| MSDS | : | TEFLON PRIMERS (458-500) | | CAS | : | 1330-20-7
112945-52-5
112-34-5
102-71-6 | | NAME | : | xylenes (o-,m-,p- isomers) (sara iii)
octylphenoxypolyethoxyethanol (nonionic surfactant)
first aid proc: call md immed & have names of
ing 7: lung dmg, pulm edema/burns. some vegetation is
ing 8: be given to exhaust locations. ing 2: amorphous
ing 9: may cause eye irrit w/discomfort, tearing/blurred
ing 10: rash. can be absorbed through the skin in harmful
ing 11: overexp may cause eye, nose & throat irrit.
ing 12: cause cns efts such as dizz, hdch, naus & loss of
ing 13: ing 5: overexp may cause eye, nose & throat irrit.
ing 14: dermat. may cause cns efts such as dizz, hdch, naus
ing 15: rptd & prlngd overexp to solv w/perm brain & nerv
ing 16: in lab animals. recurrent overexp may result in
ing 17: in harmful amts. ing 6: causes eye corr & perm
fluoropolymer solids. from eye prot: full lgth fshld to gog
silica gel (amorphous silica)
ethanol,2-(2-butoxyethoxy)-2-(2-butoxy ethoxy) ethanol. vp:
ethanol,2,2',2-nitrolotri- (triethanolamine). vp: 0.01.
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:TEFLON PRIMERS (458-500)
NIIN:00N015181
MSDS Number: BKNPJ
=== Responsible Party ===
Company:E I DUPONT DE NEMOURS & CO
Address:FINISHES & FABRICATED PRODUCTS DEPT
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Info Phone Num:800-441-7515
Emergency Phone Num:800-441-3637;800-424-9300(CHEMTREC)
CAGE:0ERJ7
=== Contractor Identification ===
Company:E I DUPONT DE NEMOURS & CO, INC.
Address:1007 MARKET STREET
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-7515
CAGE:0ERJ7
Company:E.I. DUPONT DE NEMOURS & CO
Address:1007 MARKET STREET
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-7515;800-441-9442
CAGE:18873
============= Composition/Information on Ingredients =============
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:OCTYLPHENOXYPOLYETHOXYETHANOL (NONIONIC SURFACTANT)
Name:FIRST AID PROC: CALL MD IMMED & HAVE NAMES OF INGRED
AVAILABLE. SUPP DATA: - ACGIH). HIGH CONC CAN CAUSE (SEE ING 8)
RTECS #:9999999ZZ
Name:ING 7: LUNG DMG, PULM EDEMA/BURNS. SOME VEGETATION IS
PARTICULARLY SENSITIVE TO DMG BY HF & ATTENTION MUST (SEE ING 9)
RTECS #:9999999ZZ
Name:ING 8: BE GIVEN TO EXHAUST LOCATIONS. ING 2: AMORPHOUS
SILICA: NO KNOWN HAZ W/NORMAL INDUSTRIAL USE. ING 3: (SEE ING 10)
RTECS #:9999999ZZ
Name:ING 9: MAY CAUSE EYE IRRIT W/DISCOMFORT, TEARING/BLURRED
VISION. CONT MAY CAUSE SKIN IRRIT W/DISCOMFORT OR (SEE ING 11)
RTECS #:9999999ZZ
Name:ING 10: RASH. CAN BE ABSORBED THROUGH THE SKIN IN HARMFUL
AMTS. MAY CAUSE ABNORMAL KIDNEY FUNCTION. ING 4: (SEE ING 12)
RTECS #:9999999ZZ
Name:ING 11: OVEREXP MAY CAUSE EYE, NOSE & THROAT IRRIT.
RPTD/PRLNGD LIQ CONT MAY CAUSE SKIN IRRIT & DERMAT. MAY (SEE ING
13)
RTECS #:9999999ZZ
Name:ING 12: CAUSE CNS EFTS SUCH AS DIZZ, HDCH, NAUS & LOSS OF
CONSCIOUSNESS. CAUSES EYE CORR & PERM INJURY. (SEE ING 14)
RTECS #:9999999ZZ
Name:ING 13: ING 5: OVEREXP MAY CAUSE EYE, NOSE & THROAT IRRIT.
RPTD/PRLNGD LIQ CONT MAY CAUSE SKIN IRRIT AND (SEE ING 15)
RTECS #:9999999ZZ
Name:ING 14: DERMAT. MAY CAUSE CNS EFTS SUCH AS DIZZ, HDCH, NAUS
& LOSS OF CONSCIOUSNESS. RPTS HAVE ASSOCIATED (SEE ING 16)
RTECS #:9999999ZZ
Name:ING 15: RPTD & PRLNGD OVEREXP TO SOLV W/PERM BRAIN & NERV
SYS DMG. HIGH CONC HAVE CAUSED EMBRYOTOXIC EFTS (SEE ING 17)
RTECS #:9999999ZZ
Name:ING 16: IN LAB ANIMALS. RECURRENT OVEREXP MAY RESULT IN
LIVER & KIDNEY INJURY. CAN BE ABSORBED THRU SKIN (SEE ING 18)
RTECS #:9999999ZZ
Name:ING 17: IN HARMFUL AMTS. ING 6: CAUSES EYE CORR & PERM
INJURY. CONT MAY CAUSE SKIN IRRIT W/DISCOMFORT/RASH.
RTECS #:9999999ZZ
Name:FLUOROPOLYMER SOLIDS. FROM EYE PROT: FULL LGTH FSHLD TO GOG
Name:SILICA GEL (AMORPHOUS SILICA)
CAS:112945-52-5
RTECS #:VV7310000
Other REC Limits:15 MG/M3 (MFR)
OSHA PEL:6 MG/M3
ACGIH TLV:10.0 MG/M3 TDUST
Name:ETHANOL,2-(2-BUTOXYETHOXY)-2-(2-BUTOXY ETHOXY) ETHANOL. VP:
0.01.
CAS:112-34-5
RTECS #:KJ9100000
OSHA PEL:5.0 PPM (MFR)
ACGIH TLV:5.0 PPM (MFR)
Name:ETHANOL,2,2',2-NITROLOTRI- (TRIETHANOLAMINE). VP: 0.01.
CAS:102-71-6
RTECS #:KL9275000
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: NORMALLY NOT A HAZARD. THESE
PRODUCTS CONTAIN SM AMTS OF SOLV AS DESCRIBED BELOW. SKIN/EYE: MAY
CAUSE IRRIT/BURNING OF EYES. RPTD/PRLNG LIQ CONT MAY CAUSE SKIN
IRRIT W/DISCOMFORT & DERMAT. OTHE R POTENTIAL HAZ (OF THE PURE
MATLS) INCLUDE: ING 1: EXPOS TO TEFLON DECOMP PRODS CAN CREATE (SEE
EFTS OF OVEREXP)
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:HLTH HAZ: INFLUENZA-LIKE SYMPTOMS, COMMONLY
REFERRED TO AS POLYMER FUME FEVER. THESE SYMPTOMS DO NOT ORDINARILY
OCCUR UNTIL SEV HRS AFTER EXPOS & PASS WITHIN 36-48 HRS. EFTS ARE
NOT CUMULATIVE. EXPOS USUALLY RESULTS FROM SMOKING TOBACCO
ORCIGARETTES CONTAM W/THE FLUOROCARBON DURING HANDLING OR FROM
BRTHG (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL: IF AFFECTED BY INHAL OF VAP/SPRAY MIST, REMOVE TO
FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP, PREF MOUTH-TO-MOUTH. IF
BRTHG DIFFICULTY PERSISTS, OR OCCURS LATER, CALL MD. SKIN/EYE: IN
CASE OF EYE CONT, IMMED FLUSH W/PLENTY OF WATER FORAT LEAST 15
MIN, CALL MD. IN CASE OF SKIN CONT, WASH W/SOAP & WATER. IF IRRIT
OCCURS, CALL MD. INGEST: GI DISTRESS. IN THE UNLIKELY EVENT OF
INGEST, (SEE ING 7)
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL PROT
EQUIP . WATER FROM FOG NOZZLES MAY BE USED TO COOL CLOSED CNTNRS TO
PREVENT PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard:HYDROGEN FLUORIDE IS RELEASED DURING A
FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. REMOVE SOURCES OF IGNITION.
AVOID SKIN CONTACT AND BREATHING OF VAPOR. CONFINE AND REMOVE WITH
INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:OBSERVE LABEL PREC. KEEP AWAY FROM
HEAT, SPARKS & FLAME. CLOSE CNTNR AFTER EACH USE. GROUND CNTNRS
WHEN POURING. DO NOT STORE ABOVE 120F.
Other Precautions:EXPLOSIVE RXN MAY OCCUR ABOVE 796F W/FINELY DIVIDED
FLUOROCARBON & METAL POWDER (ALUMINUM OR MAGNESIUM). OPERATIONS
SUCH AS GRINDING, BUFFING OR GRIT BLASTING MAY GENERATE SUCH
MIXTURES. KEEP WET. USE ADEQUATE VENTILATION TO CONTROL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:DO NOT BREATHE VAP/MISTS. WEAR A PROPERLY FITTED
NIOSH/MSHA APPRVD VAPOR/PARTICULATE RESP FOR USE WITH PAINTS DURING
APPLICATN & UNTIL ALL VAPS & SPRAY MIST ARE EXHAUSTED. FOLLOW RESP
MFR DIRECTIONS F OR RESP USE.
Ventilation:PROVIDE SUFFICIENT VENTILATION IN VOLUME & PATTERN TO KEEP
CONTAMINANTS BELOW APPLICABLE OSHA REQUIREMENTS.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEM WORKERS GOG. MAY ADD (SEE ING 1)
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING AND SMOKING.
Supplemental Safety and Health
% VOLAT: 51.1-53.7%. EFTS OF OVEREXP: VAPS EMITTED DURING BAKING. DO
NOT EXCEED REC BAKING TEMP. BAKING OVENS MUST BE PROPERLY VENT. AT
TEMP ABOVE 400C (750F) SM AMTS OF HYDROGEN FLUORIDE CAN BE EVOLV
ED; AMTS INCREASE AS TEMP INCREASES. HYDROGEN FLUORIDE IS TOXIC &
CAN CAUSE SKIN & EYE IRRIT (3 PPM CEILING (SEE ING 7)
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF HEAVY METALS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DO NOT ALLOW MATL TO CONTAMINATE GROUND WATER
SYSTEMS. SEND TO HAZ WASTE WATER TREATMENT PLANT OR INCINERATE
ABSORBED MATL IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REQUIREMENTS. DO NOT INCINERATE I N CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|