=====================  Product Identification  =====================

MSDS NAME:MIL-F-12070C;FOG OIL
NIIN:00-261-7895
MSDS Number: BDPNV
=== Responsible Party ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Info Phone Num:201-945-9400
Emergency Phone Num:201-945-9400
CAGE:82925
=== Contractor Identification ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
Box:City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Phone:201-945-9400
CAGE:82925

=============  Composition/Information on Ingredients  =============

Name:MINERAL OIL, PETROLEUM DISTILLATE, HYDROTREATED HEAVY
    NAPHTENIC
CAS:64742-52-5
RTECS #:PY8035000
Fraction by Wt: >99%
OSHA PEL:5MG/CUM (OIL MIST)
ACGIH TLV:5MG/CUM (OIL MIST)

Name:FOG OIL SHALL BE OF OVERHEAD PETROLEUM FRACTION(S) & SHALL
    CONTAIN NO ADDITIVES/REREFINED
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 ORAL"MAN"=1PINT TO 1QUART
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED CONTACT WITH THE
    SKIN WILL DRY & DEFAT THE SKIN,LEADING TO IRRITATION & DERMATITIS.
    INHALATION OF FUMES IN HIGH CONCENTRATION MAY RESULT IN
    DIZZINESS,HEADACHE,RESPIRATORY IRRITAT ION OR UNCONSCIOUSNESS.
Explanation of Carcinogenicity:MANUFACTURER STATES NOT CARCINOGENIC.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN;RESPIRATORY AILMENTS.

=======================  First Aid Measures  =======================

First Aid:IF OVERCOME BY FUMES,REMOVE FROM EXPOSURE IMMEDIATELY;CALL A
    PHYSICIAN. IF BREATHING IS IRREGULAR OR STOPPED,START
    RESUSCITATION,ADMINISTER OXYGEN. IF INGESTED DO NOT INDUCE
    VOMIT,CALL A PHYSICIAN. IN	CASE OF SKIN CONTACT,REMOVE
    CONTAMINATED CLOTH & WASH SKIN WITH SOAP & WARM WATER. IF
    IRRITATION PERSISTS,CALL A PHYSICIAN. IF SPLASHED INTO EYES,FLUSH
    EYES WITH CLEAR WATER FOR 15 MINUTES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:330F,166C
Extinguishing Media:CO*2,FOG FOAM,DRY CHEMICAL.
Fire Fighting Procedures:COOL CONTAINER WITH WATER SPRAY;USE SCBA IF
    NEEDED
Unusual Fire/Explosion Hazard:HEATING MIGHT INCREASE PRESSURE;USE CARE
    TO AVOID EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PROTECTION;REMOVE ALL IGNITION
    SOURCES.USE SAND AND SUITABLE ABSORBENT MATERIAL AND RECOVER FOR
    PROPER DISPOSAL

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY AND WELL VENTILATED
    AREA;KEEP AWAY FROM HEAT OR OPEN FLAMES AND KEEP TIGHTLY CLOSED
    WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR OIL
    MIST/VAPOR IF NEEDED
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:WEAR CHEMICAL RESISTANT GLOVES & APRON.
Work Hygienic Practices:AVOID CONTACT WITH SKIN OR EYES.DO NOT BREATHE
    MIST OR VAPORS.WASH THOROUGHLY AFTER EACH USE.LAUNDER CONTAMINATED
    CLOTH.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:600F/316C+
Vapor Pres:<1
Vapor Density:>1.0
Spec Gravity:<1.0
Viscosity:3.4CST @212F
Evaporation Rate & Reference:<1.0 (BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LUBE OIL,HYDROCARBON ODOR
Percent Volatiles by Volume:<1.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:BURNING MAY GIVE SMOKE,AND CO OR CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPIOSE OF COLLECTED MATERIAL IN ACCORDANCE
    WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***