=====================  Product Identification  =====================

MSDS NAME:AP GREASE
NIIN:00N019674
MSDS Number: CFNPF
=== Responsible Party ===
Company:STATE CHEMICAL MFG CO
Address:3100 HAMILTON AVE
City:CLEVELAND
State:OH
ZIP:44114
Country:US
Info Phone Num:216-861-7114
Emergency Phone Num:216-861-7114
CAGE:53798
=== Contractor Identification ===
Company:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798

=============  Composition/Information on Ingredients  =============

Name:MINERAL OIL, PETRO DISTILLATES, HYDROTREATED (SEVERE) HEAVY
    NAPHTHENIC; (SEVERELY HYDROTREATED NAPHTHENIC DISTILLATE)
CAS:64742-52-5
RTECS #:PY8035001
Fraction by Wt: <88%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3 (MFR)

Name:METAL DIALKYLDITHIOCARBAMATE
CAS:15890-25-2
Fraction by Wt: <3%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3 (MFR)

Name:POLYDIMETHYL SILOXANE; (LATEX SUSPENSION)
CAS:9016-00-6
RTECS #:TQ2690000
Fraction by Wt: <1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PROPENE, 2-METHYL-, POLYMERS; (POLYISOBUTYLENE)
CAS:9003-27-4
RTECS #:UD1010000
Fraction by Wt: >1%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3 (MFR)

Name:QUATERNARY AMMONIUM COMPOUNDS, BIS(HYDROGENATED TALLOW
    ALKYL) DIMETHYL-, SALT WITH BENTONITE; (RHEOLOGICAL THICKENER)
CAS:68953-58-2
RTECS #:UZ2996400
Fraction by Wt: >6%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE CONTACT MAY CAUSE
    IRRITATION. SKIN CONTACT MAY CAUSE IRRITATION. INGESTION MAY CAUSE
    NAUSEA, VOMITING OR DIARRHEA. CHRONIC:NONE EXPECTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . INGEST:CALL MD OR POISON CONTROL CENTER IF MORE THAN 1/2
    PINT IS INGESTED. EYES:FLUSH IMMEDIATELY W/PLENTY OF COOL WATER FOR
    A T LEAST 15 MINUTES. IF IRRITATION PERSISTS, CALL MD. SKIN:WASH
    W/SOAP & WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:480F,249C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE OR FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . USE WATER TO COOL FIRE EXPOSED CNTNRS, STRUCTURES & TO
    PROT PERS. WATER/FOAM MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:EMPTY CONTAINERS MAY RETAIN PRODUCT
    RESIDUE INCLUDING FLAMMABLE EXPLOSIVE VAPORS. DO NOT CUT, DRILL,
    GRIND/WELD ON/NEAR FULL, PART FULL, NEAR FULL/EMPTY CNTNRS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB IN SAND OR OIL ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:READ & FOLLOW ALL LABEL DIRECTIONS &
    PRECAUTIONS BEFORE USING PRODUCT. THESE PRODUCTS ARE INTENDED FOR
    INDUSTRIAL & INSTITUTIONAL USE ONLY.
Other Precautions:NOT FOR HOUSEHOLD USE OR RESALE. KEEP OUT OF REACH OF
    CHILDREN. DO NOT REUSE EMPTY CONTAINERS. DESTROY BY CRUSHING OR
    RETURNING TO DRUM RECONDITIONER. DO NOT USE CUTTING TORCH NEAR
    CNTNRS/GREASE SINCE  MATL WILL BURN AT HIGH TEMP (>450F).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NOT REQUIRED.
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.8 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE GEL W/PETROLEUM ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY RELEASE CARBON MONOXIDE IF BURNED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REMOVE TO LANDFILL, INCINERATE. FOLLOW ALL
    FEDERAL, STATE & LOCAL REGULATIONS REGARDING WASTE DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***