-ON 28 COMPONENT-PART C 80-62-6
1300-73-8
3M EC-776 FUEL RESISTANT COATING 108-10-1
9003-35-4
9003-18-3
64-17-5
67-56-1
141-78-6
ADHESIVE PN X-822 8030-30-6
108-88-3
CASTOR OIL 1 / PALE PRESSED CASTOR OIL 8001-79-4
HATCOL 1280 (MIL-L-7808J) 67762-64-5
70693-32-2
68130-53-0
68952-35-2
26603-23-6
TRA-BOND J1154 RESIN 25068-38-6
TRA-BOND E-2 HARDENER 104-78-9
EPOXY RESIN FE-0004-A 112945-52-5
1317-65-3
EPOXY CURING AGENT FE-0004-B 111-40-0
112945-52-5
1317-65-3
ADHESIVE
ADHESIVE-MMM-A-260 110-54-3
108-88-3
LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A 107-21-1
63449-39-8
108-05-4
107-41-5
A36 PART A ADHESIVE RESIN
A-36 PART B, ADHESIVE ACTIVATOR 7637-07-2
SC-0846 ADHESIVE 110-54-3
108-88-3
67-64-1
ADHESIVE, TARGET PAPER 137-30-4
155-04-4
16893-85-9
155-04-4
16893-85-9
VINYL COAT COMPOUND, STRIPPABLE, ALUM GRAY 598-63-0
7429-90-5
108-10-1
108-88-3
78-93-3
PRIMER, COATING, P-25 1317-80-2
1317-65-3
14807-96-6
8052-41-3
RUBBER,SHAFT COV MATL TROWELABLE,PARTA-BASE 108-88-3
8030-30-6
64742-89-8
64742-52-5
1333-86-4
RUBBER,SHAFT COV MATL TROWELABLE,PTB-ACCELE 1317-36-8
39701-29-6
71011-26-2
107-98-2
DOD-E-698 BLACK: PRD, B698PD 64741-41-9
1333-86-4
14807-96-6
1314-13-2
DOD-E-699 GRAY DECK ENAMEL, B699PRD 64741-41-9
14807-96-6
61790-53-2
14808-60-7
1314-13-2
70084-67-2
METHYL ALCOHOL 67-56-1
GASKET ADHESIVE 18 OZ NET WT PN 91660 75-09-2
74-98-6
75-28-5
ENAMEL, SEMI-GLOSS, RUST INHIBITING 123-86-4
108-88-3
6472-48-9
7758-97-6
1314-41-6
CLEANING COMPOUND, SOLVENT TRICHLOROTRIFLUOROETHANE 76-13-1
STAY SILV BRAZING FLUXES 1332-77-0
11128-29-3
10043-35-3
7789-29-9
7732-18-5
1681C PART 1 ADHESIVE 108-88-3
1681C PART 2 RUBBER ACCELERATOR
AIR 7782-44-7
7727-37-9
THYMOL BLUE INDICATOR 76-61-9
7732-18-5
CALCIUM CHLORIDE PELLETS 90 (BULK) 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5
EPOXY/PA/GLOSS BLACK 595B-17038 123-86-4
111-76-2
1333-86-4
108-94-1
78-93-3
108-88-3
CATALYST FOR 443-6 SERIES 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3
340,340BIL PACKING MATERIAL 12001-29-5
340,340BIL PACKING MATERIAL 12001-29-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net