=====================  Product Identification  =====================

MSDS NAME:WALLPLATE INTERIOR SEMI-GLOSS WHITE, 12800
NIIN:00N073583
MSDS Number: CCNXJ
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 SOUTH HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE GLYCOL (SARA 313) (CERCLA)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2.70%
OSHA PEL:N/K 
ACGIH TLV:C 50 PPM, VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:ETHANOL, 2-(2-BUTOXYETHOXY)-; (BUTOXYETHOXY ETHANOL)
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUP DAT: BUILDUP WHICH COULD RESULT IN CONTAINER RUPTURE.
RTECS #:9999999ZZ

Name:FIRST AID PROC: SWALLOW (1-2 TABLESPOONS FOR AN ADULT) PREF
    W/SYRUP OF IPECAC UNDER DIRECTION FROM MD/POIS CTR. (ING 6)
RTECS #:9999999ZZ

Name:ING 5: IF SYRUP OF IPECAC IS NOT AVAIL, VOMIT CAN BE
    INDUCED BY GENTLY PLACING TWO FINGERS IN THE BACK OF THE (ING 7)
RTECS #:9999999ZZ

Name:ING 6: THROAT. IF POSSIBLE, DO NOT LEAVE VICTIM UNATTENDED.
RTECS #:9999999ZZ

Name:SPILL PROC: POLLUTION CONTROL AGENCIES. CALL SPILL RESPONSE
    TEAMS IF LARGE SPILL.
RTECS #:9999999ZZ

Name:OTHER PREC: REMOVED BY ABRASIVE BLASTING, SANDING, OR
    GRINDING.
RTECS #:9999999ZZ

Name:RESP PROT: PARTICULATE & GAS & VAP. IN CONFINED AREAS USE
    NIOSH APPRVD AIR LINE TYPE RESPS/HOODS. RESP PROT MAY (ING 11)
RTECS #:9999999ZZ

Name:ING 10: ALSO BE NEC IN ANY LATER MANUFACTURING OPERATIONS
    IN WHICH PROD MAY BECOME AIRBORNE IN THE FORM OF VAP/DUST.
RTECS #:9999999ZZ

Name:VENT: RESP TO PVNT OVEREXP. PROVIDE GEN DILUTION/LOC EXHST
    VENT IN VOL & PATTERN TO KEEP TLV OF THE MOST HAZ (ING 13)
RTECS #:9999999ZZ

Name:ING 12: ING BELOW ACCEPTABLE LIM, LEL BELOW STATED LIM, &
    TO REMOVE DECOMP PRODS DURING WELDING/FLAME CUTTING (ING 14)
RTECS #:9999999ZZ

Name:ING 13: ON SURFACES COATED WITH THIS PRODUCT.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAN BE IRRIT TO EYES. MAY CAUSE
    SKIN IRRIT & DRYING/DEFAT/CRACKING, & DERM ON RPTD/PRLNG EXPOS TO
    SKIN. CHRONIC: RPTS HAVE ASSOC RPTD & PRLNG OCCUP OVEREXP TO SOLVS
    W/PERM BRAIN & NERV SYS DMG.  INTENTIONAL MISUSE BY DELIBERATELY
    CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL/FATAL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/LUKE WARM WATER FOR AT LEAST 15 MIN. SEEK MD
    IMMED. SKIN: FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE
    CONTAM CLTHG PROMPTLY. CONT MD IMMED. INHAL: REMOVE EXPOSED
    INDIVIDUAL TO F RESH AIR. RESTORE BRTHG IF REQUIRED. CONT MD IMMED.
    INGEST: NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. IF VICTIM
    IS CONSCIOUS & ALERT, VOMIT SHOULD BE INDUCED FOR INGEST OF MORE
    THAN ONE (ING 5)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:214F,101C
Lower Limits:0.9%
Upper Limits:6.2%
Extinguishing Media:NFPA CLASS B EXTINGUISHER IS DESIGNED TO EXTINGUISH
    NFPA CLASS IB FLAMMABLE LIQUID FIRES.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE USED TO COOL CLSD
    CONTRS TO PVNT PRESS BUILDUP & POSS (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPKS & OPEN FLAME. CLSD CONTR MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP &/CONTAIN DISCHARGE IF IT MAY BE DONE
    SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENT AREA OF SPILL. USE
    NON-SPK TOOLS FOR CLEANUP. COVER W/INERT MATL TO REDUCE FUMES. KEEP
    OUT OF DRAINS, SEWERS/WAT ERWAYS. CONT FIRE AUTH. NOTIFY LOC HLTH&
    (ING 8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT BREATHE VAPS/SPRAY MIST. KEEP
    PROD CONTRS COOL, DRY & AWAY FROM SOURCES OF IGNIT. USE & STORE
    THIS PROD W/ADEQ VENT.
Other Precautions:DO NOT SMOKE IN STORAGE AREAS. KEEP FROM FREEZING. DO
    NOT STORE ABOVE 120F. DO NOT TAKE INTERNALLY. CLOSE CONTR AFTER
    EACH USE. KEEP OUT OF REACH OF CHILDREN! THIS PROD CONTAINS
    PIGMENTS WHICH MAY BEC OME A DUST NUISANCE WHEN (ING 9)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR/OPEN AREAS USE NIOSH APPRVD MECH
    FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
    SPRAY APPLICATION. IN RESTRICTED VENT AREAS USE NIOSH APPRVD
    CHEM-MECH FILTERS DESIGNED T O REMOVE A COMBINATION OF (ING 10)
Ventilation:USE VENT AS REQUIRED TO CTL VAP CONCS. AVOID PRLNG/RPTD
    BRTHG OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH APPRVD (ING 12)
Protective Gloves:NATURAL RUBB, NEOPRENE, BUNA N/NITRILE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . APRON SHOULD BE WORN TO AVOID SKIN CONTACT.
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
    WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR IT UNTIL PROPERLY
    LAUNDERED.
Supplemental Safety and Health
FIRE FIGHT PROC: AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER
    IS USED, FOG NOZZ ARE PREF. EXPLO HAZ: SURF. NEVER USE
    WELDING/CUTTING TORCH ON/NEAR CONTR (EVEN EMPTY) BECAUSE PROD (EVEN
    RESID UE) MAY IGNITE EXPLO. CONTRS EXPOSED TOINTENSE HEAT FROM
    FIRES SHOULD BE COOLED W/WATER TO PVNT VAP PRESS (ING 4)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:0.08
Vapor Density:HVR/AIR
Spec Gravity:1.33 
VOC Grams/Liter:1.12
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:55.81

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:AVOID EXPOSURE TO SPARKS, OPEN FLAME, HOT
    SURFACES, AND ALL SOURCES OF HEAT AND IGNITION.
Hazardous Decomposition Products:MAY PRDCE HAZ FUMES WHEN HEATED TO
    DECOMP AS IN WELDING. FUMES MAY CONTAIN CARBON MONOXIDE/DIOXIDE,
    OXIDES OF NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED, OR WATERWAY.
    DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE LOCAL, COUNTY,
    STATE, AND FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***