===================== Product Identification =====================
MSDS NAME:GASOLINE, AUTOMOTIVE, UNLEADED-87 OCTANE
NIIN:00-148-7103
MSDS Number: BKNSM
=== Responsible Party ===
Company:CHAMPLIN PETROLEUM CO
Address:1801 NUECES BAY BLVD
Box:9176
City:CORPUS CHRISTI
State:TX
ZIP:78469
Country:US
Info Phone Num:918-495-5933
Emergency Phone Num:318-491-6215, CHEMTREC 800-424-9300
CAGE:5M565
=== Contractor Identification ===
Company:CHAMPLIN PETROLEUM CO
Address:1801 NUECES BAY BLVD
Box:9176
City:CORPUS CHRISTI
State:TX
ZIP:78469
Country:US
Phone:318-491-6215, CHEMTREC 800-424-9300
CAGE:5M565
============= Composition/Information on Ingredients =============
Name:BENZENE (SARA III)
CAS:71-43-2
RTECS #:CY1400000
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1PPM/5STEL;1910.1028
ACGIH TLV:10 PPM; A2; 9192
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:PETROLEUM DISTILLATE MIXTURE
Fraction by Wt: 85-98%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM
ACGIH TLV:300 PPM
Name:ALIPHATIC ALCOHOLS
Fraction by Wt: 0-11%
Other REC Limits:25 PPM
Name:LOWER ALIPHATIC ETHERS
Fraction by Wt: 0-15%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM
ACGIH TLV:400 PPM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE-INHALATION:CENTRAL NERVOUS
SYSTEM DEPRESSION, HEADACHE, NAUSEA, DIZZINESS, FATIGUE, NARCOSIS,
UNCONSCIOUSNESS, ASPHYXIATION. EYE:IRRITATION. SKIN:DEFATING,
IRRITATION/DERMATITIS. INGESTION: GI D ISTURBANCES, NAUSEA,
VOMITING. CHRONIC:DERMATITIS, PNEUMOTITIS, PULMONARY EDEMA, AND
KIDNEY DAMAGE.
Explanation of Carcinogenicity:BENZENE IS LISTED AS A CARCINOGEN BY
NTP, IARC, OSHA AND EPA.
Effects of Overexposure:OVEREXPOSURE MAY LEAD TO RESPIRATORY
IRRITATION, NAUSEA, FATIGUE, DIZZINESS, HEADACHES, UNCONSCIOUSNESS,
AND EYE IRRITATION.
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN DISORDER SHOULD
USE CAUTION WHEN HANDLING OR USING THIS PRODUCT.
======================= First Aid Measures =======================
First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHALATION: REMOVE TO
FRESH AIR & RESTORE BREATHING IF NECESSARY. GET MEDICAL ATTENTION.
EYE : IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. INGESTION: GET IMMEDIATE
MEDICAL ATTENTION. DO NOT INDUCE VOMITING. NOTHING BY MOUTH IF
UNCONSCIOUS.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:<-42.8C, -45.F
Autoignition Temp:=257.2C, 495.F
Lower Limits:1.4%
Upper Limits:7.6%
Extinguishing Media:USE CARBON DIOXIDE, FOAM, OR DRY CHEMICAL. USE
WATER FOG TO COOL SRROUNDING CONTAINERS.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR AND MAY TRAVEL A
CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASH BACK.
================== Accidental Release Measures ==================
Spill Release Procedures:MINOR: ABSORB MATERIAL WITH CLAY, VERMICULITE,
OR SIMILAR ABSORBENT MATERIAL. PLACE IN DISPOSAL CONTAINERS. MAJOR:
DIKE & CONTAIN SPILL. ELIMINATE SOURCES OF IGNITION. SHUT OFF
LEAKS. REMOVE LIQUID BY VACUUM OR ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, VENTILATED WORK AREA.
KEEP CONTAINERS CLOSED WHEN NOT IN USE. FLAMMABLE LIQUID; EMPTY
CONTAINERS CAN BE HAZARDOUS.
Other Precautions:THE SELECTION OF PERSONAL PROTECTIVE EQUIPMENT SHOULD
BE MADE BY THE MATERIAL USER BASED ON THE PARTICULAR CONDITIONS
WHERE THE MATERIAL IS TO BE USED TOGETHER WITH INFORMATION
CONTAINED IN THIS MSDS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR. AIR-SUPPLIED
OR FILTERING TYPE WITH ORGANIC VAPOR CARTRIDGES ARE RECOMMENDED.
Ventilation:LOCAL AND MECHANICAL EXHAUST RECOMMENDED. AVOID OPEN
ELECTRICAL SOURCES NEAR PRODUCT VAPOR AREAS.
Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL
Eye Protection:USE CHEMICAL SAFETY GOGGLES & FACESHIELD
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:DO NOT TAKE INTERNALLY. AVOID SKIN CONTACT.
WASH SKIN AFTER USING PRODUCT. DO NOT EAT, DRINK OR SMOKE IN WORK
AREA.
Supplemental Safety and Health
NONE
================== Physical/Chemical Properties ==================
HCC:F1
Boiling Pt:=35.C, 95.F
Vapor Pres:510-760MM
Vapor Density:3-4
Spec Gravity:0.75
Evaporation Rate & Reference:<1 (BU AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT YELLOW OR CLEAR LIQUID WITH CHARATERISTIC
GASOLINE ODOR
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OTHER HYDROCARBON COMPOUNDS DURING COMBUSTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MAY BE BURNED IN AN APPROVED INCINERATOR
OR DISPOSED OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL LAWS AND REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LUXEPOXY SPRAYING THINNERS, 608314
| 12002-43-6
108-10-1
110-80-5
108-88-3
1330-20-7 |
|
FLEXOBOND 444
| 8001-79-4
112945-52-5 |
|
FLEXOBOND 444 FREEZE-PAK(R-99)AB0120-036,TY
| 8001-79-4
101-68-8
112945-52-5
133-07-3 |
|
METAL CONDITIONER, CP8223
| 7732-18-5
7664-38-2 |
|
BELEX POLAR GEAR OIL
| 8012-95-1
1314-13-2 |
|
LAM X500 GRAY TEFLON, 8X104
| 108-65-6
1344-28-1
78-93-3 |
|
LIQUID SLIP 2, 02868
| 8012-95-1
64-17-5 |
|
ZEOGEL
| 7631-86-9 |
|
AV-220 HYDRACURE WATER ACTIVATED EXPANSION
| 67-64-1
584-84-9 |
|
REZKLAD HI-BUILD 100 RESIN PT A, 0342326
| 67-64-1
28064-14-4
79-46-9
12003-38-2
13463-67-7
1309-37-1
7727-43-7
14807-96-6 |
|
FLEXGEL, 103266888
| 8009-03-8 |
|
EZ ENTRY ENCAPSULANT PART A, 845826239
| 101-68-8
103-23-1
9016-87-9 |
|
EZ ENTRY ENCAPSULANT PART B, 845826239
| 103-23-1 |
|
EPOXY RESIN PT B FOR CONSUMABLE KIT, 105501
| 112-24-3
7631-86-9 |
|
WHEAT, 11649-1
| 504-24-5 |
|
SOREGHUM, 11649-3
| 504-24-5 |
|
NBC
| 13927-77-0 |
|
TEFLON FINISH, 532-7000
| |
|
TEFLON FINISH, 532-5010
| |
|
TEFLON FINISH, 532-5012
| |
|
TEFLON FINISH, 532-6000
| |
|
ACRYLIC HP DEEP TINT BASE, 7-104
| 64742-52-5
107-21-1 |
|
SWIMMING POOL WHITE, 28-220
| 8052-41-3
64742-94-5
61788-76-9 |
|
ACRYLIC ENAMEL WHITE, 17-101
| 64742-52-5
111-77-3 |
|
ACRYLIC ENAMEL TINT BASE, 17-102
| 64742-52-5
111-77-3 |
|
ACRYLIC HP CLEAR BASE, 7-105
| 64742-52-5
107-21-1 |
|
POTASSIUM BROMIDE
| 7758-02-3 |
|
SK3
| 109-86-4
110-86-1
7553-56-2
7446-09-5 |
|
REGULAR UNLEAD GASOLINE
| 71-43-2
100-41-4
95-63-6
108-88-3
110-54-3
106-97-8
109-66-0
1634-04-4
1330-20-7 |
|
GASOLINE, AUTOMOTIVE, UNLEADED-87 OCTANE
| 71-43-2 |
|
UNLEAD GASOLINE, REGULAR
| 71-43-2
110-82-7
100-41-4
1634-04-4
108-88-3
1330-20-7 |
|
ETHYLENE GLYCOL ANTIFREEZE & SUMMER COOLANT
| 107-21-1
111-46-6 |
|
THIS MSDS IS FOR ALL MODELS OF DELCO BATTER
| 7664-93-9
7732-18-5
7439-92-1 |
|
HYDROCHLORIC ACID, 22 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
HYDROCHLORIC ACID, 23 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
DOLOMITIC HYDRATED LIME
| 1305-62-0
1309-42-8
1317-65-3
14808-60-7 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0 |
|
DISTILLATE FUELS (FS2)
| 68476-30-2 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0
7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
AMOCO #1 FUEL OIL
| 68476-30-2
91-20-3
1330-20-7 |
|
#1 FUEL OIL
| 68333-88-0 |
|
#2 FUEL OIL
| 8006-61-9 |
|
NO. 2 FUEL OIL (0.3% SULFUR MAX)
| 7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
#1 FUEL OIL
| 68333-88-0 |
|
FOG OIL (MIL-F-12070C)
| 64742-53-6 |
|
BARCO BOND MB-175 PT A
| 7631-86-9
25068-38-6 |
|
|