===================== Product Identification =====================
MSDS NAME:HARDENER HY 837
NIIN:00N017770
MSDS Number: BLTDF
=== Responsible Party ===
Company:CIBA-GEIGY CORP REN PLASTICS DIV
Address:4917 DAWN AVE
City:EAST LANSING
State:MI
ZIP:48823-5605
Country:US
Info Phone Num:517-351-5900 / FAX 517-351-9003
Emergency Phone Num:517-351-5900
CAGE:02684
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
============= Composition/Information on Ingredients =============
Name:PHENOL
CAS:108-95-2
RTECS #:SJ3325000
Fraction by Wt: 14%
OSHA PEL:5 PPM,S
ACGIH TLV:5 PPM,S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:MODIFIED ALIPHATIC AMINE-PROPRIETARY INGREDIENT.
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50:(ORAL RAT) 1030 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WILL CAUSE EXTREME EYE AND SKIN
IRRITATION. HARMFUL IF INGESTED OR ABSORBED THROUGH THE SKIN.
CORROSIVE. POTENTIAL SENSITIZER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA OR SKIN CONDITIONS.
======================= First Aid Measures =======================
First Aid:EYE:IMMED FLUSH EYE WITH WATER FOR AT LEAST 15 MINUTES. CALL
MD. SKIN:PROMPTLY WASH THOROUGHLY WITH MILD SOAP AND WATER.
INGEST:GET MD IMMEDIATELY. DO NOT INDUCE VOMITING. IF CONSCIOUS,
GIVE PLENTY OF WATER TO DILUTE. INHAL:REMOVE TO FRSH AIR. GIVE
OXYGEN IF BREATHING IS DIFFICULT. CALL MD. PROMPTLY REMOVE WET
CONTAMINATED NON-IMPERVIOUS CLOTHING, WASH BEFORE REUSE. DESTROY
CONTAM LEATHER/SHOES.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID ALL PERSONAL CONTACT. TAKE UP WITH
ABSORBENT MATERIAL. SHOVEL INTO CLOSABLE CONTAINERS. FLUSH
CONAMINATED AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS IN
DRY AREA. USE ONLY WITH ADEQUATE VENT. DO NOT GET IN EYES, ON SKIN,
ON CLOTHING. DO NOT BREATHE VAPOR/MIST/SPRAY
Other Precautions:DANGER! CORROSIVE TO EYES AND SKIN. HARMFUL IF
SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. MAY CAUSE DERMATITIS
AND SENSITIZATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC CHEMICAL CARTRIDGE
RESPIRATOR, IF NEEDED.
Ventilation:GOOD GENERAL MECHANICAL VENTILATION AND LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES, ADD(SUPP DATA)
Other Protective Equipment:WEAR APPROPRIATE EQUIP TO PREVENT
PROBABILITY OF SKIN OR EYE CONTACT. EMERGENCY EYEWASH STATION &
DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EYE PROT:FULL LENGTH FACESHIELD TO GOGGLES .
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:>392F,>200C
Decomp Temp:Decomp Text:>392F,>200C
pH:11
Solubility in Water:SLIGHTLY MISCIBLE
Appearance and Odor:CLEAR LIQUID, AMINE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2, ALDEHYDES, NITROGEN OXIDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
HETRON FR 991, 566639
| 100-42-5 |
|
UGL 222 LITE SPACKLE 244
| 107-21-2
65997-17-3
9003-20-7
7732-18-5 |
|
C-100 A/C-101 A
| 101-68-8 |
|
RUSTLICK 711
| |
|
50-082, BREAKTHRU SAT-SAFTY BLU 50 82
| 111-76-2
84-74-2 |
|
CROWN VM&P NAPHTHA RULE 66/LIGHT ALIPHATIC(
| 8030-30-6
108-88-3
1330-20-7 |
|
ASPHALT EMULSION SS-1H, CPS291126
| 8052-42-4
7732-18-5 |
|
DECANE
| 124-18-5 |
|
LUSTER-GUARD, 4093.
| |
|
MITT GARD AA, 5946
| |
|
CGL 1320 RESIN
| 2425-79-8
7429-90-5
7782-42-5
21645-51-2
28768-32-3
1302-78-9
1333-86-4 |
|
ETHANOX 702 ANTIOXIDANT
| 118-82-1 |
|
INDUSTRIAL EPOXY, 101-147A & B RED PRIMER
| 13530-65-9
111-46-6
1330-20-7 |
|
EPOXY PRIMER COMPONENT B, 101-147B
| 1330-20-7 |
|
INDUSTRIAL EPOXY, 101-155 PRIMER
| 13530-65-9
108-10-1
1330-20-7
108-88-3 |
|
EPOXY PRIMER COMPONENT B, 101-155B
| 1330-20-7 |
|
INDUSTRIAL ACRYLIC EPOXY, 138-34 A&B
| 110-80-5
121-44-8
7732-18-5 |
|
INDUSTRIAL ENAMEL, 139-1 WHITE
| |
|
INDUSTRIAL ENAMEL, 139-2 BLACK
| |
|
INDUSTRIAL ENAMEL CLEAR BASE, 139-36
| |
|
INDUSTRIAL ENAMEL DEEP BASE, 139-38
| |
|
INDUSTRIAL ENAMEL, 139-101 WHITE
| |
|
INDUSTRIAL ENAMEL, 139-134 INTERNATIONAL RE
| |
|
INDUSTRIAL ENAMEL, 139-136 OSHA RED
| |
|
INDUSTRIAL ENAMEL, 139-137/139-1030 BLUE
| |
|
VITRALON QD ENAMEL RTV, 865-261
| 8030-30-6
64742-89-8
13463-67-7
1330-20-7
100-41-4 |
|
SN 150, 482200
| 64741-88-4 |
|
CUSTOM STANDARD SOLUTION SINGLE ELEMENT
| 7664-93-9
77-92-9 |
|
SEQUESTRENE AA-92
| 139-13-9
60-00-4 |
|
QZ 3289 ADHESION CONCENTRATE
| 64-17-5 |
|
CGL 1330
| 931-36-2
25085-99-8
28064-14-4
68738-77-2 |
|
RP 1510 HARDENER
| 1477-55-0
616-47-7
2855-13-2
68738-77-2 |
|
ARALDITE RD-2
| 2425-79-8 |
|
ARALDITE PY 307
| 28064-14-4 |
|
ARALDITE RD-1
| 2426-08-6 |
|
ARALDITE GY 507
| 26447-14-3
25068-38-6 |
|
HARDENER HY 837
| 108-95-2 |
|
ARALDITE GY 506
| 2426-08-6
25068-38-6 |
|
5090/DOCUTECH DRY INK, 6R272 (FX)
| 9003-55-8
1309-37-1
1333-86-4
3843-16-1 |
|
5090/DOCUTECH DRY INK, 6R90100 (RX)
| 9003-55-8
1309-37-1
1333-86-4
3843-16-1 |
|
5090/DOCUTECH DRY INK, 6R516 (XCI)
| 9003-55-8
1309-37-1
1333-86-4
3843-16-1 |
|
POWER BELT TREATMENT # 91004
| 71-55-6 |
|
POWER BELT TREATMENT # 91001
| 68476-86-8
71-55-6 |
|
ANFO P
| 6484-52-2 |
|
SCREEN CLEANER
| 64-17-5
7732-18-5 |
|
BUN REAGENT X315XX
| 26628-22-8 |
|
500 SUPER SEAL PVA SEALER, B500
| 14808-60-7
107-21-1 |
|
330 SUNSHIELD EXTERIOR SG:TB; B330
| 57-55-6
25265-77-4 |
|
220 INTERIOR SEMIGLOSS:TB, B220
| 57-55-6
25265-77-4 |
|
221 INTERIOR SEMI-GLOSS:XX, 0221
| 25265-77-4
57-55-6 |
|
|