===================== Product Identification =====================
MSDS NAME:TT-V-119D VARNISH, SPAR, BTTV119D
NIIN:00-251-6980
MSDS Number: BJQPJ
=== Responsible Party ===
Company:DAVLIN PAINT CO INC
Box:2308
City:BERKELEY
State:CA
ZIP:94702
Country:US
Info Phone Num:415-848-2863
Emergency Phone Num:415-889-7098
Preparer's Name:PATRICIA SHAW
CAGE:3Z268
=== Contractor Identification ===
Company:DAVLIN PAINT CO INC
Address:700 ALLSTON WAY
Box:2308
City:BERKELEY
State:CA
ZIP:94702
Country:US
Phone:510-848-2863
CAGE:3Z268
============= Composition/Information on Ingredients =============
Name:HYDROCARBON MIXTURE (VAPOR PRESSURE 2.0 MM HG @ 68F)
CAS:64741-41-9
Fraction by Wt: 35%
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Name:ISOPROPYL ALCOHOL (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PETROLEUM HYDROCARBONS AND SYNTHETIC
LUBRICANTS POSE POTENTIAL HEALTH RISKS. CHRONIC EXPOSURE MAY CAUSE
DAMAGE TO THE CENTRAL NERVOUS SYSTEM, RESPIRATORY SYSTEM, LUNGS,
EYES, SKIN, GASTROINTESTINAL TR ACT, LIVER, SPLEEN AND KIDNEYS.
ASPIRATION HAZARD: LIQUID ENTERING THE LUNGS DURING SWALLOWING OR
VOMITING.
Effects of Overexposure:INHALE: DIZZINESS, WEAKNESS, FATIGUE, NAUSEA &
HEADACHE. EYE: TEARING, REDNESS & BLURRED VISION. SKIN: DEFATTING &
DERMATITIS.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMATITIS, NAUSEA.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH EYES WITH WATER FOR AT LEAST 15 MIN, LIFTING
EYELIDS. SKIN: REMOVE CONTAMINATED CLOTHING, WASH WITH SOAP AND
WATER. INHALE: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION OR
ADMINISTER O XYGEN IF NEEDED. INGESTION: GIVE WATER OR MILK TO
DRINK AND GET MEDICAL AID. DO NOT MAKE PERSON VOMIT UNLESS DIRECTED
TO DO SO BY MEDICAL PERSONNEL. GET IMMEDIATE MEDICAL ATTENTION FOR
ANY EMERGENCY.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:93.0F,33.9C
Lower Limits:1.0
Upper Limits:12.0
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:EXTINGRS: FOR NFPA FLAMMABLE LIQUID FIRE.
WATER IS INEFFECTIVE, USE AS FOG FOR COOLING. FIRE EXPOSED PERSONS:
WEAR FULL PROTECTIVE CLOTHES & BREATHING APPARATUS
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLOSIVE MIX W/AIR WHICH CAN
BE IGNITED BY MANY SOURCES. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. ISOLATE FROM IGNITION SOURCES.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL IGNITION SOURCES. VENTILATE THE AREA. PROVIDE APPROPRIATE
PROTECTIVE EQUIPMENT. DIKE AROUND THE SPILL AREA. COVER SPILL WITH
INERT ABSORBENT AND TRANSF ER USING NON-SPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 80F IN CLOSED CONTAINERS.
STORE IN ORIGINAL CONTAINER. AVOID FLAME AND HIGH TEMPERATURES. DO
NOT STORE NEAR OXIDIZING AGENTS OR ACIDS.
Other Precautions:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL A
CONSIDERABLE DISTANCE TO A SOURCE OF IGNITION AND FLASHBACK. DO NOT
TAKE INTERNALLY,AVOID PROLONGED OR REPEATED INHALATION OF HEATED
VAPORS OR SPRAY MIST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED EQUIPMENT WHEN AIRBORN
EXPOSURE LIMITS ARE EXCEEDED. HIGH AIR BORN CONCENTRATIONS MAY
REQUIRE THE USE OF A SUPPLIED AIR RESPIRATOR OR A SELF-CONTAINED
BREATHING APPARATUS. CONSULT RESPIRATOR MANUFACTURER FOR
EQUIPMENT.
Ventilation:SUFFICIENT VENTILATION TO CONTROL EXPOSURE LEVELS BELOW
AIRBORN EXPOSURE LIMITS. EQUIPMENT MUST BE EXPLOSION PROOF.
Protective Gloves:GLOVES THAT PROVIDE A BARRIER FOR SKIN.
Eye Protection:CHEMICAL SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:IMPERMEABLE APRONS AND PROTECTIVE CLOTHING
TO PREVENT REPEATED OR EXTENDED EXPOSURE. HEAD CAPS ARE STRONGLY
RECOMMENDED.
Work Hygienic Practices:AFTER USING WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health
GROUND ALL CONNECTIONS, CONTAINERS, ETC. WHEN POURING OR TRANSFERRING
TO MINIMIZE STATIC ELECTRICITY. AVOID SPONTANEOUS COMBUSTION OF
CONTAMINATED RAGS AND OTHER EASILY IGNITABLE ACCUMULATIONS (SUCH A
S SPRAY BOOTH RESIDUE) BY IMMEDIATE IMMERSION IN WATER.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:180 TO 315F
Vapor Density:> THAN AIR
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT WATER SOLUBLE
Appearance and Odor:CLEAR LIQUID. VEGETABLE OIL, SOLVENT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:RAGS OR ABSORBENTS SOAKED WITH THIS
MATERIAL MAY SPONTANEOUSLY IGNITE IF EXPOSED TO AIR IN CONFINED
SPACES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE AND/OR MONOXIDE, LOW MOLECULAR WEIGHT HYDROCARBONS AND
ORGANIC ACIDS.
==================== Disposal Considerations ====================
Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS AND WATERWAYS.
DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TT-L-32A AM I, TYPE 2 (1136 RED)
| 7758-97-6
7439-92-1
71-36-3
64-17-5
117-81-7
111-76-2
108-10-1
123-86-4
110-19-0
108-88-3
8032-32-4
78-83-1
67-63-0 |
|
TT-V-119D VARNISH, SPAR, BTTV119D
| 64741-41-9
67-63-0 |
|
TT-V-119D, PHENOLIC VARNISH
| |
|
BTR 950 SEALANT (STICK GRADE)
| 54351-63-2
7620-77-1
106-15-0
108-32-7
1592-23-0 |
|
RUBBER TO METAL CEMENT PN 10-352
| |
|
FA-1076
| 78-93-3
108-10-1
109-99-9 |
|
ADHESIVE, LIQUID ANIMAL GLUE
| |
|
PLIOBOND 30
| 1317-65-3
78-93-3 |
|
MAGNESIUM NITRATE
| 13446-18-9 |
|
AMSCO SOLV 1005
| 8052-41-3 |
|
WELD-ON NO.2 COMPONENT B
| 94-36-0 |
|
X-513
| 80-62-6
75-09-2 |
|
WELD-ON 28 COMPONENT-PART A
| 80-62-6
79-41-4 |
|
WELD-ON 28 COMPONENT-PART B
| 94-36-0 |
|
WELD-ON 28 COMPONENT-PART C
| 80-62-6
1300-73-8 |
|
3M EC-776 FUEL RESISTANT COATING
| 108-10-1
9003-35-4
9003-18-3
64-17-5
67-56-1
141-78-6 |
|
ADHESIVE PN X-822
| 8030-30-6
108-88-3 |
|
CASTOR OIL 1 / PALE PRESSED CASTOR OIL
| 8001-79-4 |
|
HATCOL 1280 (MIL-L-7808J)
| 67762-64-5
70693-32-2
68130-53-0
68952-35-2
26603-23-6 |
|
TRA-BOND J1154 RESIN
| 25068-38-6 |
|
TRA-BOND E-2 HARDENER
| 104-78-9 |
|
EPOXY RESIN FE-0004-A
| 112945-52-5
1317-65-3 |
|
EPOXY CURING AGENT FE-0004-B
| 111-40-0
112945-52-5
1317-65-3 |
|
ADHESIVE
| |
|
ADHESIVE-MMM-A-260
| 110-54-3
108-88-3 |
|
LAGGING ADHESIVE&COAT P/N 713 WHITE GRADE A
| 107-21-1
63449-39-8
108-05-4
107-41-5 |
|
A36 PART A ADHESIVE RESIN
| |
|
A-36 PART B, ADHESIVE ACTIVATOR
| 7637-07-2 |
|
SC-0846 ADHESIVE
| 110-54-3
108-88-3
67-64-1 |
|
ADHESIVE, TARGET PAPER
| 137-30-4
155-04-4
16893-85-9
155-04-4
16893-85-9 |
|
VINYL COAT COMPOUND, STRIPPABLE, ALUM GRAY
| 598-63-0
7429-90-5
108-10-1
108-88-3
78-93-3 |
|
PRIMER, COATING, P-25
| 1317-80-2
1317-65-3
14807-96-6
8052-41-3 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PARTA-BASE
| 108-88-3
8030-30-6
64742-89-8
64742-52-5
1333-86-4 |
|
RUBBER,SHAFT COV MATL TROWELABLE,PTB-ACCELE
| 1317-36-8
39701-29-6
71011-26-2
107-98-2 |
|
DOD-E-698 BLACK: PRD, B698PD
| 64741-41-9
1333-86-4
14807-96-6
1314-13-2 |
|
DOD-E-699 GRAY DECK ENAMEL, B699PRD
| 64741-41-9
14807-96-6
61790-53-2
14808-60-7
1314-13-2
70084-67-2 |
|
METHYL ALCOHOL
| 67-56-1 |
|
GASKET ADHESIVE 18 OZ NET WT PN 91660
| 75-09-2
74-98-6
75-28-5 |
|
ENAMEL, SEMI-GLOSS, RUST INHIBITING
| 123-86-4
108-88-3
6472-48-9
7758-97-6
1314-41-6 |
|
CLEANING COMPOUND, SOLVENT TRICHLOROTRIFLUOROETHANE
| 76-13-1 |
|
STAY SILV BRAZING FLUXES
| 1332-77-0
11128-29-3
10043-35-3
7789-29-9
7732-18-5 |
|
1681C PART 1 ADHESIVE
| 108-88-3 |
|
1681C PART 2 RUBBER ACCELERATOR
| |
|
AIR
| 7782-44-7
7727-37-9 |
|
THYMOL BLUE INDICATOR
| 76-61-9
7732-18-5 |
|
CALCIUM CHLORIDE PELLETS 90 (BULK)
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
EPOXY/PA/GLOSS BLACK 595B-17038
| 123-86-4
111-76-2
1333-86-4
108-94-1
78-93-3
108-88-3 |
|
CATALYST FOR 443-6 SERIES
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
340,340BIL PACKING MATERIAL
| 12001-29-5 |
|
|