===================== Product Identification =====================
MSDS NAME:ATOM ARC, 8018-C1
NIIN:00N015724
MSDS Number: BKRMM
=== Responsible Party ===
Company:ALLOY RODS CORPORATION
Address:WILSON AVENUE
Box:517
City:HANOVER
State:PA
ZIP:17331
Country:US
Info Phone Num:717-637-8911
Emergency Phone Num:717-637-8911
CAGE:84021
=== Contractor Identification ===
Company:ESAB GROUP INC
Address:801 WILSON AVENUE
Box:517
City:HANOVER
State:PA
ZIP:17331
Country:US
Phone:717-637-8911 OR 800-933-7070
CAGE:84021
============= Composition/Information on Ingredients =============
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:SILICIC ACID (H2SI03), DISODIUM SALT (SODIUM SILICATE)
CAS:6834-92-0
RTECS #:VV9275000
Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Other REC Limits:5 MG/M3 (MFR)
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293
Name:POTASSIUM SILICATE
CAS:1312-76-1
Name:CALCIUM FLUORIDE
CAS:7789-75-5
RTECS #:EW1760000
Other REC Limits:2.5 AS F (MFR)
Name:POTASSIUM FELDSPAR
CAS:68476-25-5
Name:ZIRCONIUM
CAS:7440-67-7
RTECS #:ZH7070000
Other REC Limits:5 MG/M3 (MFR)
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3/10 STEL;9192
Name:OTHER PROT EQUIP:SHOULDER PROTECTION, AS WELL AS DARK
SUBSTANTIAL CLOTHING.
RTECS #:9999999ZZ
Name:IRON OXIDE
CAS:1309-37-1
RTECS #:NO7400000
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Other REC Limits:1-0.5
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:FUMES AND GASES CAN BE DANGEROUS TO
YOUR HEALTH. ACUTE: OVEREXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF
NOSE, THROAT, OR EYES. CHRONIC: MA Y LEAD TO SIDEROSIS (IRON
DEPOSITS IN THE LUNG) AND IS BELIEVED BY SOME INVESTIGATORS TO
AFFECT (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHROMIUM:GROUP 1 (NTP) GROUP 1 (IARC),
NICKEL:GROUP 2 (NTP) GROUP 1 (IARC).
Effects of Overexposure:HLTH HAZ:PULMONARY FUNCTION. ARC RAYS CAN
INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:+GGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDTIONS MAY OCCUR IN SOME WORKERS.
======================= First Aid Measures =======================
First Aid:EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED
CROSS. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (O*2/ARTF RESP)
.
===================== Fire Fighting Measures =====================
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:REFER TO AM NATL STD Z-49.1 & OSHA PUB 2206.
USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONFLAMMABLE:WELDING ARC & SPARKS CAN
IGNITE COMBUSTIBLES. REFER TO AM NATNL STD Z-49.1
================== Accidental Release Measures ==================
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS
AND TO INSULATE HIMSELF FROM WORK AND GROUND.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT THE ARC, OR BOTH, TO KEEP
THE FUMES AND GASES BELOW THE TLV'S IN (SEE SUPP DATA)
Protective Gloves:WELDERS GLOVES
Eye Protection:WEAR HELMET/FACESHIELD (SEE SUPP DATA)
Other Protective Equipment:WEAR HEAD/HAND/BODY PROT TO PVNT INJURY FROM
RADIA/SPARKS/ELEC SHOCK. MAY INCL ARM PROT/APRONS/HATS/ (SEE INGRED
15)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT:WORKER'S BRTHG ZONE/GENL AREA. TRAIN WELDER TO KEEP HEAD OUT OF
FUMES. EYE PROT:W/FILTER LENS. AS A RULE OF THUMB, START W/A SHADE
WHICH IS TOO DARK TO SEE WELD ZONE. THEN TO NEXT LIGHTER SHADE W
HICH GIVES SUFF VIEW OF WELD ZONE. PROVIDE PROT SCRNS/FLASH GOGG,
IF NEC, TO SHLD OTHERS.
================== Physical/Chemical Properties ==================
HCC:N1
Appearance and Odor:ATOM ARC COVERED LOW HYDROGEN ELECTRODES
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DEPENDS ON BASE METAL, PROCESS,
PROCEDURES, COATINGS & CONTAMINANTS:REFER TO ORIGINAL MSDS .
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRNMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE AN D LOCAL REGULATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|