=====================  Product Identification  =====================

MSDS NAME:STATE TUF BUDDY, PART A
NIIN:00N082792
Kit Part:Y
MSDS Number: CGDPV
=== Responsible Party ===
Company:STATE CHEMICAL MFG CO
Address:3100 HAMILTON AVE
City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Info Phone Num:908-458-5821
Emergency Phone Num:908-458-5821
CAGE:53798
=== Contractor Identification ===
Company:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (DIGLYCIDYL ETHER OF
    BISPHENOL A)
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: <70%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PHENOL, 4,4'-ISOPROPYLIDENEOL-; (BISPHENOL A) (SARA 313)
CAS:80-05-7
RTECS #:SL6300000
Fraction by Wt: <20%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIRECT CONTACT WITH EYES CAN
    CAUSE IRRITATION. PROLONGED OR REPEATED WITH THE SKIN CAN CAUSE
    SENSITIZATION OR OTHER ALLERGIC RESPONSES. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGESTION: CONTACT MD OR POISON CONTROL CENTER IMMEDIATELY.
    INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN OR
    ARTIFICIAL RESPIRATION) . EYES: FLUSH IMMEDIATELY WITH PLENTY OF CO
    OL WATER FOR AT LEAST 15 MINTUES. IF IRRITATION PERSISTS, CONTACT
    MD. SKIN: WASH THOROUGHLY WITH PLENTY OF SOAP AND WATER. IF
    IRRITATION PERSISTS, CONTACT MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WHEN POSSIBLE, MIX A COMPONENT WITH B
    COMPONENT AND ALLOW TO CURE TO AN INERT, HARMLESS SOLID; OTHERWISE
    ABSORB SPILL WITH INERT ABSORBENT MATERIAL. SWEEP OR SCOOP UP. WASH
    AREA WITH DETERGENT AND WAT ER. PREVENT WASHINGS FROM ENTERING
    WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID DIRECT CONTACT WITH EYES OR
    SKIN. DO NOT TAKE INTERNALLY. STORE CONTAINERS AT ROOM TEMPERATURE.
    KEEP TIGHTLY CAPPED WHEN NOT IN USE.
Other Precautions:READ AND FOLLOW ALL LABEL DIRECTIONS AND PRECAUTIONS
    BEFORE USING THE PRODUCT. THESE PRODUCTS ARE INTENDED FOR
    INDUSTRIAL AND INSTITUTIONAL USE ONLY. NOT INTENDED FOR HOUSEHOLD
    USE OR RESALE. KEEP OUT  OF THE REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR IF VENTILATION IS
    INADEQUATE.
Ventilation:NORMAL LOCAL VENTILATION IS APPROPRIATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH AND DELUGE
    SHOWER . RECOMENDED COVERALLS OR APRON TO MINIMIZE CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.02 (H*2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:BLACK PASTE WITH AN EPOXY RESIN ODOR
Percent Volatiles by Volume:<10 WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, BASES, AMINES & MERCAPTANS. DO NOT MIX EITHER
    PARTS W/ANY OTHER CHEM OTHER THAN OTHER PART.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:BURNING MAY RESULT IN FORMATION OF
    CARBON DIOXIDE, CARBON MONOXIDE, OR OXIDES OF NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT REUSE EMPTY CONTAINERS FOR ANY PURPOSE.
    TIGHTLY CAP EMPTY CONTAINERS WITH ORIGINAL LIDS, WRAP AND PUT IN
    TRASH. FOLLOW ALL FEDERAL, STATE AND LOCAL REGULATIONS REGARDING
    WASTE DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***