===================== Product Identification =====================
MSDS NAME:ARALDITE PY 307
NIIN:00N017767
MSDS Number: BLTDB
=== Responsible Party ===
Company:CIBA-GEIGY CORP REN PLASTICS DIV
Address:4917 DAWN AVE
City:EAST LANSING
State:MI
ZIP:48823-5605
Country:US
Info Phone Num:517-351-5900 / FAX 517-351-9003
Emergency Phone Num:517-351-5900
Preparer's Name:DR JONAS WEISS
CAGE:02684
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
============= Composition/Information on Ingredients =============
Name:EPOXY PHENOL NOVOLAC RESIN;(PHENOL-FORMALDEHYDE POLYMER,
GLYCIDYL ETHER)
CAS:28064-14-4
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50:(ORAL RAT) >5000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MODERATE SENSITIZER. IRRITATION,
SENSITIZATION AND DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA OR SKIN CONDITIONS.
======================= First Aid Measures =======================
First Aid:EYE:IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 15
MUNUTES. CALL MD. INGEST:IF CONSCIOUS, GIVE LARGE QUANTITIES OF
WATER. GET MD. INHAL:REMOVE TO FRESH AIR. GIVE O*2 IF NECESSARY.
SKIN:PROMPTLY WAS H WITH MILD SOAP AND WATER.
===================== Fire Fighting Measures =====================
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID ALL PERSONAL CONTACT. TAKE UP WITH
ABSORBENT MATERIAL. SHOVEL INTO CLOSABLE CONTAINERS. FLUSH
CONTAMINATED AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:WARNING! CAUSES IRRITATION. MAY CAUSE
ALLERGIC SKIN REACTION. AVOID CONTACT WITH EYES, SKIN OR CLOTHING.
USE WITH GOOD VENTILATION.
Other Precautions:AVOID BREATHING VAPOR, MIST OR SPRAY. STORE IN COOL,
DRY AREA IN CLOSED CONTAINERS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SUITABLE FOR
ORGANIC VAPORS, IF REQUIRED.
Ventilation:GOOD GENERAL MECHANICAL VENTILATION AND LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROPRIATE EQUIPMENT TO PREVENT EYE OR
SKIN CONTACT.
Work Hygienic Practices:WASH AFTER HANDLING, AND BEFORE EATING,
DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:>392F,>200C
Decomp Temp:Decomp Text:>392F,>200C
Vapor Pres:<0.001@20C
Spec Gravity:1.17
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID, SLIGHT ODOR.
Percent Volatiles by Volume:<0.5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURE.
Hazardous Decomposition Products:CO, CO*2, ALDEHYDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
HETRON FR 991, 566639
| 100-42-5 |
|
UGL 222 LITE SPACKLE 244
| 107-21-2
65997-17-3
9003-20-7
7732-18-5 |
|
C-100 A/C-101 A
| 101-68-8 |
|
RUSTLICK 711
| |
|
50-082, BREAKTHRU SAT-SAFTY BLU 50 82
| 111-76-2
84-74-2 |
|
CROWN VM&P NAPHTHA RULE 66/LIGHT ALIPHATIC(
| 8030-30-6
108-88-3
1330-20-7 |
|
ASPHALT EMULSION SS-1H, CPS291126
| 8052-42-4
7732-18-5 |
|
DECANE
| 124-18-5 |
|
LUSTER-GUARD, 4093.
| |
|
MITT GARD AA, 5946
| |
|
CGL 1320 RESIN
| 2425-79-8
7429-90-5
7782-42-5
21645-51-2
28768-32-3
1302-78-9
1333-86-4 |
|
ETHANOX 702 ANTIOXIDANT
| 118-82-1 |
|
INDUSTRIAL EPOXY, 101-147A & B RED PRIMER
| 13530-65-9
111-46-6
1330-20-7 |
|
EPOXY PRIMER COMPONENT B, 101-147B
| 1330-20-7 |
|
INDUSTRIAL EPOXY, 101-155 PRIMER
| 13530-65-9
108-10-1
1330-20-7
108-88-3 |
|
EPOXY PRIMER COMPONENT B, 101-155B
| 1330-20-7 |
|
INDUSTRIAL ACRYLIC EPOXY, 138-34 A&B
| 110-80-5
121-44-8
7732-18-5 |
|
INDUSTRIAL ENAMEL, 139-1 WHITE
| |
|
INDUSTRIAL ENAMEL, 139-2 BLACK
| |
|
INDUSTRIAL ENAMEL CLEAR BASE, 139-36
| |
|
INDUSTRIAL ENAMEL DEEP BASE, 139-38
| |
|
INDUSTRIAL ENAMEL, 139-101 WHITE
| |
|
INDUSTRIAL ENAMEL, 139-134 INTERNATIONAL RE
| |
|
INDUSTRIAL ENAMEL, 139-136 OSHA RED
| |
|
INDUSTRIAL ENAMEL, 139-137/139-1030 BLUE
| |
|
VITRALON QD ENAMEL RTV, 865-261
| 8030-30-6
64742-89-8
13463-67-7
1330-20-7
100-41-4 |
|
SN 150, 482200
| 64741-88-4 |
|
CUSTOM STANDARD SOLUTION SINGLE ELEMENT
| 7664-93-9
77-92-9 |
|
SEQUESTRENE AA-92
| 139-13-9
60-00-4 |
|
QZ 3289 ADHESION CONCENTRATE
| 64-17-5 |
|
CGL 1330
| 931-36-2
25085-99-8
28064-14-4
68738-77-2 |
|
RP 1510 HARDENER
| 1477-55-0
616-47-7
2855-13-2
68738-77-2 |
|
ARALDITE RD-2
| 2425-79-8 |
|
ARALDITE PY 307
| 28064-14-4 |
|
ARALDITE RD-1
| 2426-08-6 |
|
ARALDITE GY 507
| 26447-14-3
25068-38-6 |
|
HARDENER HY 837
| 108-95-2 |
|
ARALDITE GY 506
| 2426-08-6
25068-38-6 |
|
5090/DOCUTECH DRY INK, 6R272 (FX)
| 9003-55-8
1309-37-1
1333-86-4
3843-16-1 |
|
5090/DOCUTECH DRY INK, 6R90100 (RX)
| 9003-55-8
1309-37-1
1333-86-4
3843-16-1 |
|
5090/DOCUTECH DRY INK, 6R516 (XCI)
| 9003-55-8
1309-37-1
1333-86-4
3843-16-1 |
|
POWER BELT TREATMENT # 91004
| 71-55-6 |
|
POWER BELT TREATMENT # 91001
| 68476-86-8
71-55-6 |
|
ANFO P
| 6484-52-2 |
|
SCREEN CLEANER
| 64-17-5
7732-18-5 |
|
BUN REAGENT X315XX
| 26628-22-8 |
|
500 SUPER SEAL PVA SEALER, B500
| 14808-60-7
107-21-1 |
|
330 SUNSHIELD EXTERIOR SG:TB; B330
| 57-55-6
25265-77-4 |
|
220 INTERIOR SEMIGLOSS:TB, B220
| 57-55-6
25265-77-4 |
|
221 INTERIOR SEMI-GLOSS:XX, 0221
| 25265-77-4
57-55-6 |
|
|