===================== Product Identification =====================
MSDS NAME:EZ ENTRY ENCAPSULANT PART B, 845826239
NIIN:00N015276
Kit Part:Y
MSDS Number: BKNRP
=== Responsible Party ===
Company:AT&T
Address:ONE OAK WAY
City:BERKELEY HEIGHTS
State:NJ
ZIP:07922-2727
Country:US
Info Phone Num:201-771-4644
Emergency Phone Num:201-736-6066
CAGE:0DHY0
=== Contractor Identification ===
Company:AT&T
Address:ONE OAK WAY
Box:City:BERKELEY HEIGHTS
State:NJ
ZIP:07922-2727
Country:US
Phone:201-771-4644
CAGE:0DHY0
============= Composition/Information on Ingredients =============
Name:BIS(2-ETHYLHEXYL) ADIPATE (SARA III)
CAS:103-23-1
RTECS #:AU9700000
Fraction by Wt: <10%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAN CAUSE MUCOUS MEMBRANE IRRITATION
OF THE EYES, NOSE AND RESPIRATORY TRACT. PROLONGED SKIN CONTACT MAY
CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH W/LRG AMTS OF WATER FOR AT LEAST 15 MIN. IF IRRIT
PERSISTS, SEE MD. SKIN: WASH AFFECTED AREAS W/SOAP & WATER. REMOVE
CONTAMD CLTHG & LAUNDER BEFORE REUSE. IF IRRIT PERSISTS, SEE MD.
INHAL: REMOVE TO FRESH AIR. IF BRTHG STOPPED, GIVE ARTF RESP. IF
BRTHG DFCLT, GIVE OXYGEN. SEE MD. INGEST: INDUCE VOMIT. CALL MD.
===================== Fire Fighting Measures =====================
Flash Point:370F,188C
Extinguishing Media:WATER, DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:FOR LRG SPILLS, COVER WITH ABSORBENT MATL AND
SHOVEL INTO CONTAINER. TREAT WITH DILUTED AMMONIA SOLUTION AND
LEAVE VENTILATED FOR 24 HOURS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONT W/SKIN, EYES & CLTHG. KEEP
AWAY FROM HEAT AND EXTREMELY WARM STORAGE AREAS. PROTECT FROM
MOISTURE. STORE IN TIGHTLY CLSD (SEE OTHER PREC)
Other Precautions:HNDLG/STOR PREC: CNTNRS. STORE AT ROOM TEMPS ABOVE
60F AND BELOW 90F.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. IF
TLV FOR MDI IS EXCEEDED, USE NIOSH/MSHA APPROVED SCBA.
Ventilation:LOCAL EXHST VENT IS PREF. VENT MUST BE SUFFICIENT TO
MAINTAIN AIRBORNE CONC BELOW THE TLV(S) AND PEL(S) LISTED IN INGRE.
Protective Gloves:NITRILE, POLYETHYLENE/IMPERVIOUS TYPE.
Eye Protection:CHEM WORK GOGG, MAY ADD FULL (SUPP DATA)
Other Protective Equipment:IMPERVIOUS CLOTHING, BOOTS.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING,
DRINKING OR SMOKING.
Supplemental Safety and Health
WASTE DISP METH: APPROPRIATE DISPOSAL MAY INCLUDE INCINERATION. EYE
PROT: LENGTH FACESHIELD TO GOGGLES . DI-OCTYL ADIPATE HAS BEEN
DEMONSTRATED TO CAUSE CANCER IN LAB MICE (NCITR NCI-CG-TR-212,8 2).
NO SIMILAR EFFECTS IN HUMANS HAVE BEEN DEMONSTRATED.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:343F,173C
Spec Gravity:0.94
Evaporation Rate & Reference:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT LIQUID, YELLOW TINGE, MILDLY PUNGENT
ODOR.
Percent Volatiles by Volume:3.98
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, STRONG BASES, ALCOHOLS, METAL COMPOUNDS OR SURFACE ACTIVE
AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:CO, NO*X, TRACES OF HYDROGEN CYANIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:MIX W/EZ ENTRY PT B (POLYOL) & ALLOW TO GEL.
MATL THAT GELS MAY BE DISPOSED OF IN MUNICIPAL TRAXH AS NON-HAZ
WASTE. MATL WHICH DOES NOT GEL SHOULD BE TREATED AS A HAZ WASTE &
DISPOSED OF I/A/W ALL APP LIC LOC, ST & FED RULES & REGS. (SEE SUPP
DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LUXEPOXY SPRAYING THINNERS, 608314
| 12002-43-6
108-10-1
110-80-5
108-88-3
1330-20-7 |
|
FLEXOBOND 444
| 8001-79-4
112945-52-5 |
|
FLEXOBOND 444 FREEZE-PAK(R-99)AB0120-036,TY
| 8001-79-4
101-68-8
112945-52-5
133-07-3 |
|
METAL CONDITIONER, CP8223
| 7732-18-5
7664-38-2 |
|
BELEX POLAR GEAR OIL
| 8012-95-1
1314-13-2 |
|
LAM X500 GRAY TEFLON, 8X104
| 108-65-6
1344-28-1
78-93-3 |
|
LIQUID SLIP 2, 02868
| 8012-95-1
64-17-5 |
|
ZEOGEL
| 7631-86-9 |
|
AV-220 HYDRACURE WATER ACTIVATED EXPANSION
| 67-64-1
584-84-9 |
|
REZKLAD HI-BUILD 100 RESIN PT A, 0342326
| 67-64-1
28064-14-4
79-46-9
12003-38-2
13463-67-7
1309-37-1
7727-43-7
14807-96-6 |
|
FLEXGEL, 103266888
| 8009-03-8 |
|
EZ ENTRY ENCAPSULANT PART A, 845826239
| 101-68-8
103-23-1
9016-87-9 |
|
EZ ENTRY ENCAPSULANT PART B, 845826239
| 103-23-1 |
|
EPOXY RESIN PT B FOR CONSUMABLE KIT, 105501
| 112-24-3
7631-86-9 |
|
WHEAT, 11649-1
| 504-24-5 |
|
SOREGHUM, 11649-3
| 504-24-5 |
|
NBC
| 13927-77-0 |
|
TEFLON FINISH, 532-7000
| |
|
TEFLON FINISH, 532-5010
| |
|
TEFLON FINISH, 532-5012
| |
|
TEFLON FINISH, 532-6000
| |
|
ACRYLIC HP DEEP TINT BASE, 7-104
| 64742-52-5
107-21-1 |
|
SWIMMING POOL WHITE, 28-220
| 8052-41-3
64742-94-5
61788-76-9 |
|
ACRYLIC ENAMEL WHITE, 17-101
| 64742-52-5
111-77-3 |
|
ACRYLIC ENAMEL TINT BASE, 17-102
| 64742-52-5
111-77-3 |
|
ACRYLIC HP CLEAR BASE, 7-105
| 64742-52-5
107-21-1 |
|
POTASSIUM BROMIDE
| 7758-02-3 |
|
SK3
| 109-86-4
110-86-1
7553-56-2
7446-09-5 |
|
REGULAR UNLEAD GASOLINE
| 71-43-2
100-41-4
95-63-6
108-88-3
110-54-3
106-97-8
109-66-0
1634-04-4
1330-20-7 |
|
GASOLINE, AUTOMOTIVE, UNLEADED-87 OCTANE
| 71-43-2 |
|
UNLEAD GASOLINE, REGULAR
| 71-43-2
110-82-7
100-41-4
1634-04-4
108-88-3
1330-20-7 |
|
ETHYLENE GLYCOL ANTIFREEZE & SUMMER COOLANT
| 107-21-1
111-46-6 |
|
THIS MSDS IS FOR ALL MODELS OF DELCO BATTER
| 7664-93-9
7732-18-5
7439-92-1 |
|
HYDROCHLORIC ACID, 22 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
HYDROCHLORIC ACID, 23 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
DOLOMITIC HYDRATED LIME
| 1305-62-0
1309-42-8
1317-65-3
14808-60-7 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0 |
|
DISTILLATE FUELS (FS2)
| 68476-30-2 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0
7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
AMOCO #1 FUEL OIL
| 68476-30-2
91-20-3
1330-20-7 |
|
#1 FUEL OIL
| 68333-88-0 |
|
#2 FUEL OIL
| 8006-61-9 |
|
NO. 2 FUEL OIL (0.3% SULFUR MAX)
| 7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
#1 FUEL OIL
| 68333-88-0 |
|
FOG OIL (MIL-F-12070C)
| 64742-53-6 |
|
BARCO BOND MB-175 PT A
| 7631-86-9
25068-38-6 |
|
|