=====================  Product Identification  =====================

MSDS NAME:QUICK DRY ENAMELS, 54-B (041390M)
NIIN:00N026619
MSDS Number: CFNQV
=== Responsible Party ===
Company:PPG INDUSTRIES INC
Address:260 KAPPA DR
City:PITTSBURGH
State:PA
ZIP:15325
Country:US
Info Phone Num:800-441-9495
Emergency Phone Num:204-843-1200
CAGE:47695
=== Contractor Identification ===
Company:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Name:ING 9: NOT EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR MAN.
    SIGNS & SYMPS OF OVEREXP: EYE WATERING, HDCH, NAUS, (ING 11)
RTECS #:9999999ZZ

Name:ING 10: DIZZ, & LOSS OF COORDINATION ARE INDICATIONS THAT
    SOLVENT LEVELS ARE TOO HIGH. REDNESS, ITCH, BURNING (ING 12)
RTECS #:9999999ZZ

Name:ING 11: SENSATION & VISUAL DISTURB MAY INDICATE EXCESS EYE
    CONT. DRYNESS, ITCH, CRACKING, BURNING, REDNESS, & (ING 13)
RTECS #:9999999ZZ

Name:ING 12: SWELLING ARE CONDITIONS ASSOCIATED WITH EXCESSIVE
    SKIN CONTACT.
RTECS #:9999999ZZ

Name:FIRST AID PROC: INGEST EXCESSIVE EXPOS TO CORROSIVE
    MATERIAL, PERSISTENT SKIN/EYE IRRIT/BREATHING DIFFICULTIES.
RTECS #:9999999ZZ

Name:RESP PROT: TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH THE
    RESPIRATOR IS EFFECTIVE AND HOW IT IS TO BE PROPERLY FITTED.
RTECS #:9999999ZZ

Name:VENT: LEL BELOW STATED LIMIT, & TO REMOVE DECOMP PRODS
    DURING WELDING/FLAME CUTTING ON SURFACES COATED W/THIS PRODUCT.
RTECS #:9999999ZZ

Name:ALUMINUM SILICATE
CAS:1335-30-4
Fraction by Wt: 30-35%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PIGMENTS
Fraction by Wt: 15-20%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM
    ALIPHATIC SOLVENT NAPHTHA)
CAS:64742-88-7
Fraction by Wt: 2-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)
CAS:64475-85-0
RTECS #:PY8240000
Fraction by Wt: 25-30%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM
    ALIPHATIC SOLVENT NAPHTHA)
CAS:64742-88-7
Fraction by Wt: 40-45%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:XYLENE (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 2-5%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 70-75%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:EFTS OF OVEREXP: POTENTIAL FOR INHAL OF TITANIUM DIOXIDE
    DUSTS FROM COATINGS IS VERY LIMITED. SINCE OVEREXP ARE (ING 10)
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
    SWALLOWED. EYES: SEV IRRIT. SKIN: MOD IRRIT. INHAL: VAP & SPRAY
    MIST MAY BE HARMFUL. VAP IRRITATES EYES, NOSE & THROAT. RPTD EXPOS
    TO HIGH VAP CONCS MAY CAUSE IRRIT OF  RESP SYS & PERM BRAIN & NERV
    SYS DMG. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
    INHALING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CONTENTS CAN BE HARMFUL/FATAL.
    CHRONIC: AVOID LONG TERM & RPTD CONT. PROD CONTAINS TITANIUM
    DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN
    LONG-TERM STUDY DEVELOPED LUNG  TUMORS. STUDIES W/HUMANS INVOLVED
    IN MANUFACTURE OF PIGMENT INDICATE NO INCRD RISK OF CANCER FROM
    EXPOS. (ING 9)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH IMMED W/PLENTY OF
    WATER FOR AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING FOLLOWED
    BY WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO FRESH
    AIR. APP LY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. IF
    ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD, CONT
    POIS CTL CTR EMER ROOM/MD IMMED. HAVE MSDS INFO AVAIL. (ING 14)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:0.9%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
    CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
    (SUP DAT)
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
    CLSD CONTRS TO PVNT PRESS BUILD-UP & (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPKS, & OPEN FLAMES. CLSD CONTRS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. DO NOT APPLY ON (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
    NIOSH APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA.
    REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
    VERMICULITE/OTHER ABSORB MAT L & PLACE INTO CONTRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE > 120F. STORE LGE QTYS IN
    BDGS DESIGNED & PROTECTED FOR STOR OF NFPA CLASS II COMBUST LIQS.
    CONTRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
    SYS, READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS
    THE RESULTING MIXURE MAY HAVE HAZARDS OF ALL OF ITS PARTS. AVOID
    FREE FALL OF LIQ  IN EXCESS OF A FEW INCHES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
    VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) PAINT
    SPRAY/AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ RESP
    MFR'S INSTRUCTIONS & L ITERATURE CAREFULLY TO DETERMINE(ING 15)
Ventilation:PROVIDE ADEQ DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
    KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 16)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUBBER/PVA.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
    SHOWER . WEAR PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC: POSS
    AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
    NOZZ ARE PREF. EXPLO HAZ: HOT SURF. TOX GASES MAY FORM WHEN PROD IS
     CONTACTED BY FLAME/HOT SURF. HAZ DECOMPPROD: FUMES INCL CARBON
    MONOXIDE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.3
Evaporation Rate & Reference:<19 (BUTYL ACETATE=1)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACTERISTIC OF SOLVENTS
    LISTED IN INGREDIENTS SECTION
Percent Volatiles by Volume:<85

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
    HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/THIS PROD
    MAY PRODUCE (SUP DAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
    EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
    APPROVED WASTE MANAGEMEN T FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***