===================== Product Identification =====================
MSDS NAME:ETHYLENE GLYCOL ANTIFREEZE & SUMMER COOLANT
NIIN:00-181-7929
MSDS Number: BKNSQ
=== Responsible Party ===
Company:OLD WORLD AUTOMOTIVE PRODUCTS INC
Address:9 N BROADWAY ST
City:DES PLAINES
State:IL
ZIP:60016
Country:US
Info Phone Num:708-600-2000
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:DOD-HMIS (DGSC-SSH)
CAGE:0FGA3
=== Contractor Identification ===
Company:OLD WORLD AUTOMOTIVE PRODUCTS INC
Address:4065 COMMERCIAL AVE
Box:City:NORTHBROOK
State:IL
ZIP:60062
Country:US
Phone:708-559-2000
CAGE:0FGA3
============= Composition/Information on Ingredients =============
Name:ETHYLENE GLYCOL (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 90-95%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:DIETHYLENE GLYCOL
CAS:111-46-6
RTECS #:ID5950000
Fraction by Wt: 0-5%
Other REC Limits:NONE ESTABLISHED
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 = 5840 MG/KG (RAT)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRIMARY IRRITATION TO SKIN,
DEFFATING,DERMATITIS. PRIMARY IRRITATION TO EYES, REDNESS, TEARING
BLURRED VISION.ABSORPTION THRU SKIN INCREASES EXPOSURE. SWALLOWING
MAY BE HARMFUL OR FATAL, A CAUSES ABDO MINAL IRRITATION, NAUSEA,
VOMITING AND DIARRHEA.
Effects of Overexposure:SEE "HEALTH HAZARDS".
Medical Cond Aggravated by Exposure:NONE STATED.
======================= First Aid Measures =======================
First Aid:SKIN: FLUSH WITH PLENTY OF WATER; EYE:FLUSH WITH PLENTY OF
WATER FOR 15 MINUTES & GET MEDICAL ATTENTION; INHALE:REMOVE TO
FRESH AIR. IF BREATHING IS DIFFECULT, GIVE OXYGEN. OF BREATHING HAS
STOPPED, G IVE ARTIFICIAL RESPIRATION; INGEST: CALL A
PHYSICIANIMMEDIATELY.INDUCE VOMITING PROMPTLY FOLLOWING PHYSICIAN'S
INSTRUCTIONS OR BY HAVING PATIE STICK FINGER DOWN THROAT. NOTHING
FOR UNCONSCIOUS PE
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:245F/118C
Lower Limits:1.5
Extinguishing Media:USE NFPA CLASS B EXTINGUISHERS FOR CLASS III B
LIQUID FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.WATER
SPRAY MAY BE INEFFECTIVE ON FIRE BUT CAN PROTECT FIRE FIGHTERS &
COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE IF EXPOSED
EXTREME HEAT. APPLYING TO HOT SURFACE REQUIRES SPECIAL PRECAUTIONS.
EMPTY CONTAINERS VERY HAZARDOUS.
================== Accidental Release Measures ==================
Spill Release Procedures:SMALL SPILLS: MOP UP WITH ABSORBENT MATERIAL &
TRANSFER TO HOOD. FOR LARGE SPILLS: ISOLATE FROM OXIDIZERS, HEAT &
OPEN FLAME. PERSONS WITHOUT PROPER PROTECTION SHOULD BE KEPT FROM
AN AREA UNTI CLEANED UP.
Neutralizing Agent:NONE STATED.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID FREE FALL OF LIQUID.GROUND
CONTAINERS WHEN TRANSFERRING. DO NOT CUT, BRAZE OR WELD. EMPTY
CONTAINE VERY HAZARDOUS. FOLLOW ALL LABEL PRECAUTION
Other Precautions:NONE STATED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF OVER TLV, USE A NIOSH APPROVED
POSITIVE-PRESSURE SELF-CONTAINED BREATHING APPARATUS.
Ventilation:NORMAL VENTILATION.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE STATED.
Work Hygienic Practices:.
Supplemental Safety and Health
MSDS COPIED FROM SAME MATERIAL, SAME SUPPLIER, DIFFERENT SIZE
CONTAINER.
================== Physical/Chemical Properties ==================
HCC:V5
Boiling Pt:B.P. Text:339F,171C
Vapor Pres:0.4
Vapor Density:2.1
Spec Gravity:1.12
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID OXIDIZERS SUCH AS PERMANGANTES, CHROMATES, & PEROXIDES.
Stability Condition to Avoid:ISOLATE FROM HEAT AND OPEN FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE FROM
BURNING.
==================== Disposal Considerations ====================
Waste Disposal Methods:SMALL: EVAPORATE UNTIL ALL VAPORS ARE GONE.
LARGE:RECYCLE OR INCINERATE OBSERVING LOCAL, STATE & FEDERAL
HEALTH, SAFETY & POLLUTION. TO COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LUXEPOXY SPRAYING THINNERS, 608314
| 12002-43-6
108-10-1
110-80-5
108-88-3
1330-20-7 |
|
FLEXOBOND 444
| 8001-79-4
112945-52-5 |
|
FLEXOBOND 444 FREEZE-PAK(R-99)AB0120-036,TY
| 8001-79-4
101-68-8
112945-52-5
133-07-3 |
|
METAL CONDITIONER, CP8223
| 7732-18-5
7664-38-2 |
|
BELEX POLAR GEAR OIL
| 8012-95-1
1314-13-2 |
|
LAM X500 GRAY TEFLON, 8X104
| 108-65-6
1344-28-1
78-93-3 |
|
LIQUID SLIP 2, 02868
| 8012-95-1
64-17-5 |
|
ZEOGEL
| 7631-86-9 |
|
AV-220 HYDRACURE WATER ACTIVATED EXPANSION
| 67-64-1
584-84-9 |
|
REZKLAD HI-BUILD 100 RESIN PT A, 0342326
| 67-64-1
28064-14-4
79-46-9
12003-38-2
13463-67-7
1309-37-1
7727-43-7
14807-96-6 |
|
FLEXGEL, 103266888
| 8009-03-8 |
|
EZ ENTRY ENCAPSULANT PART A, 845826239
| 101-68-8
103-23-1
9016-87-9 |
|
EZ ENTRY ENCAPSULANT PART B, 845826239
| 103-23-1 |
|
EPOXY RESIN PT B FOR CONSUMABLE KIT, 105501
| 112-24-3
7631-86-9 |
|
WHEAT, 11649-1
| 504-24-5 |
|
SOREGHUM, 11649-3
| 504-24-5 |
|
NBC
| 13927-77-0 |
|
TEFLON FINISH, 532-7000
| |
|
TEFLON FINISH, 532-5010
| |
|
TEFLON FINISH, 532-5012
| |
|
TEFLON FINISH, 532-6000
| |
|
ACRYLIC HP DEEP TINT BASE, 7-104
| 64742-52-5
107-21-1 |
|
SWIMMING POOL WHITE, 28-220
| 8052-41-3
64742-94-5
61788-76-9 |
|
ACRYLIC ENAMEL WHITE, 17-101
| 64742-52-5
111-77-3 |
|
ACRYLIC ENAMEL TINT BASE, 17-102
| 64742-52-5
111-77-3 |
|
ACRYLIC HP CLEAR BASE, 7-105
| 64742-52-5
107-21-1 |
|
POTASSIUM BROMIDE
| 7758-02-3 |
|
SK3
| 109-86-4
110-86-1
7553-56-2
7446-09-5 |
|
REGULAR UNLEAD GASOLINE
| 71-43-2
100-41-4
95-63-6
108-88-3
110-54-3
106-97-8
109-66-0
1634-04-4
1330-20-7 |
|
GASOLINE, AUTOMOTIVE, UNLEADED-87 OCTANE
| 71-43-2 |
|
UNLEAD GASOLINE, REGULAR
| 71-43-2
110-82-7
100-41-4
1634-04-4
108-88-3
1330-20-7 |
|
ETHYLENE GLYCOL ANTIFREEZE & SUMMER COOLANT
| 107-21-1
111-46-6 |
|
THIS MSDS IS FOR ALL MODELS OF DELCO BATTER
| 7664-93-9
7732-18-5
7439-92-1 |
|
HYDROCHLORIC ACID, 22 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
HYDROCHLORIC ACID, 23 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
DOLOMITIC HYDRATED LIME
| 1305-62-0
1309-42-8
1317-65-3
14808-60-7 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0 |
|
DISTILLATE FUELS (FS2)
| 68476-30-2 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0
7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
AMOCO #1 FUEL OIL
| 68476-30-2
91-20-3
1330-20-7 |
|
#1 FUEL OIL
| 68333-88-0 |
|
#2 FUEL OIL
| 8006-61-9 |
|
NO. 2 FUEL OIL (0.3% SULFUR MAX)
| 7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
#1 FUEL OIL
| 68333-88-0 |
|
FOG OIL (MIL-F-12070C)
| 64742-53-6 |
|
BARCO BOND MB-175 PT A
| 7631-86-9
25068-38-6 |
|
|