===================== Product Identification =====================
MSDS NAME:AMCO 38
NIIN:00-260-1267
MSDS Number: BDPLW
=== Responsible Party ===
Company:FORCE CHEMICALS DIV., AMERICAN SOLDER & FLUX CO,NC
Emergency Phone Num:(215)647-3575
CAGE:DO821
=== Contractor Identification ===
Company:AMERICAN SOLDER AND FLUX CO INC FORCE CHEMICAL DIV
Address:28 INDUSTRIAL BLVD
Box:City:PAOLI
State:PA
ZIP:19301
Country:US
Phone:800-424-9300
CAGE:70540
Company:FORCE CHEMICALS DIVISION-AMERICAN SOLDER & FLUX CO
Address:28 INDUSTRIAL BLVD.
City:PAOLI
State:PA
ZIP:19301
Country:US
Phone:215647-3575
CAGE:DO821
============= Composition/Information on Ingredients =============
Name:BORON DERIVATIVES (TLV BASED ON BORON)
Fraction by Wt: 100%
ACGIH TLV:10 MG/CUM
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE MODERATE SKIN & EYE IRRITATION.
======================= First Aid Measures =======================
First Aid:WASH SIN W/SOAP & WATER. FLUSH EYES W/PLENTY OF WATER FOR AT
LEAST 15 MIN. IF INGESTED, CONSULT A PHYSICIAN.
===================== Fire Fighting Measures =====================
Extinguishing Media:NONE:MATERIAL HAS FIRE RETARDANT PROPERTIES ACCD TO
MFR
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID BREATHING OF DUST. SCOOP UP MATERIAL OR
FLUSH W/WATER TO CHEMICAL SEWER.
====================== Handling and Storage ======================
Handling and Storage Precautions:FORE IN CLOSED CONTAINERS AT AMBIENT
CONDITIONS.
Other Precautions:WASH THOROUGHLY AFTER HANDLING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:MFR STATES NONE FOR NOMAL USE
Ventilation:LOCAL EXHST:MAINTAIN ADEQ VENTIL. MECH: AS IN FLUX OPERATN
Protective Gloves:RUBBER
Eye Protection:CHEM SAFETY GOGGLES
Other Protective Equipment:EQUIPMENT NORMALLY USED IN OPERATION.
Supplemental Safety and Health
SPECIFIC GRAVITY MEASURED AT 72F. ONE POUND CAN CONTAINER SIZE.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.55
Solubility in Water:MODERATE
Appearance and Odor:WHITE POWDER W/ NO CHARACTERISTIC ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:KEEP DRY:SLOWLY ABSORBS ATMOSPHERIC OR
FREE WATER.
Hazardous Decomposition Products:NONE(MFR)
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECM ISOLATED PROTECTED DUMPING OR
CONTROLLED BURNING IF IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***