===================== Product Identification =====================
MSDS NAME:HYDROCHLORIC ACID, 22 DEGREES BAUME, SPECIF
NIIN:00-222-9641
MSDS Number: BKNSS
=== Responsible Party ===
Company:AMERICAN DEVELOPMENT CORP
Address:HIGHWAY 118 WEST, ROUTE 2
City:VANCEBORO
State:NC
ZIP:28586
Country:US
Info Phone Num:919-244-0782
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:3J729
=== Contractor Identification ===
Company:AMERICAN DEVELOPMENT CORP
Address:1456 STATE CAMP ROAD
Box:385
City:VANCEBORO
State:NC
ZIP:28586
Country:US
Phone:919-244-0782
CAGE:3J729
============= Composition/Information on Ingredients =============
Name:HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)
CAS:7647-01-0
RTECS #:MW4025000
Fraction by Wt: 31.4%
Other REC Limits:NONE SPECIFIED
OSHA PEL:C 5 PPM
ACGIH TLV:C 5 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DAMAGE TO THE UPPER
RESPIRATORY TRACT. EYES AND SKIN: CORROSIVE. INGESTION: CORROSIVE
TO ESOPHAGUS AND STOMACH. MAY LEAD TO CONVULSIONS.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RISPIRATORY AILMENTS.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR, KEEP UPRIGHT POSITION,
PROVIDE OXYGEN, GET MEDICAL AID. SKIN AND EYES: FLUSH WITH WATER
FOR 15 MINUTES, INCLUDING UNDER THE EYELIDS. GET MEDICAL HELP.
INGESTION: DO NO T INDUCE VOMITING, GET MEDICAL ATTENTION. RINSE
MOUTH WITH PLENTY OF WATER. DRINK PLENTY OF WATER, GIVE MILK OF
MAGNESIA OR LIME WATER.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE PROTECTIVE CLOTHING SUITABLE FOR ACIDS AND
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FLAMMABLE HYDROGEN GAS IS GENERATED BY
REACTION WITH MANY METALS.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL OR LEAKS IN PLASTIC CONTAINERS,
DIKES, PONDS, OR RETENTION AREAS WHERE SPILLAGE CAN BE NEUTRALIZED.
Neutralizing Agent:SODA ASH OR ALKALINE SOLUTIONS.
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR EYE, RESPIRATORY AND CLOTHING TO
PROTECT AGAINST ACCIDENTAL SPILLS.
Other Precautions:FOLLOW FEDERAL, STATE, LOCAL AND PERMIT REGULATIONS,
PREPARE FOR EMERGENCIES IN ADVANCE, SUCH AS ACID RESISTANT FLOORS
AND DRAINAGE, NEUTRALIZATION MATERIALS, CONTAINMENT SAND, ETC.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH APPROVED ACID GAS CHEMICAL CARTRIDGE
RESPIRATOR OR FULL FACE WITH CANISTER. FOR UNKNOWN CONCENTRATIONS
USE APPROVED SELF-CONTAINED BREATHING APPARATUS.
Ventilation:SUFFICIENT TO CONTROL BELOW TLV REQUIREMENTS. DUE TO LOW
FREEZE POINTS THIS MATERIAL IS NORMALLY STOPPED OUTSIDE.
Protective Gloves:RUBBER, LAYTEX, PLASTIC.
Eye Protection:SPLASH GOGGLES OR FACE SHIELD.
Other Protective Equipment:DISPOSABLE PLASTIC SUITS, OR A RUBBER APRON.
Work Hygienic Practices:WEAR EYE, RESPIRATORY AND CLOTHING TO PROTECT
AGAINST ACCIDENTAL SPILLS.
Supplemental Safety and Health
KEEP METALS AWAY FROM STORAGE AREAS AS CONTACT MAY CAUSE HYDROGEN
GENERATION.
================== Physical/Chemical Properties ==================
HCC:C1
Boiling Pt:B.P. Text:144F,62C
Melt/Freeze Pt:M.P/F.P Text:-86F,-66C
Vapor Density:1.3 @ 20C
Spec Gravity:1.179
pH:< 0.1
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS TO LIGHT YELLOW FUMING LIQUID. PUNGENT
AND SUFFOCATING ODOR.
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
BASE METALS, METALS, METAL OXIDES, ALKALINE MATERIALS, CARBONATES,
AMINES, HYDROXIDES
Stability Condition to Avoid:HEAT SOURCES, CONTACT WITH METALS OR
ALKALIS, AND BODY CONTACT.
Hazardous Decomposition Products:HYDROGEN CHLORIDE GAS, HYDROGEN GAS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL IS CONTINGENT UPON ALLOWABLE SALT
CONCENTRATIONS AND PH IN THE EFFLUENT STREAM.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LUXEPOXY SPRAYING THINNERS, 608314
| 12002-43-6
108-10-1
110-80-5
108-88-3
1330-20-7 |
|
FLEXOBOND 444
| 8001-79-4
112945-52-5 |
|
FLEXOBOND 444 FREEZE-PAK(R-99)AB0120-036,TY
| 8001-79-4
101-68-8
112945-52-5
133-07-3 |
|
METAL CONDITIONER, CP8223
| 7732-18-5
7664-38-2 |
|
BELEX POLAR GEAR OIL
| 8012-95-1
1314-13-2 |
|
LAM X500 GRAY TEFLON, 8X104
| 108-65-6
1344-28-1
78-93-3 |
|
LIQUID SLIP 2, 02868
| 8012-95-1
64-17-5 |
|
ZEOGEL
| 7631-86-9 |
|
AV-220 HYDRACURE WATER ACTIVATED EXPANSION
| 67-64-1
584-84-9 |
|
REZKLAD HI-BUILD 100 RESIN PT A, 0342326
| 67-64-1
28064-14-4
79-46-9
12003-38-2
13463-67-7
1309-37-1
7727-43-7
14807-96-6 |
|
FLEXGEL, 103266888
| 8009-03-8 |
|
EZ ENTRY ENCAPSULANT PART A, 845826239
| 101-68-8
103-23-1
9016-87-9 |
|
EZ ENTRY ENCAPSULANT PART B, 845826239
| 103-23-1 |
|
EPOXY RESIN PT B FOR CONSUMABLE KIT, 105501
| 112-24-3
7631-86-9 |
|
WHEAT, 11649-1
| 504-24-5 |
|
SOREGHUM, 11649-3
| 504-24-5 |
|
NBC
| 13927-77-0 |
|
TEFLON FINISH, 532-7000
| |
|
TEFLON FINISH, 532-5010
| |
|
TEFLON FINISH, 532-5012
| |
|
TEFLON FINISH, 532-6000
| |
|
ACRYLIC HP DEEP TINT BASE, 7-104
| 64742-52-5
107-21-1 |
|
SWIMMING POOL WHITE, 28-220
| 8052-41-3
64742-94-5
61788-76-9 |
|
ACRYLIC ENAMEL WHITE, 17-101
| 64742-52-5
111-77-3 |
|
ACRYLIC ENAMEL TINT BASE, 17-102
| 64742-52-5
111-77-3 |
|
ACRYLIC HP CLEAR BASE, 7-105
| 64742-52-5
107-21-1 |
|
POTASSIUM BROMIDE
| 7758-02-3 |
|
SK3
| 109-86-4
110-86-1
7553-56-2
7446-09-5 |
|
REGULAR UNLEAD GASOLINE
| 71-43-2
100-41-4
95-63-6
108-88-3
110-54-3
106-97-8
109-66-0
1634-04-4
1330-20-7 |
|
GASOLINE, AUTOMOTIVE, UNLEADED-87 OCTANE
| 71-43-2 |
|
UNLEAD GASOLINE, REGULAR
| 71-43-2
110-82-7
100-41-4
1634-04-4
108-88-3
1330-20-7 |
|
ETHYLENE GLYCOL ANTIFREEZE & SUMMER COOLANT
| 107-21-1
111-46-6 |
|
THIS MSDS IS FOR ALL MODELS OF DELCO BATTER
| 7664-93-9
7732-18-5
7439-92-1 |
|
HYDROCHLORIC ACID, 22 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
HYDROCHLORIC ACID, 23 DEGREES BAUME, SPECIF
| 7647-01-0 |
|
DOLOMITIC HYDRATED LIME
| 1305-62-0
1309-42-8
1317-65-3
14808-60-7 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0 |
|
DISTILLATE FUELS (FS2)
| 68476-30-2 |
|
#2 FUEL OIL
| 8006-61-9 |
|
#2 FUEL OIL
| 68333-88-0
7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
AMOCO #1 FUEL OIL
| 68476-30-2
91-20-3
1330-20-7 |
|
#1 FUEL OIL
| 68333-88-0 |
|
#2 FUEL OIL
| 8006-61-9 |
|
NO. 2 FUEL OIL (0.3% SULFUR MAX)
| 7704-34-9
71-43-2 |
|
LIGHT FUEL OIL (DIESEL)
| 108-88-3
91-20-3
68476-34-6 |
|
#1 FUEL OIL
| 68333-88-0 |
|
FOG OIL (MIL-F-12070C)
| 64742-53-6 |
|
BARCO BOND MB-175 PT A
| 7631-86-9
25068-38-6 |
|
|